• Clean Technology
• /
• v.29 no.4
• /
• pp.237-243
• /
• 2023

Aerogel is the most excellent insulation material known to date, but it is inflexible and has very low strength. A blanket containing aerogel in a nonwoven fabric or fiber is currently the most practical form. However, aerogel blankets are not yet widely used because they cannot avoid dust generation when handled, lack flexibility, and can possibly deform. In this study, vacuum treatment, surface treatment, and composite materialization technology were applied to solve this problem, and some prototypes were also made. If an aerogel blanket is wrapped in an aluminum sheet, sealed at the four ends, and vacuumed, it can become a material with better insulation than the blanket itself. An aerogel molded body can be made by coating the aerogel blanket with resin and treating the surface. If the aerogel blanket is multi-packed and laminated with resin or fiber in multiple layers to make it a composite material, it can be used as a flexible insulation material. In particular, this composite material, which utilizes a Teflon membrane with controlled pores, is breathable and waterproof, so it can be used for clothing. Prototypes of insoles for winter boots and outdoor roll mats were also produced using aerogel blanket resin and fiber composites. These prototypes showed low thermal conductivity of less than 20 mW m^-1K^-1, with good flexibility and durability.

• Clean Technology
• /
• v.29 no.4
• /
• pp.313-320
• /
• 2023

In order to increase the usability of H₂-SCR, the NOx removal characteristics with catalyst powder of PtNi/CeO₂-W-TiO₂ using Ce as a co-catalyst was synthesized and coated on a porous metal structure (PMS) were evaluated. Catalyst powder of PtNi/CeO₂-W-TiO₂(PtNi nanoparticles onto W-TiO₂, with the incorporation of ceria (CeO₂) as a co-catalysts) was synthesized and coated onto a porous metal structure (PMS) to produce a Selective Catalytic Reduction (SCR) catalyst. H₂-SCR with CeO₂ as a co-catalyst exhibited higher NOx removal efficiency compared to H₂-SCR without CeO₂. Particularly, at a 10wt% CeO₂ loading ratio, the NOx removal efficiency was highest at 90℃. As the amount of catalyst coating on PMS increased, the NOx removal efficiency was improved below 90℃, but it was decreased above 120℃. When the space velocity was changed from 4,000 h^-1 to 20,000 h^-1, the NOx removal efficiency improved at temperatures above 120℃. It was expected that the use of the catalyst could be reduced by applying the PMS with excellent specific surface area as a support.

• (The)Study of the Eastern Classic
• /
• no.55
• /
• pp.115-145
• /
• 2014

In this paper, the transition of the status of Chinese novels and the change of the knowledge field in the modern times from the end of 19th century to the early 20th century, the transition period between the tradition and the modern times, have been investigated based on Liang Qichao's assertion of the Revolution of the Novel World. How the traditional novels have been evaluated, how modern novels enlightened a people and changed the political society, and what role novels acted in the change of the knowledge field are investigated. Especially I looked into the accumulations of knowledge and changes inside China which were overlooked in the previous researches which focused on the inflow of the Western culture and its impact on Chinese culture. Firstly the evaluation and classification of the traditional novels are considered. Because the transition of the status of novels and the classification method of the catalog of books are tightly coupled with the change of academic ideologies. Later I tried to understand novels as a way of thinking the modern times with a discussion on the changes of modern knowledge society and the consideration of Liang Qichao's Revolution of the Novel World in the two viewpoints, i.e. the relationship between novels and political society, and novels and the style of writing. Liang Qichao raised novels to the topmost position of literature. He pushed the traditional poetry off the top position and replaced it with popular novels. As the outside impact of Western culture made Chinese novels a tool for enlightening the ignorant people and the medium of propagating the knowledge, the status of novels was elevated to the highest level which novels had never reached in the past. With the limitation that the valuation was not based on the aesthetic appreciation of art but based on the value for politics and society, novel was a discourse of life and death to save the country and a container of knowledge to rebuild the people's mind and convert the crisis of the national ruin.

• Clean Technology
• /
• v.27 no.3
• /
• pp.232-239
• /
• 2021

In order to develop a novel system named "thermal medium and gas circulation type pyrolysis system," this study was conducted to obtain basic data for process simulation before performing the pyrolysis experiment. Polypropylene (PP) was chosen as model material in the basic pyrolysis experiment instead of waste plastic and fluidized sand (hereinafter referred to as "sand"), and it was used as a heat transfer material in the "thermal medium and gas circulation type pyrolysis system." Ni was impregnated as an active catalyst on the sand to promote catalytic pyrolysis. The basic physical properties of PP were analyzed using a thermogravimetric analyzer, and pyrolysis was performed at 600 ℃ in an N₂ atmosphere to produce liquid oil. The distribution of the carbon number of the liquid oil generated through the catalytic pyrolysis reaction was analyzed using GC/MS. We investigated the effects of varying the pyrolysis space velocity and catalyst amount on the yield of liquid oil and the carbon number distribution of the liquid oil. Using Ni/sand, the yield of liquid oil was increased except with the pyrolysis condition of 10 wt% Ni/sand at a space velocity of 30,000 h^-1, and the composition of C₆ ~ C₁₂ hydrocarbons increased. With increases in the space velocity, higher yields of liquid oil were obtained, but the composition of C₆ ~ C₁₂ hydrocarbons was reduced. With 1 wt% Ni/sand, the oil yield obtained was greater than that obtained with 10 wt% Ni/sand. In summary, when 1 wt% Ni/sand was used at a space velocity of 10,000 h^-1, the oil yield was 60.99 wt% and the composition of C₆ ~ C₁₂ hydrocarbons was highest at 42.06 area%.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.541-549
• /
• 2020

The Drug Delivery System (DDS) is defined as a technology for designing existing or new drug formulations and optimizing drug treatment. DDS is designed to efficiently deliver drugs for the care of diseases, minimize the side effects of drug, and maximize drug efficacy. In this study, the optimization of tripolyphosphate (TPP) concentration on the size of Chitosan nanoparticles (CNPs) produced by crosslinking with chitosan was measured. In addition, the characteristics of Fe₃O₄-CNPs according to the amount of iron oxide (Fe₃O₄) were measured, and it was confirmed that the higher the amount of Fe₃O₄, the better the characteristics as a magnetic drug carrier were displayed. Through the ninhydrin reaction, a calibration curve was obtained according to the concentration of γ-aminobutyric acid (GABA) of Y = 0.00373exp(179.729X)-0.0114 (R² = 0.989) in the low concentration (0.004 to 0.02 wt%) and Y = 21.680X-0.290 (R² = 0.999) in the high concentration (0.02 to 0.1 wt%). Absorption was constant at about 62.5% above 0.04 g of initial GABA. In addition, the amount of GABA released from GABA-Fe₃O₄-CNPs over time was measured to confirm that drug release was terminated after about 24 hr. Finally, GABA-Fe₃O₄-CNPs performed under the optimal conditions were spherical particles of about 150 nm, and it was confirmed that the properties of the particles appear well, indicating that GABA-Fe₃O₄-CNPs were suitable as drug carriers.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.557-562
• /
• 1999

The reaction properties of Pd. Pd-Ce and Pd-La catalysts supported on ${\gamma}-Al_2O_3$ were investigated in the oxidation reaction of methane($CH_4$) exhausted from the compressed natural gas vehicle in a U-tube flow reactor with gas hourly space velocity of $72,000h^{-1}$. The catalysts were characterized by X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), BET surface area and hydrogen chemisorption. Pd catalyst prepared by $Pd(NO_3)_2$ as a palladium precursor and calcined at $600^{\circ}C$ showed the highest activity for a methane oxidation. Catalytic activity of calcined $Pd/{\gamma}-Al_2O_3$ in which most of palladium was converted into palladium oxide species was higher than that of reduced $Pd/{\gamma}-Al_2O_3$ in which most of palladium existed in palladium metal by XRD. As increasing the number of reaction cycles in the wide range of redox, the catalytic activity of $Pd/{\gamma}-Al_2O_3$ was decreased and the highly active window became narrower. Lanthanum oxide promoted Pd catalyst, $Pd/La/{\gamma}-Al_2O_3$ showed enhanced thermal stability compared with $Pd/{\gamma}-Al_2O_3$ even after aging at $1000^{\circ}C$, which was ascribed to the role of La as a promoter to suppress the sintering of palladium metal and ${\gamma}-Al_2O_3$ support. Almost all of methane was removed by the reaction with NO at the redox ratio of 1.2 in case of oxygen excluded steam, but that activity was significantly decreased in the steam containing oxygen.

• (The) Research of the performance art and culture
• /
• no.39
• /
• pp.669-700
• /
• 2019

Farmers' band music is a religious ritual in Korea. It is a solemn ritual to exhibit the auspicious holiness of the people to the God. Most of the ritual is accomplished by music. The music of the farmers 'band, in this sense, has its meaning as the expression of holiness by sound. In this paper, I will explore the principle to make various rhythms of farmers' band music, especially focusing on the chaegut (lit. "stroke music"). It is very symbolic because the name of the music shows the strokes of the gong, called jing, in a rhythmic phrase. In this sense, the chaegut is man-made music based on the specific principles in accordance with the strokes of the gong. Among many chaegut rhythms, samchae (lit. "three strokes") to chilchae (lit. "seven strokes") are the main rhythms. They were made after the principle of 'forward with drums, backward with gongs' in Five way procession. It the basic principle of military procession from the early Joseon Dynasty. The procession follows with the sound of the drums and gongs. There was always a principle of "five strokes" to control the procession. The "five strokes" became the basis of the making of chaegut rhythms. The rhythms of the samchae to chilchae are based on the rhythm of samchae. The samchae has three gong strokes in a cycle, which exhibits the chaotic moment with the rhythmic noise. The name of the rhythm exhibits the correspondence of the signifiant, that is the name "three strokes" and the signifié, that is the real three strokes of gongs in music. Other four rhythms has made up from the samchae with half cycles are added in accordance with the strokes of the gongs. In this way, the chaegut shows the principle of "five strokes" in the military procession. The rhythm of ochae jilgut is a mixture of ochae (lit. "five strokes") and jilgut (lit. "road music") which is usually performed on the road to a mountain shrine. The musical structure of ochae jilgut corresponds to the colotomic structure of Southeast Asian music and the 15th-century music of old musical scores. The rhythm of gilgunak chilchae is a mixture of gilgunak (lit. "road military music") and chilchae (lit. "seven strokes"). The rhythmic structure is similar to other regional music, sijo ("short song") of the literati music and norae garak (lit. "some melody") of the shaman music. In sum, the chaegut is very artistic music made from the military procession of the Joseon Dynasty. The name of the rhythm corresponds with the strokes of the gong in a cycle. In this way, the chaegut shows the principle of music-making to exhibit the ritual characteristics of the Korean people.