• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.4
• /
• pp.359-366
• /
• 2013

This study aims to investigate the characteristics of the flow-induced vibrations of two circular cylinders. The characteristics of the flow-induced vibrations are examined for various flow velocities and spaces between the two cylinders when they are arranged in tandem, staggered, and side-by-side positions. The results are as follows: (i) Seven flow-induced vibration patterns are observed when the two circular cylinders are placed in either tandem, staggered, or side-by-side positions. (ii) The two cylinders induce a vibration because they affect each other. (iii) The easiest way to induce a vibration of the two cylinders is by placing them in the side-by-side position among the three arrangements (tandem, staggered, and side-by-side). (iv) The change in the maximum flow-induced vibration of the two cylinders depends strongly on the fluctuating lift forces of each of them.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.5
• /
• pp.161-168
• /
• 2010

Practicing engineers and researchers need computational tools that estimate accurately the cyclic response of RC walls, and in particular, force and deformation capacities and their materials strains. So this paper describes a nonlinear truss modeling approach for reinforced concrete walls, or in general, for plane stress reinforced concrete elements subjected to cyclic reversals. Nonlinear vertical, horizontal, and diagonal truss elements are used to represent concrete and steel reinforcement. The wall having aspect ratio of 1.2 was chosen to be compared with the experimental results. Here, four types of main diagonal member models and three types of diagonal members models were applied to find out more accurate results of analysis.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.463-468
• /
• 2023

In this paper, we proposed reconfigurable dual polarization patch array antenna that can select two polarizations(Vertical, RHCP) using defected ground structure and Pin diode. The proposed antenna was designed arranging a circular polarization patch antenna implemented with a square microstrip patch and two slots 3x3 at 25.8mm placed, a half-wavelength of 5.8 GHz. Conect the pin diode and the capacitor to the slot diagonally placed on the ground of each antennas, and select polarization using the open/short operating according to the application of DC voltage to the pin diode. As a result of the design, the gain of the antenna is 11.7 dBi at vertical polarization and 11.6 dBic at RHCP. The axial ratio is 20.3 dB at 1.8 dB vertical polarization at RHCP. Mutual Coupling is Maximum to -20.8 dB for vertical polarization and Maximum to -30.1 dB for RHCP.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.1
• /
• pp.55-60
• /
• 2012

This experimental study investigated the characteristics of flow-induced vibration of two elastically supported circular cylinders in a side-by-side arrangement. In particular, the characteristics of the flow-induced vibration of the two cylinders are investigated by changing the flow speed at each spacing ratio L/D (L is the space between two cylinders and D is the diameter of the cylinder). To clarify the mechanism generating the flow-induced vibration of the cylinders, the flow patterns around the two vibrating cylinders are also investigated using a flow visualization test that reproduces the flow-induced vibration of the cylinders with a forced vibration apparatus. As a result, it is clarified that the flow-induced vibration characteristics of the two cylinders arranged side-by-side switch among four patterns as the flow between the two cylinders is switched. Among the three arrangements considered (tandem, staggered, and side-by-side), the arrangement that generates flow-induced vibration of the two cylinders most easily is the side-by-side arrangement.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.661-666
• /
• 2019

Diverging collimators is used to obtain reduced images of an object, or to detect a wide filed-of-view (FOV) using a small gamma camera. In the gamma camera using the diverging collimators, the block scintillator, and the pixel scintillator array, gamma rays are obliquely incident on the scintillator surface when the source is located the periphery of the FOV. Therefore, the spatial resolution is reduced because it is obliquely detected in depth direction. In this study, we designed a novel system to improve the spatial resolution in the periphery of the FOV. Using a tapered crystal array to configure the scintillation pixels to coincide with the angle of the collimator's hole allows imaging to one scintillation pixel location, even if events occur to different depths. That is, even if is detected at various points in the diagonal direction, the gamma rays interact with one crystal pixel, so resolution does not degrade. The resolution of the block scintillator and the tapered crystal array was compared and evaluated through Geant4 Application for Tomographic Emission (GATE) simulation. The spatial resolution of the obtained image was 4.05 mm in the block scintillator and 2.97 mm in the tapered crystal array. There was a 26.67% spatial resolution improvement in the tapered crystal array compared to the block scintillation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2193-2198
• /
• 2016

In this study, we propose an algorithm to simulate the function of the coupling structure and having two neurons to find out exactly recover the temporary or permanent position errors that can occur during operation in a digital circuit was separated by function, a $3{\times}3$ array. If any particular part in the combined cells are differentiated cells have a problem that function to other cells caused an error and perform the same function are subjected to a step of apoptosis by the surrounding cells. Designed as a function block in the function and the internal structure having a cell structure of this digital circuit proposes an algorithm. In case of error of module 4 of block 1 considered in this study, sum of all module numbers for horizontal direction, total module number sum for vertical direction, and sum of all module numbers for diagonal direction, We were able to find the location.

• Science of Emotion and Sensibility
• /
• v.18 no.3
• /
• pp.25-34
• /
• 2015

This paper investigates effective locations for two products in printed media advertisement (in which one is the relatively higher price product and the other is the relatively lower price product), and provides some insights on the effective locations of multiple products in printed media advertisements. For the research purpose, this paper develops 4 different versions of printed media advertisement and conducts an experiment study to compare consumers' responses on the different versions: Type A(the higher price product is located at the left side of advertisement, and the lower price product is located at the right side of advertisement), Type B(the higher price product is located at the right side of advertisement, and the lower price product is located at the left side of advertisement), Type C(the higher price product is located at the top side of advertisement, and the lower price product is located at the bottom side of advertisement), Type D(the higher price product is located at the bottom side of advertisement, and the lower price product is located at the top side of advertisement). The results of the experiment show that marketers can increase consumers' choices on the both products when they locate the higher price product at the left side or the top of advertisement and do the lower price product at the right or the bottom of advertisement.

• Communications of Mathematical Education
• /
• v.24 no.1
• /
• pp.195-220
• /
• 2010

The magic square is one of the number arrangements and the sums of each row, column, and diagonal are all equal. The meaning of "方" is "Square". If we don't consider the condition of 'square' then is it possible any number arrangement? There are many special number arrangements such as "magic five number circle(緊五圖)", "magic six number circle(聚六圖)", "magic eight number circle(聚八圖)", "magic nine number circle(攢九圖)", "magic eight camp circle(八陣圖)", "magic nine camp circle(連環圖)" in the ancient Chinese mathematics books such as "楊輝算法", "算法統宗". Also, there is a very special and beautiful number arrangement Jisuguimoondo(地數龜文圖) in the mathematics book "Goosuryak(九數略)" written by Choi suk jung(崔錫鼎) in the Joseon Dynasty. In this study, we introduce a various number arrangements and their properties.

• Archives of design research
• /
• v.11
• /
• pp.22-29
• /
• 1995

I have to find standpoint of sight moulding of Chi I Sung Hwa(seven stars picture) analysis of graphic systems of a symbol sight native to our nation. And I will comprehend emotion of folkways by simple and graphic lines and colors in mathematical Grid of which ancestor had expressed in gauge moulding consciousness. This papers aim is to make a contribution to lead by on part of communication design. About structural analysis of pictorial graphic side. I) Mathematical thought of the Orient and space constitution are first basically the Orient expressed number notion of mathematics of unlimitedness and notion of zero so called space and empty second can analigize a diagonal expansion method by development of symmetry notion to basic the dual principle of the negative and positive by degrees development expressed space division method by direction notion. 2) About the proportion analysis it based the golden section globularity and in modern layout it takes vision center of position, after appointing the brow of sacred image of Chil Sung Hwa as center point of proportion and applied to the point proportion and so analigized the posibility of established. Rule in union of each elements and rule of forms about picture image. 3) Mathematical structure analysis to search a unified principle at the balanced arrangement and rule of forms it analigized the standard the rule of forms. it analigized the standard the rule of forms to body module of basic movement of protagonist and follower above basic forms of grid that is the basis of design system.