• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.85-89
• /
• 2016

In this paper, we studied effects of tilting angle of band pass filter on the characteristics of fluorescence imaging system. Theoretical modeling showed that transmittance and filtering range are highly dependent on the tilting angle. Measurements on transmittance as a function of wavelength confirmed that changes in transmittance and the band filter range are in good agreement with theoretical prediction. Therefore, characteristics of band pass filter can be precisely tuned by altering tilting angle of band pass filter in order to enhance fluorescence signal in bio imaging system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.12
• /
• pp.915-923
• /
• 2018

A concrete embedded antenna design is proposed for probing the durability of a building at an industrial scientific medical band of 902~908 MHz. The proposed antenna is designed with a stacked slot patch structure for lower impedance variation to a dielectric constant of concrete, as a dielectric constant difference is derived from the moisture content. The proposed structure has a wider bandwidth when a parasitic patch structure is used, which reduces antenna performance degradation resulting from the moisture content of concrete. The measured voltage standing wave ratio of the proposed structure is less than 2 and the beam width is approximately $80^{\circ}$, whereas the gain is greater than 7 dBi. The proposed antenna is fabricated with a rectangle-type concrete block, which is simulated and measured for return loss and antenna gain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.5
• /
• pp.418-429
• /
• 1996

The number of bits per message and the number of tones in the frequency-hopping sequence are determined by the available bandwidth and the data rate of each user. These parameters in turn determine the tone duration which strongly influences the vulnerability of the system to transmission distortions. In this paper, an address code which is assigned to each individual user was employed in order to reduce the collisions or hit. Also the frequency band is divided into several subbands and each user transmits multitone frequency per subband per chip. And the new system which is to increase the duration of each tone by increasing the total number of system frequencies that has been proposed. It is found that an optimum value bit, tone, number of frequencies per chirp can improve the err performance. This flexibility slightly increases maximum efficiecy and makes the the system less vulnerable to multipath delay. So, It is found that as the nuber of user increased 50%, the efficiency as a tuncion of the bandwidth to user'rate ratio improve 20%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3B
• /
• pp.325-338
• /
• 2004

As the recent rapid development of internet technology and the wide spread of multimedia communication, massive increase of network traffic causes some problems such as the lack of network paths and the bad quality of service. To resolve these problems, this paper presents a traffic control agent that can perform the dynamic resource allocation by controlling traffic flows on a DiffServ network. In addition, this paper presents a router that can support DiffServ on Linux to support selective QoS in IP network environment. To implement a method for selective traffic transmission based on priority on a DiffServ router, this paper changes the queuing discipline in Linux, and presents the traffic control agent so that it can efficiently control routers, efficiently allocates network resources according to service requests, and relocate resources in response to state changes of the network. Particularly for the efficient processing of Assured Forwarding(AF) Per Hop Behavior(PHB), this paper proposes an ACWF$^2$Q$^{+}$ packet scheduler on a DiffServ router to enhance the throughput of packet transmission and the fairness of traffic services.s.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.772-783
• /
• 2005

In this paper, we propose an effective multicasting protocol in wireless ad-hoc networks. Conventional wired and wireless network multicast protocols do not perform well in wireless ad hoc networks because they were designed without consideration of ad hoc environments such as node mobility, limited bandwidth, high error probability. To solve this problem, some multicasting protocols for ad hoc network have been proposed in the literature. However, these protocols can not provide high packet delivery ratio, low control packet overhead and low expended bandwidth at the same time. Therefore, in this paper, we propose RTMA that improves multicasting performance in wireless ad hoc networks. RTMA calculates its current region from its position information by using GPS in order to make tree among the multicast group nodes in the same region. The proposed region-based tree method is for high packet delivery ratio, low control packet overhead when many senders send data packets. RTMA makes a reliable tree by using speed information to fill a gap of the weak points of the tree structure. When searching the routing path, RTMA selects the reliable path excluding high speed nodes.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.52-60
• /
• 1999

Fabricability of phase shifted grating filters has been theoretically studied by an effective index transfer matrix method. In the optical band-pass filter with multiple ${\lambda}/4$ phase-shifts, the phase-shift error and random variation of the grating period should be suppressed such that corresponding resonance frequency lies within, the filter pass-band. The tolerance for the relative error is less than $10^3$, and is quite stringent in typical filters for WDM application. End facet reflection produces ripple in the transmission spectra and the reflectivity should be less than 1% in order to keep the ripple less than 0.25dB. Also, the effect of waveguide absorption loss is enhanced by the resonance in the filter, and the absorption should be limited to 1dB/cm for the signal loss of less than 0.2dB.

• Korean Journal of Optics and Photonics
• /
• v.21 no.4
• /
• pp.175-178
• /
• 2010

A transmission type color filter based on a thin film Ag-$SiO_2$-Ag etalon was proposed and realized in a quartz substrate. The device could acquire infrared suppressed transmission and wide effective area compared to costly e-beam lithography and laser interference lithography. The FDTD method was introduced to take into account the effect of the dispersion characteristics of the silver metal and the thickness thereof. Three different color filters were devised: The cavity length for the red, green and blue filters were 160 nm, 130 nm, and 100 nm respectively, with the metal layer unchanged at 25 nm. The observed center wavelengths were measured at 650 nm, 555 nm, and 480 nm for the red, green, and blue devices; the corresponding bandwidths were about 120 nm, 100 nm, and 120 nm; and the peak transmission for all was ~60%. Finally the relative transmission was measured to decline with the angle of the incident beam with the rate of 1%/degree.

• Journal of Internet of Things and Convergence
• /
• v.8 no.1
• /
• pp.53-58
• /
• 2022

Smoothing is a transmission plan that converts video data stored at a variable bit rate into a constant bit rate. In the study of [6-7], when a data rate increase is required, the frame with the smallest increase is set as the start frame of the next transmission rate section, when a data tate decrease is required. the frame with the largest decrease is set as the start frame of the next transmission rate section, And the smoothing algorithm was proposed and performance was evaluated in an environment where network traffic is not considered. In this paper, the smoothing algorithm of [6-7] evaluates the adaptive CBA algorithm and performance with minimum frame rate, average frame rate, and frame rate variation from 512KB to 32MB with E.T 90 video data in an environment that considers network traffic. As a result of comparison, the smoothing algorithm of [6-7] showed superiority in the comparison of the minimum refresh rate.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.6
• /
• pp.11-20
• /
• 2019

A Radome protects the radar from the external environment, and as a part of the stealth technology, a frequency-selective surface (FSS) was applied to the radome. Our study investigates the changes in the electrical transmission characteristics of the missile's FSS radome due to aerodynamic heating in various flight scenarios. Accordingly, we designed a FSS radome with a Jerusalem-cross(JSC) geometry and referred the missile flight scenario in the precedent research. Subsequently, electrical transmission characteristics affected by aerodynamic heating were numerically analyzed over time according to the position of radome. As a result, we found that the average transmission value maximally varies -14.3 dB compared to the initial bandwidth owing to changes in electrical transmission characteristics in flight scenarios.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.121-129
• /
• 1999

When continuous media are transmitted over the communication networks, asynchrony which can not maintain temporal relationships among packets may occur due to a random transit delay. There exist two types of synchronization schemes ; for guaranteed or non-guaranteed resource networks. The former which applies a resource reservation technique maintains delay characteristics, however, the latter supply a best-effort service. In this paper, I propose a intra-media synchronization scheme to transmit continuous media on general networks not guaranteeing a bounded delay tome. The scheme controls transmission times of the packets by estimating next delay time with the delay distribution. So, the arriving packets may be maintained within a limited delay boundary, and playout will be performed after buffering to smoothen small delay variations. The continually increasing delay due to network overload causes buffer underflow at the receiver. To solve it, the transmitter is required to speed up instantaneously. Too much increase of transmission-rate may cause network congestion. At that time, the transmitter drops the current packet when informed excessive delay from the receiver.