• Journal of the Korea Concrete Institute
• /
• v.26 no.2
• /
• pp.181-188
• /
• 2014

In this study, an interactive analysis considering column-pile interaction is performed on the basis of an equivalent base spring model for supplementing virtual fixed point design of bent pile structures. Through this analytical method, the application of the minimum steel reinforcement ratio of the pile (0.4%) is analyzed by taking into account the major influencing parameters. Furthermore, the limit depth for steel reinforcement ratio is proposed through the relationships between column and pile conditions. To obtain the detailed information, it is found that an interactive analysis is intermediate in theoretical accuracy between the virtual fixed point model analysis and full-modeling analysis. Base on this study, it is also found that the maximum bending moment is located within cracking moment of the pile when material nonlinearity is considered. Therefore, the minimum steel reinforcement ratio is appropriately applicable for the optimal design of bent pile structures. Finally, the limit depth for steel reinforcement ratio ($L_{As=x%}$) is proposed by considering the field measured results. It is shown that the normalized limit depth ratio for steel reinforcement ratio ($L_{As=x%}/L_P$) decreases linearly as the length-diameter ratio of pile ($L_P/D_P$) increases, and then converges at a constant value.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.3
• /
• pp.197-212
• /
• 1990

This paper present a new design concept of a single chip 16-bit data path using the concept of modular design, the whole system is divided into several blocks which can be operated as an independent system itself. Making the internal blocks can act as a subsystem, it is possible to shorten design turn-around time, to be redesigned effectively, and to optimize the system performance. The designed system is data path. The data path is to manipulate 16-bit integer data. It is composed of aritmetic logic unit, register file, barrel shifter and bus circuit. The widths and lengths of gate in the circuit were determined using SPICE2. The results of circuit simulation were in good agreement with expected circuit characteristics.

• The Journal of Korean Academy of Sensory Integration
• /
• v.21 no.3
• /
• pp.54-64
• /
• 2023

Objective : This study aims to ascertain the effect of oral activity and sensory integration therapy on drool and play using oral toys in children with developmental delays. Methods : The participants of the study were two children (2 years and 8 months) experiencing developmental delays with sensory modulation problems in their oral sensory faculties. The research design was multi-baseline design cross-subjects among single-subject research ABA. Target behaviors were measured by drooling and interest and concentration in play using oral toys through the Goal Attachment Scale (GAS). In the 10 sessions that the children underwent during the intervention period (B), oral activity and proprioception-vestibular sensory integration therapy were applied. Results : The GAS of drooling improved from 0.25 for child A and -0.5 for child B during the baseline to 1.88 for child A and 1.4 for child B during the intervention period. The follow-up was 3 for both child A and child B. Meanwhile, the GAS of play during the baseline was -0.75 for child A and 0.75 for child B, and 1.9 for child A and 1.1 for child B during the intervention period. The follow-up was 1.33 for child A and 2 for child B. Conclusion : Oral activity and proprioceptive-vestibular sensory integration therapy are effective in drooling and playing with oral toys in children with sensory modulation problems in their oral sensory faculties.

• 전자공학회논문지 IE
• /
• v.49 no.2
• /
• pp.18-23
• /
• 2012

A method to determine the equivalent circuits of broadband ultrasound transducers is necessary for designing filters that match the impedances of the transducer and the analysis of the transducer. A method is proposed to determine the equivalent circuits of broadband transducers with 2 resonances in the frequency band of interest. The circuit parameters are estimated by iterative Levy method with the measured electrical conductance data. The method is illustrated by computing the conductance and susceptance of the equivalent circuits of 3 types of broadband transducers. The equivalent circuit of a transducer.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.357-358
• /
• 2014

본 논문에서는 태양광 모듈의 최대 전력점을 추종하기 위한 제어 기법으로 부스트 컨버터(boost converter)의 불연속 전류모드(Discontinuous Current Mode)에서 주파수를 제어하는 기법을 구현 하였다. 태양광 모듈에 연결된 부스트 컨버터는 전압루프를 통하여 Perturb and Observation(P&O)기법을 사용하여 최대 전력점을 추종하였다. 부스트 컨버터의 인덕터에 흐르는 전류는 불연속 전류모드로 제어 된다. 불연속 전류모드에서의 제어기 설계는 MATLAB과 PSIM의 전달함수특성을 수학적 모델링을 통하여 비교 검증 하였으며, 모든제어는 MCU(TEXAS INSTRUMENTS사의 DSPF28335)를 통해 디지털로 제어 하였다. 제안된 기법은 단일 PV모듈이 연결된 불연속전류모드 부스트 컨버터를 통해 동작특성을 분석하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.3
• /
• pp.228-235
• /
• 2010

This paper deals with an autonomous flight controller design problem for a tilt-rotor aircraft in rotary-wing mode. The inner-loop algorithm is designed using the output-based approximate feedback linearization. The model error originated from the feedback linearization is cancelled within allowable tolerance by using single-hidden-layer neural network. According to Lyapunov direct stability theory, the adaptive update law is derived to run the neural network on-line, which is based on the linear observer dynamics. Moreover, the outer-loop algorithm is designed to track the trajectory generated from way-point guidance. Especially, heading and flight-path angle line-of-sight guidance are applied to the outer-loop to improve accuracy of the landing tracking performance. The 6-DOF nonlinear simulation shows that the overall performance of the flight control algorithm is satisfactory even though the collective input response shows instantaneous actuator saturation for a short time due to the lack of the neural network and the saturation protection logic in that loop.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1612-1627
• /
• 1994

There is a synchronization function which deals with only single media of text in the OSI Session Layer. So new synchronization schem and synchronization protocol are required for multimedia communications which include audio, video and graphic as well as text information. In this paper, conceptional Multmedia Synchronization Layer(MS layer) environment is composed and its service primitives and protocols based on 'multi-channel, base media scheme' are designed and proposed for multimedia synchronization services. This MS layer Manager (MSM) establishes the MS layer connection to the peer MS layer and manages each media channel which is created in MS layer media by media. The MSM also finds the synch-position through the media frame number by utilizing it like the time stamp to provide inter-media synchronization services as well as intra-media synchronization services.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.157-160
• /
• 2009

멀티 피직스 시스템은 구동을 수치적으로 해석하기 위하여 두 개 이상의 연성이 되어 있는 물리계를 고려해야하는 시스템을 일컫는다. 대표적인 예로 기계 분야에서 현재까지 많이 연구되어 왔던 열탄성(Thermal/Structure)과 유체/구조 연성(Fluid/Structure)시스템을 들 수 있다. 또한 현재 차세대 성장산업으로 많은 관심이 집중되고 있는 의료기기나 지능형 자동차와 로봇 등에서 사용되는 다양한 센서와 엑추에이터 등도 특별한 예로 들 수 있다. 특히, 한 개의 물리계 해석으로 시스템 해석이 가능한 기존의 일반적인 기계 시스템과는 달리 MEMS 등의 초소형 시스템은 시스템의 거동을 수치적으로 계산하기 위하여 여러 물리계의 연성을 고려해야 한다는 점에서 대표적인 다물리계 시스템의 예로 들 수 있다. 이렇게 우리생활에 밀접하게 쓰이고 있는 멀티 피직스 시스템은 단일 물리계 시스템과 비교하여 엔지니어의 경험에 의존하여 설계(Design)하기가 어려운 특성이 있다. 이에 이 연구 논문에서는 이런 멀티 피직스 시스템을 해석하고 최적화 하기위한 노력을 소개한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.163-165
• /
• 2018

GF(p)상 타원곡선 암호(ECC)와 RSA를 단일 하드웨어로 통합하여 구현한 공개키 암호 프로세서를 설계하였다. 설계된 EC-RSA 공개키 암호 프로세서는 NIST 표준에 정의된 소수체 상의 224-비트 타원 곡선 P-224와 2048-비트 키 길이의 RSA를 지원한다. ECC와 RSA가 갖는 연산의 공통점을 기반으로 워드기반 몽고메리 곱셈기와 메모리 블록을 효율적으로 결합하여 최적화된 데이터 패스 구조를 적용하였다. EC-RSA 공개키 암호 프로세서는 Modelsim을 이용한 기능검증을 통하여 정상동작을 확인하였으며, $0.18{\mu}m$ CMOS 셀 라이브러리로 합성한 결과 11,779 GEs와 14-Kbit RAM의 경량 하드웨어로 구현되었다. EC-RSA 공개키 암호 프로세서는 최대 동작주파수 133 MHz이며, ECC 연산에는 867,746 클록주기가 소요되며, RSA 복호화 연산에는 26,149,013 클록주기가 소요된다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11b
• /
• pp.897-900
• /
• 2002

인터넷은 공개된 네트워크이므로 사용자에게 편리성을 제공하지만 정보통신 시스템의 보호취약점이 심각하게 노출되기 시작하면서 보호의 필요성에 대한 인식이 높아지고 있어 정보보호 산업은 정보산업과 전반적인 발전뿐만 아니라 국가전략차원에서도 가장 중요한 요소의 하나로 부각되고 있다. 본 논문에서는 기밀성 제공 측면에서 가장 널리 쓰이는 블록 암호 알고리즘의 국내 표준인 SEED와 차세대 암호 알고리즘으로 미연방 표준인 AES Rijndael을 단일칩으로 통합 구현하였다. 두 알고리즘 모두 라운드 변환을 반복 처리하는 구조를 채택하였으며, 자원을 최대한 공유할 수 있도록 설계하였다. 설계된 암호 프로세서는 Xilinx XCV-1000E FPGA로 구현, 테스트 보드 상에서 기능을 검증하였다.