• Journal of the Mineralogical Society of Korea
• /
• v.8 no.2
• /
• pp.57-72
• /
• 1995

춘천 지역 선캠브리아기의 구봉산층군 내의 백운석질 대리암에는 광역변성작용의 산물로서 조립질의 투각섬석이 주된 규산염 광물상을 이루며 산출된다. 이들은 배태 층준과 원암의 조성에 따라 두 가지 유형으로 구분된다. : (1) 투각섬석(흑회색)+방해석+백운석+활석, (2)투각섬석(백색)+금운모+백운석+방해석+K-장석, 백색의 투각섬석이 흑회색형보다 상대적으로 높은 Al과 알칼리 함유도를 보이지만, 전반적으로 모두 Mg-단종에 가까운 화학 조성을 갖는다. 투각섬석들이 격자 구조상의 결함 구조를 갖지 않는데 비해서, 금운모는 1M 구조형을 이루고 저면 격자 간격상에 녹니석 단위의 빈번한 개재에 의한 격자상의 구조적 결함이 흔히 관찰된다.방해석-백운석 지온계에 대한 연구와 TWEEQU 프로그램을 이용한 상평형도 작성을 통해서, 투각섬석들은 500~$600^{\circ}C$의 온도 범위, 8kb 정도의 압력 및 Xco2=0.2~0.5 조건에서 생성된 것으로 해석하였다. 이 지역의 투각섬석은 위와 같은 조건에서 지속적으로 평형 상태가 유지되고 상안정도가 증대되므로서, (1) 투휘석을 수반하지 않고, (2) 격자 구조상의 결합을 갖지 않는, (3) 자형의 큰 결정을 이루게 된 것으로 해석된다.

• The Korean Journal of Quaternary Research
• /
• v.7 no.1
• /
• pp.93-101
• /
• 1993

A sedimentation study of the Cheonripo intertidal beach sands and its related coastal dune sands, Cheonripo, Seosan Gun, Choongcheong Namdo, Korea has been carried out based on a series of several summer time field surveys. Each subenvironment in the Cheonripo coastal zone, that is, intertidal sand beach and coastal sand dune, could be differenciated in terms of textural parameters. The coastal dune sands are finer than the intertidal beach sands in mean grain size, and the sorting of dune sands is relatively poorer than that of intertidal beach sands. However, the skewness of intertidal beach and dune sands is commonly positive. Such textural parameters are characteristically differentiated on scatter diagrams. A series of megaripple bedform observations for 6 tidal cycle periods(August 13, 14 and 15, 1990) are interpreted to find out migration pattern of bedforms and its related sand migration. Such migration natures are shown on the tables and figures.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.397-399
• /
• 2017

The HDB3 code, a type of line code, is a data coding method used for digital data transmission. It is used to remove the DC wander on the transmission line which occurs when the DC component data is transmitted continuously. The military tactical communication network uses HDB3 code for data transmission and develops equipment using commercial HDB3 Codec IC. Because it is operated for more than 10 years due to the characteristics of military equipment, if a failure occurs in the equipment, the equipment can not be repaired due to the discontinuance of the part, so that the entire equipment may not be used. In this paper, we implement the HDB3 Codec as a logic to solve this problem and verify that the performance is equivalent to that of commercial parts.

• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.815-824
• /
• 2008

Embedded system is applied in various fields and must equip system to respond market's requirement which is changing fast. Products that do not equip such fast construction system will have become sterilization. Construction system for Time-To-Market is reusability system or framework that have reused existent product and produce new product. Because embedded system is being based on hardware, amendment is not available easily, but can change system softly using segment of software. Therefore, in this paper, suggest meta-model of reusability framework that can change embedded software. Meta model of this paper suggests dynamic meta-model to design functional flow of reusability framework.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.617-624
• /
• 2020

Due to the rapid development of science technology and the main characteristics of the defense industry, such as long development period, design complexity, high possibility of discontinuing parts due to long life cycle, and small quantity production, it can cause increasing of the inflow possibility of counterfeit electronic parts and deteriorating the reliability of weapons systems. This paper presents the specific criteria for the identification of electronic parts to be verified for mass produced weapons systems after the development is completed, and the identification and verification methods for the inflow of counterfeit electronic components.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.2
• /
• pp.75-82
• /
• 2021

The 3D printing technology is one of the fourth industrial revolution technology that drives innovation in the manufacturing process, and should be applied to nuclear industry for various purposes according to the manufacturing trend change. In nuclear industry, it can be applied to manufacture obsolete items and new designed parts in advanced reactors or small modular reactors (SMRs), replacing the traditional manufacturing technologies. A gate valve body was manufactured, which was obsolete in nuclear power plant, using DED(Directed Energy Deposition) metal 3D printing technology after restoring design characteristics including 3D design drawing by reverse engineering. The 3D printed valve body was assembled with commercial parts such as seat-ring, disk, stem, and actuator for performance test. For the valve assembly, including 3D printed valve body, several tests were performed, including pressure test, end-loading test, and seismic test according to KEPIC MGG and KEPIC MFC. In the pressure test, hydraulic pressure of 391kgf/cm² was applied to 3D printed valve body, and no leak was detected. Also the 3D printed valve assembly was performed well in end-loading and seismic tests.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.3
• /
• pp.12-24
• /
• 2013

The cities of Joseon dynasty had weak structure against fire. Fires have resulted in damage on property and life. But they gave a chance to development various policies, planning tools, techniques and facilities for minimizing the damages of fire. This study aims to understand the progression of fire control policy in Joseon dynasty. Fire control policies can be divided into four categories ; fire prevention, prohibition of fire spreading, fire extinguishing and rescue system. The progression of fire control policies can be divided into three steps. In the first step, from Taejong to Moonjong, various policy, such as regal & administrative system, planning tools, fire control works & appliances have been built and executed. In the second step, from Danjong to Hyunjong, fire control work have taken the central place of fire control policy. In the third step, from Sookjong to Sunjong, development of fire control appliances have taken the central place of fire control policy.

• Journal of Digital Convergence
• /
• v.10 no.5
• /
• pp.125-133
• /
• 2012

To make maximum benefit through the R&D investment, various methods is presented to support cooperating company in managing product information which reaches to conceptual design, detail design, production and a service from planning phase of production. Recently, the induction of PLM (Product Lifecycle Management) is being accelerated to design the enterprising system which is various from the idea phase for a product plan to the elimination through the life cycle of the product by the major companies. This study is focused on the research and development of the major companies which is producing products like sets, parts and equipment. This study proposes the process of product strategy, goods planning, development, information and the renovation of decision-making system.

• Journal of Korea Game Society
• /
• v.16 no.5
• /
• pp.149-158
• /
• 2016

This research is about development and usability test of 'Paldokangsan4' which is a serious game for the elderly to improve their physical and mental health. This game is the next version of last 'Paldokangsan3' developed in 2013. Its motion capture interface 'Kinect' has been stopped for production that we have to develop the next version with 'Kinect2'. We added a personal ID system to accumulate palyers' game histories, and let the player know the the current score comparing to the personal average score every time. Also we added real mart background to the traditional old market background of the game as well as a tutorial level to learn how to play the game personally. In 2016 Play Expo, we have installed and demonstrated it and gathered opinions of 40 volunteers in questionnaire. The result of their analysis showed that we could find the possibility of beneficial effects for the elderly following the last version.

• The Journal of the Korea Contents Association
• /
• v.10 no.11
• /
• pp.251-261
• /
• 2010

The research examine countermeasures of community welfare center, total welfare service provider in the local, to establish of identity and revitalization in the rapidly changing social circumstances. It examine countermeasures of the community welfare center in institutional and practical environment of welfare environment. The community welfare center has to provide welfare service which is improvement the quality of life in local, to be as methodical casework facility and to solve the community matters throughout organized residents. Also, comparison with specific welfare center and similar welfare facilities, the community welfare center has to provide differentiation services from totally welfare services. Finally, in privatized and market economic welfare environment, the community welfare center has to have policy countermeasures strategies to survive in competition not only welfare service provider.