• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.6
• /
• pp.347-354
• /
• 2009

Experimental study on a cross-flow air-cooled plate heat exchanger (PHE) was performed. Two types of PHEs were manufactured either with single-wave plates or with double-wave plates in parallel. Cooling air flows through the PHEs in a crosswise direction against internal hot water. The heat exchanger aims to substitute open-loop cooling towers with closed-loop water circulation, which guarantees cleanliness and compactness. In this study, prototype single-wave and double-wave PHEs were designed and tested in a laboratory scale experiments. From the tests, the double-wave PHE shows approximately 50% enhanced heat transfer performance compared to the single-wave PHE. However, the double-wave PHE costs 30% additional pressure drop. For the commercialization, a wide channel design for air flow would be essential for performance and reliability.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.2
• /
• pp.190-200
• /
• 2021

Purpose. The aim of this study was to evaluate biaxial flexural strength and hardness of colored monolithic zirconia after dipping in different time intervals of coloring solution. Materials and Methods. Disk shaped specimens were prepared from monolithic zirconia (Eclipse V2.0, AMS, Gimpo, Korea). Four experimental groups were categorized (n = 12) due to coloring time (PU (0s); ST (8s); OV (1 min); PS (preshade)), to evaluate biaxial flexural strength and Vickers hardness. After fracture, X-ray diffraction analysis was performed using fractured specimens. Results were analyzed with one-way ANOVA test. Results. There was no significant difference between groups in the biaxial flexural strength test. However, in the Vickers hardness test, the group with standard dipping time (ST) showed significantly higher value than the group without dipping in coloring liquid (PU)(P=.038). Also, there was no significant difference in the rest of the groups (P>.05). As a result of X-ray diffraction analysis, specific peaks of tetragonal phase were shown and the volume of monoclinic phase fraction was lower than 25%. Conclusion. Although this study has several limitations, coloring liquids had no significant effect on biaxial flexural strength. Vickers hardness was significantly different between the group to which the coloring liquid was applied and the group to which the coloring solution was not applied, but there was no significant difference between the other groups. Also, the flexural strength of monolithic zirconia corresponds to Class 5 of the minimal flexural strength standard according to the use of dental ceramics.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.3
• /
• pp.288-298
• /
• 2001

There has been a growing interest in thick composite materials especially for primary structures. Fiber waviness is one of the manufacturing defects frequently encountered in thick composite structures and affects the mechanical properties such as stiffness and strength significantly. Therefore, nondestructive evaluation technique that can detect fiber waviness of thick composite is very important for the integrity of structures. In this study, efforts were made to understand ultrasonic wave propagation in thick composites with uniform fiber waviness by adopting the ray and plane wave theories. Both theoretical and experimental investigations were conducted to understand the wave propagation in thick composites with uniform fiber waviness. The experiments were conducted on specially fabricated thick composite specimens with various degrees of uniform fiber waviness using the conventional through-transmission method to verify the predicted results. The experimental results showed good agreement with the theoretical predictions.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.1
• /
• pp.5-14
• /
• 2009

This study is to analyze numerically the spatial behaviors of the solute transport in a spatially correlated variable-aperture fracture under the effective normal stress conditions. Numerical results show that the solute transport in a fracture is strongly affected by the spatial correlation length of apertures and applied effective normal stress. According to increasing spatial correlation length, the mean residence time of solute is decreased and the tortuosity and Peclet number (is a dimensionless number relating the rate of advection of a flow to its rate of diffusion) is also decreased. These results mean that the geometry of the aperture distribution is favorable to the solute transport as the spatial correlation length is increased. However, according to the applied effective normal stress is increased, the mean residence time and tortuosity have a tendency to increase but the Peclet number is decreased. The main reason that the Peclet number is decreased, is that the solute is displaced by one or two channels with relatively higher local flow rate due to the increment of contact areas by increasing effective normal stress. Moreover, based on numerical results of the solute transport in this study, the exponential-type correlation formulae between the mean residence time and the effective normal stress are proposed.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.235-240
• /
• 2007

Performance of an air-cooled plate heat exchanger (PHE) was evaluated in this study. The PHE was manufactured in two types of single-wave and double-wave plates in parallel assembly. The heat exchanger aims to substitute open-loop cooling towers with closed-loop water circulation, which guarantees cleanliness and compactness. In this study, prototype single-wave and double-wave PHEs were designed and tested in a laboratory scale experiments. From the tests, the double-wave PHE shows approximately 50% enhanced heat transfer performance compared to the single-wave PHE. However, the double-wave PHE costs 30% additional pressure drop. For the commercialization, a wide channel design for air flow would be essential for performance and reliability.

• 기계와재료
• /
• v.22 no.1
• /
• pp.30-35
• /
• 2010

전자부품산업이 빠르게 발전하고 있기 때문에 고기능성 PCB의 수요 또한 많이 늘고 있다. 이러한 PCB는 전자제품의 굴곡성(flexibility) 있는 형태로 발전하여 전자제품의 소형화 및 고밀도화가 가능하고, 반복적인 굴곡에 높은 내구성을 갖는 연성(flexible) PCB(FPCB)의 사용이 증가하고 있으며, 이런 시장의 요구에 맞춰 연성 다층 구조의 FPCB에 대한 정밀 고속 가공 기술에 대한 수요도 급격히 확대되고 있다. 따라서 장비 운영의 효율성 극대화 및 설비 투자를 최소화하고 단일 장비로 절단(half cut, full cut), 제거, 트리밍, 리페어 고정 등을 수행할 수 있는 장비 개발을 위한 스캐너/스테이지 고정밀 제어, Z축 스텝가공, 멀티포인트 비전 인식을 통한 왜곡 최소화 등의 요소기술 개발관련 내용을 소개하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.719-722
• /
• 2000

단일 카메라로 회전하는 물체의 영상을 획득한 후, 그 영상을 분석하여 3차원으로 복구하는 새로운 알고리즘을 제안한다. 제안하는 알고리즘은 물체의 회전과 단 하나의 카메라를 이용하는 방법이기에 기존의 스테레오 영상을 이용하는 방법에 비해 차이를 둘 수 있다. 회전하는 물체에는 회전축과 동일한 방향의 스캔라인을 형성시키고, 이 스캔라인을 적절한 측면에서 하나의 카메라를 이용해 영상으로 획득하여 스캔라인의 굴곡과 이 스캔라인에 인접한 화소의 컬러 정보를 이용하여 3차원의 물체를 재건한다. 이 방법은 3차원의 정보를 얻음에 있어 물체의 회전에 의존하기에 한 방향에서 얻어진 두 스테레오 영상의 정합과 각 방향에서 얻어진 영상을 정합 시킬 때 발생될 수 있는 스테레오 비전의 오류를 피할 수 있다.

• The Journal of the Korean dental association
• /
• v.58 no.7
• /
• pp.435-442
• /
• 2020

Porcelain is the first ceramic material to be introduced into dentistry. Porcelain jacket crown was introduced by Dr. Charles H Land in 1886, which was an excellent aesthetic dental restoration but has not been widely used due to high firing shrinkage and low tensile strength. Then metal-ceramic system, which combines the esthetic properties of ceramics and the mechanical properties of metals, was introduced and nowadays it is still used in dental clinical field. However, the metal-ceramic system has shown some problems, such as increased lightness by reflection of light at opaque layer, shadow beneath the gingival line due to the block-out of light by metal coping, exposure of metal in margin part, bond failure between metal and porcelain, oxidation of metal coping during firing the porcelain, etc. Recently, along with the advance of fabrication methods of dental ceramics, the all-ceramic restorations with high esthetic and mechanical properties has increased and gradually replaced metal-ceramic restorations. Especially, CAD/CAM technology has opened a new era in fabricating the dental ceramic restorations. This overview will take a look at the past, present and future possibility of the dental ceramic materials.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.1-8
• /
• 2008

The lateral strength test of bending type was done to investigate the lateral capacity of the double bolt connection of domestic larix glulam according to bolt spacing. In the shear specimen, which is bolted connection in the inserted plate type, the hole of bolt was made, changing the diameter of bolt (12 mm and 16 mm), the number of bolt (single bolt : control and double bolt), the direction of bolt row (in parallel to grain : Type-A and in perpendicular to grain : Type-B) and the bolt spacing (Type-A : 4 d and 7 d and Type-B : 3 d and 5 d). Lateral capacity and failure mode of bolt connection were compared according to conditions. In prototype design (KBCS, 2000), the reduction factor of the allowable shear resistance that the bolt spacing is reduced was calculated. The results were as follows. 1) Bearing stress per bolt in the single and double bolt connection of Type-A was directly proportional to bolt diameter and bolt spacing. Bearing stress of Type-B decreased as bolt diameter was increased, and decreased by 2~10% when bolt diameter was increased. 2) In the single bolt connection and the double bolt connection of Type-A, the splitted failure was formed in the edge direction. When the bolt spacing was 3 d in Type-B, bolt was yielded more in the part of tension than in the part of compression, and the splitted failure started at the bolt in the part of tension. In the 5 d spacing specimen, the bolt in the part of tension was yielded similarly to bolt in the part of compression, and the splitted failure started in the part of compression. 3) In the prototype design, the reduction factor was calculated by non-dimensionizing the yielding load in the standard of bolt spacing (Type A : 7 d and Type B : 5 d). In 12 mm bolt connection, the reduction factor of bolt spacing 4 d (type-A) and single bolt connection was 0.87 and 0.55, respectively, and the reduction factor of bolt spacing 3 d (Type-B) and single bolt connection was 0.91 and 0.55, respectively. In 16 mm bolt connection, the reduction factor of bolt spacing 4 d (type-A) and single bolt connection was 0.96 and 0.76, respectively, and the reduction factor of bolt spacing 3 d (Type-B) and single bolt connection was 0.91 and 0.77, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.128.1-128.1
• /
• 2014

잠자리, 벌 등 곤충과 새우, 가재 등 갑각류를 포함하는 절지동물류에서 발견되는 겹눈(compound eye)구조는 볼록한 형태이기 때문에 일반 단일렌즈(single lens)형 눈에 비해 매우 넓은 시야각을 가지며, 깊은 심도를 갖는 특징이 있다. 기존 카메라가 갖기 어려운 겹눈의 독특한 장점으로 인해, 곤충의 눈을 모방하는 연구는 많은 사람들의 주목을 받고 있다. 겹눈구조는 일반적으로 수백에서 수만개의 홑눈(ommatidium)이 모여 다발을 이루고 있으며, 각 홑눈은 겉에서부터 마이크로렌즈 형태의 각막, 수정추, 감간(rhabdom)형태로 이루어져 있다. 따라서 이러한 겹눈구조를 모방하기 위해서는 인공홑눈을 제작하고 이를 반구형으로 배열하는 것이 필수적이다. 그러나 실리콘 반도체를 기반으로 하는 이미지 센서는 딱딱하고 편평하여 굴곡진 형태로 배열이 어렵기 때문에 곤충눈을 모방한 형태의 구조물은 몇몇 연구그룹에서 개발된 사례가 있으나, 이미징이 가능한 곤충눈 시스템의 개발은 보고된 바가 없었다. 본 발표에서는 최근에 연구가 진행되고 있는 플렉서블 전자소자에 기반한 곤충눈을 모방한 이미징 시스템에 대해서 다루고자 한다.