• Electronics and Telecommunications Trends
• /
• v.16 no.6 s.72
• /
• pp.92-100
• /
• 2001

본 논문에서는 국내 기술기준에서 정하고 있는 주파수 호핑 스펙트럼 확산(FHSS) 방식을 사용하는 무선기기에 대한 전파의 질 측정항목과 그에 따른 구체적인 전도성 측정절차에 관하여 서술하였다. 본문에서는 측정에 관련된 일반적인 사항으로부터 주파수 허용편차, 점유주파수대역폭, 공중선전력, 불요발사, 호핑 주파수의 체류시간, 중첩성 및 호핑의 개수 등의 항목들에 대한 세부적인 측정절차와 함께 예시로써 블루투스(bluetooth) 기기를 이용한 실제 측정결과를 함께 제시하고 있다.

• Journal of KIISE:Information Networking
• /
• v.32 no.5
• /
• pp.641-649
• /
• 2005

Metro networks use the existing circuit-switching technology like SONET/SDH. Such circuit-switching based networks are inefficient in tarrying Internet traffic with bursty nature. Therefore, metro networks can become a bottleneck In order to resolve this problem, the IEEE 802.17 working group has proposed the RPR (Resilient Packet Ring) technology. In addition to this, the RPR fairness mechanism has been defined to provide fairness among the stations in the RPR network. However, the current RPR fairness mechanism has the problem of inefficient use of the available bandwidth after when the congestion at a node is resolved. In this paper, we propose an improved bandwidth allocation mechanism in which, after the congestion resolution at a node, the node estimates the number of nodes transmitting data and measures the remaining bandwidth and fairly allocates the available bandwidth to active nodes. To show the performance of our proposed mechanism, we have performed simulation and showed that the proposed mechanism offers higher bandwidth utilization.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.393-400
• /
• 2002

In this paper, a novel series feeding cross-aperture coupled microstrip antenna with the effect of hybrid feeding is proposed and demonstrated experimentally to improve narrow axial ratio bandwidth of cross-aperture coupled antenna with single feeding among the various methods for generating circular polarization. The validity of a proposed series feeding cross-aperture coupled microstrip antenna is shown by comparing experimental results between the reported and the proposed microstrip antenna, and 2${\times}$2 array microstrip antenna based on the proposed single microstrip antenna used sequential rotation technique to accomplish broader axial ratio bandwidth. In the proposed single and 2${\times}$2 array microstrip antenna, the measured axial ratio bandwidths are 110 ㎒(4.6%) and 420 ㎒(17.5%), maximum gains are 8.2 ㏈i and 12.5 ㏈i, 3 dB gain bandwidths are above 400 ㎒(16.7%), and impedance bandwidths for the VSWR<1.5 are 240 ㎒(10%) and 500 ㎒(20.8%), respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.78-83
• /
• 2006

In this paper, we propose Active bandwidth allocation scheme of multiplexed streamed MPEG video sequences over BcN network. In order to real time processing, multiplexed source is estimated by linear-prediction per measurement period. n the result target quality value were not sufficient, we proposed a over-allocation method and a reallocation one to guarantee QoS. We used two kinds of sources, one is random multiplexed source made of four different video sources, the other is the one considered the arrange of I frame in the sequence. With those sources, we analyzed the linear prediction, compared over-allocation with reallocation method. As a result, In both schemes, the objected target quality value is achieved, the sufficient valuce bandwidth under 10% when measurement period is over 1.8 sec, the utilization is over 0.9. Especially, the Target of quality value of the reallocation scheme is better at the same condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2275-2282
• /
• 1999

In ATM networks, bandwidth allocation using available bandwidth is important to control ABR traffic efficiently. However, it is difficult to dynamically assign bandwidth on bursty traffic, because the tracking of the existing available bandwidth information uses statistical value. In this paper, we propose a output-bufferd ATM switch using Per-VC queueing scheme with timer and Controller. The controller determines whether each VC is in congestion state or not, and the timer can assign dynamically as determining the available bandwidth for the Present period by Backlogged time and total link capacity, and then transmitting the determined bandwidth to source. Instead of using statistical parameters, the proposed scheme can improve link efficiency as allocating the bandwidth of the next period, by use of measured bandwidth during the current period.

• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.813-823
• /
• 2018

UHD content is characterized by higher bandwidth requirements to provide seamless playback. The existing HTTP adaptive streaming scheme periodically requests video segment of lower quality than the available bandwidth in the steady state. In the steady state, the On-Off pattern is repeated due to the difference of the available bandwidth and the encoding rate of the content. And the repeated Off interval is causing the problem that can not efficiently use the available bandwidth. In the wireless environment where the delay and loss rate are higher with large bandwidth fluctuations, this problem is exacerbated because the available bandwidth is estimated inaccurately. Therefore, in this paper, we propose a segment scheduling scheme for efficient bandwidth utilization of UHD contents streaming in wireless environment. Proposed scheme is a group segment that simultaneously reqeusts multiple segments in one request message in order to reduce frequency of OFF interval. Through simulation, Our scheme improves bandwidth utilization.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.9-16
• /
• 2005

The performance of satellite range measurement using tone method was analyzed in the presence of satellite link AWGN. The phase errors in range measurement are generated by AWGN of satellite up- and down-link and the degradations of satellite range measurement are dependent on the transmission mode and loop bandwidth of satellite measurement system. The analyzed effects for satellite measurement in presence of satellite link noise were also analyzed with the measured satellite range data via satellite range measurement system operating in satellite link AWGN. In RAU mode, the satellite range differences of 14.4 to 40.6 m were occurred according to the loop bandwidth of satellite range measurement system and the degradation of 0.3 dB compared with theoretical value was generated under condition of the signal-to-noise ratio of 43 dB. In RAU and TM mode, the performances of range measurement were approximately agreed to the that of RAU mode. In order to get the equal performance characteristics with RAU mode, the signal-to-noise ratio of satellite link for RAU and TM mode should be increased by signal power of 2.3 dB, which is a power loss due to transmission of telemetry signal.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.748-754
• /
• 2000

A novel single feed wide band CP stacked microstrip antenna using crossed slots has been designed, fabricated and measured. For the single rediating element the designed 10dB return loss bandwidth is 34.5%99.45~13.54 GHz), 3dB axial ratio bandwidth is 18.7%(11.17~13.39GHz), and 6 dB gain bandwidth is 29%(10.21~13.64GHz). For the 2$\times$2 array designed using a sequential rotation method, the 10dB return loss bandwidth is 35.9%(9.69~13.94GHz), 3dB axial ratio bandwidth is 34.6GHz (9.93~14.03GHz), and 6dB gain bandwidth is 27.4%(10.35~13.6GHz). For the fabricated 8$\times$8 array antenna, the 10dB return loss bandwidth is 27.3%(10.17~13.41GHz), 3dB axial ratio bandwidth is 27.9GHz(10.1~13.4GHz), and the radiation pattern is good agreement with theory. This antenna can be used for broadband applications for communications or broadcasting in Ku band.

• Electronics and Telecommunications Trends
• /
• v.16 no.6 s.72
• /
• pp.117-125
• /
• 2001

본 고에서는 최근 무선데이터 통신시스템용으로 2.4GHz 대역에서 블루투스 등 새로운 통신기기가 출현함에 따라서 이러한 기기에서 사용되는 여러 확산방식 중 직접열확산방식을 중심으로 하여 국내의 기술기준에 근거한 일본, 미국, 유럽의 측정방법에 대하여 검토하였다. 이러한 검토를 통하여 다양한 측정 방법들이 갖는 특징과 차이점들을 분석하여 국내에 적용할 수 있는지를 검토하고자 한다. 그리고 점유주파수대역폭, 주파수 허용편차, 공중선전력, 불요발사 등의 세부적인 항목을 함께 다루며, 각각의 측정 항목에 관한 구체적인 방법과 절차를 살펴볼 것이다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.2
• /
• pp.61-68
• /
• 1991

장해전자파의 스펙트럼은 일반적으로 넓은 주파수범위에 분포하며, 파형도 불규칙하게 변한다. 보통 잡음의 측정은 규정된 통과대역폭을 갖는 수신기에 의해 수신, 증폭하여, 그 출력을 전압계에 지시시 키는 방법에 의하는데, 수신기의 선택도 특성이나 전압계에 사용하는 검파기의 방식이 다르면 동일한 잡음 이라도 그 측정결과는 일반적으로 같은 값으로는 되지 않는다. 따라서 측정에 있어서는 잡음의 어떠한 성 질을 측정대상으로 하는가에 따라 측정기의 방식을 선택하는 것이 필요하다. 장해전자파의 성질을 나타내 는 물리량으로서는 실효값, 첨두값, 평균값 등이 있으며, 또한 장해전자파의 물리적성질을 구하는 것이 아 니고, 통신이나 방송의 수신에 대한 장해의 정도를 구하기 위한 측정에서는 장해에 대한 수신자의 주관적 인 평가를 측정의 척도로 하는 것이 바람직하다.