• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1159-1164
• /
• 2016

This study describes the design and implementation of SHF band Low Noise Amplifier of Digital Satellite Communication. We have applied to HEMT part to minimize Noise Figure of system. and minimized the potential for the occurrence of such erroneous operation of equipment through the simulations of the space environment. We designed a reliable Low Noise Amplifier through simulation for a TID according to the vibration generated during the launch and space radiation environment, and compared pre-simulation of main performance results to test results about main performances of Low Noise Amplifier after production.

• Annual Conference on Human and Language Technology
• /
• 1999.10e
• /
• pp.55-62
• /
• 1999

교차언어 문서검색에서는 단일언어 문서 상황을 만들기 위하여 질의나 문서를 다른 언어로 변환하게 되는데, 일반적으로 간단하면서도 실용적인 질의 변환의 방법을 주로 사용하고 있다. 하지만 단순한 대역 사전을 사용한 질의 변환의 경우에 변환 모호성 때문에 40% 이상의 검색 효과의 감소를 가져온다. 본 논문에서는 이러한 변환 모호성을 해결하기 위하여 대역 코퍼스로부터 추출한 상호 정보를 이용하는 단순하지만 효과적인 사전 기반 질의 변환 방법을 제안한다. 본 연구에서는 변환 모호성으로 발생한 다수의 후보들에서 가장 좋은 후보를 선택하는 모호성 해소 뿐 아니라 후보 단어들에 적절히 가중치를 부여하는 방법을 사용한다. 본 질의 변환 방법은 단순히 가장 큰 상호 정보의 단어를 선택하여 모호성 해소만을 적용하는 방법과 Krushall의 최소 스패닝 트리 구성과 유사한 방법으로 상호 정보가 큰 순서대로 간선들을 연결하여 모호성 해소와 가중치 부여를 적용하는 방법들과 질의 변환의 검색 효과를 비교한다. 본 질의 변환 방법은 TREC-6 교차언어 문서검색 환경의 실험에서 단일 언어 문서검색의 경우의 85%, 수작업 모호성 해소의 경우의 96%에 도달하는 성능을 얻었다.

• Annual Conference on Human and Language Technology
• /
• 2002.10e
• /
• pp.103-107
• /
• 2002

데이터 기반 기계번역의 성공여부는 대량의 데이터를 단기간에 구축하는 방법과, 또 구축된 데이터에 대한 효과적인 관리 방법이 좌우한다고 할 수 있다. 대표적인 데이터 기반 기계번역 방법론인 예제 기반 기계번역 방식이나 패턴 기반 기계번역 방식에서는 최소한의 학습 내지는 학습과정 없이 데이터를 구축하는 데에 연구가 중점적으로 이루어져왔으나, 데이터의 관리 문제에 대해서는 많은 연구가 이루어지지 못하였다. 그러나 데이터의 확장 못지않게 데이터의 효율적인 관리도 데이터 기반 기계번역 시스템의 개발에서 매우 중요하다. 이 논문에서는 사/피동 링크 등을 이용하여 사전을 재구성하는 것이 데이터의 일관성과 관리성을 향상시키고, 이론적인 면에서는 정보 기술상의 잉여성을 줄인다는 점을 보인다. 또한 이러한 정보에 기반하여 기구축된 동사구 패턴으로부터 대역어 정보를 이용하여 새로운 패턴을 만들어내는 방법론도 제시한다.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.54-60
• /
• 2016

In this paper, out-of-band emission regulations and measurement methods of terrestrial DTV broadcasting services are analyzed, and a novel method to evaluate the out-of-band emission characteristics of DTV transmitter is proposed. Experimental results show that proposed method can be easily used to measure the characteristics of DTV transmitter with inexpensive measuring equipments. With a few modifications, proposed method can be widely adopted to measure the RF performances of the general radio equipments efficiently.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.12-17
• /
• 2018

This study describes the design and implementation of Antenna for Digital Satellite Communication. The Antenna unit for SHF band consists of Reflector, Septom Polarizer, Feed Horn and Support Frame etc. Thought analysis of space environment before production, the possibility of the malfunction of equipment minimized and we designed a reliable Antenna through simulation for vibration and thermal analysis generated during the launch, and compared pre-simulation of main performance results to test results about main performances of Antenna after production. After fabricating the antenna, the maximum gain of the antenna main beam is 36.5dBi, which satisfies the requirement of 35dBi or more, and it also satisfies the requirement of -20dB for return loss of less than -24dB. Also, the isolation of the transmission and reception of the antenna is -22.6dB or less, which satisfies the requirement of -20dB or less. The antenna for digital satellite communication described in this paper can be used in the satellite field of geostationary earth orbit and low earth orbit requiring high reliability in the future.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1315-1320
• /
• 2015

In this paper Communication data link equipment on a high speed-hopping method to use the frequency resources efficiently for the frequency environment is introduced such as sensing techniques, using the same frequency band by using the received two-channel technique and the receive filter bank unit applied to be shared with other equipment such as radar and so on. The real-time measurement and analysis were operated for measurement the frequency environment of the operating band in advance. and primarily equipment to develop is analyzed how the interference effect to the radar minimize the operation of radar equipment. In reverse, to use the same frequency band the methods such as frequency sharing techniques are presented in this paper. Finally, by design of the main items of the RF transceiver NF, transmission output, and a simulation of the IMD, such as whether the key is verified prior to meet specifications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1025-1033
• /
• 2004

This paper covers the detection of covert direct sequence spread spectrum signal without the PN(Pseudo Noise) code information. Due to its low probability of interception, the difficulty of spectrum surveillance increases. Detection parameters are the signal existence of given bandwidth, the length of spreading sequence used by transmitter, and the identification of spreading code for detected chip length. The triple correlation function(TCF) value which is one of the higher order statistical signal processing techniques can be used to detect spread spectrum signal without a prior knowledge, but, it has weakness that TCF results depend on the spread data sequence in actual application. This paper proposes the new scheme that not only overcomes the weakness but also presents better performance than the traditional TCF scheme. The performance comparison of conventional TCF with proposed technique shows that the triple correlation estimator(TCE) has better detection capability.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.75-86
• /
• 2006

Target word selection is one of the most important and difficult tasks in English-Korean Machine Translation. It effects on the translation accuracy of machine translation systems. In this paper, we present a new approach to select Korean target word for an English noun with translation ambiguities using multiple knowledge such as verb frame patterns, sense vectors based on collocations, statistical Korean local context information and co-occurring POS information. Verb frame patterns constructed with dictionary and corpus play an important role in resolving the sparseness problem of collocation data. Sense vectors are a set of collocation data when an English word having target selection ambiguities is to be translated to specific Korean target word. Statistical Korean local context Information is an N-gram information generated using Korean corpus. The co-occurring POS information is a statistically significant POS clue which appears with ambiguous word. The experiment showed promising results for diverse sentences from web documents.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1122-1128
• /
• 2020

Bandwidth Extension refers to restoring and expanding a narrow band signal(NB) that is damaged or damaged in the encoding and decoding process due to the lack of channel capacity or the characteristics of the codec installed in the mobile communication device. It means converting to a wideband signal(WB). Bandwidth extension research mainly focuses on voice signals and converts high bands into frequency domains, such as SBR (Spectral Band Replication) and IGF (Intelligent Gap Filling), and restores disappeared or damaged high bands based on complex feature extraction processes. In this paper, we propose a model that outputs an bandwidth extended signal based on an autoencoder among deep learning models, using the residual connection of one-dimensional convolutional neural networks (CNN), the bandwidth is extended by inputting a time domain signal of a certain length without complicated pre-processing. In addition, it was confirmed that the damaged high band can be restored even by training on a dataset containing various types of sound sources including music that is not limited to the speech.

• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.288-296
• /
• 2016

A 400km/h simple catenary system was constructed as a test line in Korea. In the design stage of this system, the pre-sag was one of the engineering issues most focused on. It is known that the pre-sag improves the current collection performance in a certain band of high speed. However, the effect of pre-sag at 400km/h has not yet been established. To grasp a better pre-sag in the 400km/h catenary, we transacted the dynamic performance prediction simulation between catenary and pantograph under conditions of 0 and 1/3000 pre-sag. The level of 0 pre-sag was adapted for the 400km/h catenary design after reviewing predictions. We constituted the 1/3000 pre-sag sample section (about 1km) while constructing the 400km/h catenary test-bed (28km) of 0 pre-sag. With a HEMU-430X train, the contact forces were measured in the test-bed including the pre-sag sample section. In this paper, the predicted and measured dynamic performance values (contact forces) for 0 and 1/3000 pre-sag are described and compared. It is conclusively confirmed by analytical and experimental examination that the non pre-sag showed better dynamic (current collection) performance than that of the 1/3000 pre-sag for the 400km/h catenary system.