• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1421-1432
• /
• 1994

The optimum design and performance of noncoherent TDL considering the effect of distortions due to the IF bandpasss filters are described. NRZ data and ideal filter is presumed in the simulation. The optimum filter bandwidth is calculated in the sense of minimizing the loop's squaring loss, which is equivalent to minimizing the loop's tracking jitter for a given data rate and data signal-to-noise ratio. As a result, the optimum filter bandwidth depends on the signal-to-noise ratio, and is obtained in the range of about 1-2 times of the data rate.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.75-76
• /
• 2007

이 논문에서는 IS-95와 WCDMA의 Multi-mode로 동작하는 Multi-mode용 저전력 DDC filter 구조를 제안한다. 기존의 DDC구조의 경우 CIC의 통과대역 특성을 향상시켜 주지만, 저지대역의 감쇠특성은 오히려 나빠지는 문제점을 안고 있었다. 제안된 구조는 CIC 데시메이션 필터의 통과대역 특성은 더욱 향상시켜주며, 저지대역의 감쇠특성도 같이 향상시키는 특징을 가진다. 또한 제안된 절터는 각 필터의 면적을 감소시키기 위해 IS-95와 WCDMA의 각각의 모드에 대해 한 개의 필터를 설계한 후 각 모드에 따라 필터 탭 수를 달리하여 동작하는 Multi-mode의 저전력 구조로 구현하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1305-1312
• /
• 2000

This paper presents the design and implementation of the CPW end-coupled band-pass filter with the finitely backed conductor (FBC). To reduce the large insertion loss in CPW structure, the improvement in loss characteristic through the change of CPW structure is introduced. The CPW filters with narrow bandwidth are suggested and characterized for their microwave performance using the finitely backed conductor. This structure

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.1909-1913
• /
• 2008

In this paper, A compact ultra-wideband(UWB) bandpass filter(BPF) with WLAN notched filter has been proposed. H-shared slot is studied and adopted to tighten the coupling of inter-digital capacitor in order to improve the BPF's performance. Three pairs of tapered defected ground structures(DGS) are formed to assign their transmission zeros towards the out of band signal, thereby suppressing the spurious passband. Also Meander line slot is de#eloped to reject the undesired wireless local-area network(WLAN) radio signals. That's combining these three structures we obtain a small sized UWB BPF.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.77-83
• /
• 2004

Parallel coupled microstrip bandpass filter is widely used in microwave circuits. But this filter limits the filter applications because of the narrow bandwidth and the spurious passband at twice the basic passband frequency. In order to solve this problem, a method of the asymmetrical coupled microstrip lines on composite dielectric substrate is presented. Closed form method is used to analyze the asymmetrical coupled microstrip lines on composite dielectric substrate. An experimental filter is fabricated over $33\%$ bandwidth centered at 9GHz. Compared with the filter on a single substrate, this filter on composite substrate shows improvement of the spurious passband.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.505-513
• /
• 1996

In this paper the dual-mode bandpass filters with a Chebyshev response are designed and manufactured at Ku-band as well as K-band. Manufactured filters are resonated by two independent orthogonal $TE_{113}$ circular-cavity modes and characterized by 4-pole Chebyshev function. One is operating at a center frequency of 12.5GHz with a bandwidth of 100MHz and the other, a center frequency of 19.25GHz with 120MHz, respectively. The measureed experimental results of a 12.5GHZ dual-mode filter ahve a 1.2dB intertion loss in the passband and 65dB out-of-rejection, and a 19.25GHz filter has a 1.55dB insertion loss and 70dB out-of-rejection. These experimantal results shoults show good agreements with the design specifications.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.36-40
• /
• 2013

A novel design method of ultra wideband bandpass filter using CRLH transmission line with Dumbell type DGS is presented in this paper. Defected Ground Structure and microstrip interdigital capacitor are used to design the ultra wideband (UWB) filter. CRLH transmission line has composite characteristics of low pass and high pass filter. As control of cutoff frequency of low pass and high pass response on CRLH transmission line, we can get characteristic of UWB filter. We designed and simulated for CRLH transmission lines with one, two, four, and eight cells. A UWB filter using four cells CRLH is designed and fabricated to verify the results. The characteristics of designed filter have center frequency of 5GHz and relative bandwidth of 88%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.438-446
• /
• 2005

In this paper, the modified generalized Chebyshev rational function is presented. The new element values of prototype low pass filter are obtained by network synthesis using this rational function. This proposed filter has an equal ripple passband as same as conventional generalized Chebyshev filter, but unlike conventional filter which has only one attenuation pole at finite frequency, the proposed filter has two different from each other attenuation pole in stopband. If the harmonic frequency is set to the second attenuation pole frequency, this harmonic is suppressed efficiently. Furthermore, since the location of the second attenuation pole can be arbitrary adjusted. our filters are very available for the realization of wide stopband, particularly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.630-638
• /
• 2001

This paper has been proposed a structure composed of FIRs and IIR filters as digital decimation filter to compensate the drooping inband on the high precision AU chips. The area of chip has been reduced compared with the conventional structure because the RAM and MAC is reduced. The passband ripple$(\leq\; 0.4535 \times fs)$, passband attenuation(at $\; 0.4535 \times fs$ and stopband attenuation$(\geq\; 0.59\times fs)$ of the 6th-order $\Delta\Sigma$ modulator and digital decimation filter had $\pm0.0007[dB]$, -0.0013[dB] and -110[dB] respectively. Also the inband group delay, which was almost same compared with the conventional digital decimation filter structure, was 30.07/fs[s] band the error of group delay was 0.1672%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.28-35
• /
• 2010

In this paper, we designed and fabricated a ultra-wideband(UWB) bandpass filter with a good performance of a stopband, and a notched band in passband. The transformed equivalent circuit of the highpass filter was realized by distributed element. A wide-passband with 3-dB fractional bandwidth of more than 100 % was achieved by using optimum response of the HPF. For improving lower and upper stopband characteristic, a cross coupling between feed lines was employed, which was analyzed by desegmentation technique. In order to reject interference of Wireless LAN and Hyper LAN(5.15~5.825 GHz), the narrow notched(rejection) band was realized by a spurline. The fabricated BPF indicated the passband from 3.1 to 10.55 GHz and the flat group delay of less than 0.94 ns over the entire passband except the rejection band. The filter shown sharp attenuation both inside and outside the band and notched band from 5.2 to 6.12 GHz.