• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.352-356
• /
• 2006

This study aims to analyze the current status and characteristics of apartment house unit plans towards spatial differentiation. The 172 house units from 32 housing complexes were selected for this analysis. In this study, factors of residential space plan especially in an apartment house are categorized into general characteristics on floor plan and factors for spatial floor plan. The Primary findings are as follows: (1) General characteristics on floor plan are analyzed based on space organization, area and number of bays. Among apartment houses over 40 pyeong, it seems that differentiation is well applied with various space plans available. (2) A result of an analysis on the factors for spatial floor plan shows that planning a living room with two-open-sides seems to be more common in the tower-shaped apartment blocks which are now on the increase. Moreover, many of them are adopting movable partitions to reflect resident's various demands on space plan. Among all, the extra kitchen in the balcony is planned high portion of 80.4%. And diningroom is positioned on the front side of the residential space along with a livingroom(19.2%). More frequently, dining area tends to face the living room(30.2%) according to the result. Besides dress rooms begin to be placed in each of the bedroom, once planned in one bedroom only while 18.6% of the apartment houses are placing new storages in the entrance to solve lack of storage space due to balcony extension.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1180-1183
• /
• 2011

In this paper, we present a design of AEM radome with frequency selective surface using unit-cell EM simulation method and verified the performance of AEM radome by the radiation pattern measurements of $16{\times}16$ array-antenna. Measured results under near-field condition showed a good agreement with the simulation and far-field measured ones. And there were no radiation pattern variation between antenna only and antenna with AEM radome. From these results, we verified that AEM radome with frequency selective surface can be a solution to reduce the RCS of conventional mast and radar.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.2
• /
• pp.156-164
• /
• 1998

The operation regions of a three-phase(3Ø) voltage-source(VS) PWM converter are classified in the current vector plane of the synchronous reference frame and their characteristics are explained. In the the power-factor decreasing region, the current control with unity power-factor can not give satisfactory performance to the given load because of the distortion of input current and the ripples and the steady-state errors in DC link voltage. In this paper, the derivation of the optimal current vector is proposed to solve these problems. With this, the input current can be controlled sinusoidally with available maximum power factor and the DC link voltage be the given load, resulting the expansion of the operation region of the 3Ø VS PWM converter. The validity of the proposed control method is proved by the experimental results.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.4
• /
• pp.85-96
• /
• 2003

The Geocell system is the advanced system of Geo-grids, and is one of geosynthetics used for earth reinforcement of weak soil. It is the way to increase earth strength and bearing capacity by using three dimension type of geo-composite. This paper analyzed the bearing capacity mechanism of Geocell system for earth reinforcement. Plate loading tests under the model laboratory condition were performed, and the increase of bearing capacity and the decrease of settlement with shallow foundation were evaluated.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.112-118
• /
• 2002

The adaptive m filters is more effective than m filters when acoustic feedback exists, in which cause an order of a FIR filter must be very large if some of poles of the ideal control filter are near the unit circle. But the IIR filters may have stability problems especially when the adaptive algorithm is not converged. In this paper, a stabilizing procedure for adaptive IIR filters is proposed. In the beginning of the ANC system, it improve a stability by pulling the poles of the IIR filter to the center of the unit circle, and it returns the poles to their original positions after the filter converge. Computer simulations and experiments are performed to show the effectiveness of proposed schemes.

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.5
• /
• pp.78-85
• /
• 1989

This paper describes a statistical methods and perception test for extracting the parameters to be used for the synthesis-by-rule of Korean plosives. Formant synthesizer is chosen for the synthesis of the phonemes. Speech materials for the analysis consists of 72 CV monosyllables from the single male speaker. The analysis is done mainly focused on the variation of parameters in time and frequency domain, then perception tests are executed to estimate the effects of variations of the formant transitions.

• Korean Institute of Interior Design Journal
• /
• no.12
• /
• pp.50-56
• /
• 1997

In the past thirty years, apartment house has been greatly developed and the housing supply has improved some degree. However, the fact is that interior space planning of apartment house still has a lot of problems. The purpose of this study is to research the change of interior room. The 160 examples of unit floor plan(40-85m2 i.e. 12.1py-25.7py) were selected and classified according to master bedroom type and living room area when was constructed by the city of Seoul and KNHC from 1970 to 1990. And then, the change of each area, size and ratio were analyzed and researched. The result of this research can be summarized as follows: 1. Size of unit floor plan was on the increase from 16.02py to 17.86py. 2. 2 bedroom type, master bedroom showed a rise of size and occupancy ratio. Living room grew larger than 1982-1991 for size and occupancy ratio. 3. 3 bedroom type, master bedroom was increased in size and occupancy ratio was reduced to 19.99%. Size of living room became broader than master bedroom and occupancy ratio(1972-1981) increased over 1982-1991. Through this analysis and research, this study is to provide the basic data for actural design process and to suggest future trend of apartment house.

• Journal of KIISE:Software and Applications
• /
• v.36 no.11
• /
• pp.947-954
• /
• 2009

This paper proposes a novel method that reconstructs a surfel-based object by using visual hull from multiple images. The surfel is a point primitive that effectively approximates point-set surface. We create the surfel representation of an object from images by combining the LDC(Layered Depth Cube) surfel sampling with the concept of visual hull that represents the approximated shape from input images. Because the surfel representation requires relatively smaller memory resources than the polygonal one and its LDC resolution is freely changed, we can control the reconstruction quality of the target object and acquire the maximal quality on the given memory resource.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.2
• /
• pp.50-58
• /
• 1992

To improve the quality of dwelling environment of domestic apartment house, it is required to establish the sound insulation standard and the performance evaluation method which is suitable to the domestic residential conditions. In this study, the properties of internal noisy sources of a single unit in apartment houses and the sound insulation performance of party walls are investigated and analyzed, as a primary step to the establishment of sound insulation standard. Based on these data, the differences in sound insulation index of each plane type are investigated along with their causes. Also, the factor which affect and decide the insulation performance are analyzed in an effort to improve the performance of party wall structures.

• Journal of Digital Contents Society
• /
• v.13 no.4
• /
• pp.483-490
• /
• 2012

The evaluation procedure of friendly-environment Preliminary certification is traditionally done by hand. It takes much time and a lot of manpower. Sometimes it is subject to the evaluator's experience. The solution to these problems is to systematize the evaluation procedure. The system can provide an objective standard for evaluation. It can develop more reliable standard, prevent errors, and save time. Therefore, this research suggests the evaluation system using the architectural information based BIM. To do this, the current study examines the possibility of evaluation system of friendly-environment Preliminary certification.