• Survey Research
• /
• v.1 no.2
• /
• pp.117-135
• /
• 2000

The corporate restructuring following the economic crisis in Korea has brought about fundamental changes in the structure and practice of employment relations. However the lack of information on processes and consequences of such changes hider the appropriate policy making on shopfloor industrial relations. Correct assessment of realities and effective policy making require information on human resource management practices and structure of employment relations at the workplace level. This paper critically examines the experiences of workplace-employee integrated surveys carried out in advanced countries including Australia, Canada, and Britain, to extract methodological implications for such survey in Korea. We focus on the backgrounds of the surveys and practical issues involved in multi-level, longitudinal survey design.

• Electronics and Telecommunications Trends
• /
• v.6 no.2
• /
• pp.3-14
• /
• 1991

최근의 생산자동화 분야에는 제품의 다양화, 라이프사이클의 단기화 등의 요구에 대응하기 위하여 유연성, 확장성, 보수성이 높은 공정 적용시스팀의 실현요구가 높아지고 있다. 이 요구에 대응하기 위하여 조립, 검사 등의 공정라인에서는 프로그램이 가능한 PLC, 로보트 등의 단위제어기기를 조합하여 작업스테이션을 구성하고 이들을 반송차 등으로 연결하여 운영하는 사례가 늘어나고 있다. 이러한 자동화의 실현을 가능하게 하기 위하여 대상공정의 단위 제어기기에 따라 라인 운용의 변경 등에 유연하게 대응하고 또한 재기동 조정, 이상처리 등의 지원기능을 보유하기 위한 공정구축의 해석과 제어시스팀의 운용기법이 연구되고 있다. 본고에서는 이러한 생산라인에서의 단위제어기기의 새로운 요구와 공정의 해석을 위하여 C-net와 Grafcet기법과 이의 활용사례를 소개한다.

• Korean Journal of Remote Sensing
• /
• v.24 no.6
• /
• pp.641-644
• /
• 2008

In order to improve a camera rotation calculation based on the bundle adjustment in Chon's camera motion (Chon and Shankar, 2007, 2008), this paper introduces a method calculating the camera rotation. It estimates a unit vector in the optical axis of a camera through the angles between the optical axis and vectors passing a camera position and ground control points (GCP). The camera position is estimated by using the inner product method proposed by Chon. The horizontal and vertical unit vectors of the camera are determined by using Yakimovsky and Cunningham's camera model (CAHV) (1978).

• Annual Conference on Human and Language Technology
• /
• 2020.10a
• /
• pp.473-476
• /
• 2020

개체명 인식에 적용된 대부분의 신경망 모델들에서 CRFs와 결합을 통해 성능 향상을 하였다. 그러나 최근 대용량 데이터로 사전 학습한 모델을 활용하는 경우, 기 학습된 많은 유의미한 파라미터들로 인해 CRFs의 영향력이 비교적 작아졌다. 따라서 본 논문에서는 한국어 대용량 말뭉치로 사전 학습한 ELECTRA 모델에서의 CRFs 가 개체명 인식에 미치는 영향을 확인해보고자 한다. 모델의 입력 단위로 음절 단위와 Wordpiece 단위로 사전 학습된 두 가지의 모델을 사용하여 미세 조정을 통해 개체명 인식을 학습하였다. 실험을 통해서 두 모델에 대하여 각각 CRFs 층의 유무에 따른 성능을 비교해 보았다. 그 결과로 ELECTRA 기반으로 사전 학습된 모델에서 CRFs를 통한 F1-점수 향상을 보였다.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.282-290
• /
• 2013

In this study, the adjustment range of mixture factor with replacement mineral admixture was reviewed to secure the mixture change data of high volume concrete compared to general concrete. When changing the concrete mix to high volume concrete within the universal concrete mixing, the adjustment range of mixture to ensure optimum quality is as follows. Unit-water content is $20{\sim}30kg/m^3$ downward. Fine aggregate ratio dropped by approximately 1% when W/B was reduced by 5%, and it is reduced by approximately 0.12% when there is a 5% increase in the total replacement rate. When the FA replacement rate was increased by 5%, the AE agent was approximately 20% to 30% higher compared with the conventional one. When the FA and BS replacement rate rose by 5%, W/B was reduced by about 1 to 4%.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.91-98
• /
• 1989

The analysis of a single stereo model is not sufficient in applying for some large structures, therefore the precise coordinate analysis photogrammetric block adjustment method should be considered. The distribution of control points has a great influence on the error characteristics of the block adjustment results. Thus, the unit model method is applied to the photogrammentric adjustment procedure to study error characterestics with different distributions of control points. Through this study, the second order polynomial equations about bridging distance and plane error are developed in block adjustment of terrestrial photogrammetry. Comparing the block adjustment method and a single model method, root mean square error of the block adjustment method is 0.44mm, and a single model method is 1.06mm.

• Journal of IKEEE
• /
• v.6 no.1 s.10
• /
• pp.21-29
• /
• 2002

This paper describes a high resolution DLL(Delay Locked Loop) using all digital circuits. The proposed architecture is based on the three stage of coarse, fine and ultra fine phase tuning block which has a phase detector, selection block and delay line respectively. The first stage, the ultra fine phase tuning block, is tune to accomplish high resolution using a vernier delay line. The second and third stage, the coarse and fine tuning block, are tuning the phase margin of Unit Delay using the delay line and are similar to each other. It was simulated in 0.35um CMOS technology under 3.3V supply using HSPICE simulator. The simulation result shows the phase resolution can be down to lops with the operating range of 250MHz to 800MHz.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.465-468
• /
• 2008

This study investigated the best condition when mixed sand with a river and crushed sand was used though the experiment for the properties of the concrete corresponding to the control of fine aggregate ratio to apply the mixed sand and properties of the fine aggregate at the ready-mixed concrete factory on Yeongnam and Honam. The physical properties of Yeongnam and Honam is satisfied with KS F 2526 and KS F 2527 except fineness modulus and passing amount of 8mm sieve. And, the mixed sand above two types which were incongruent to use individually was being used at each factory, and it was managed in accordance with KS. The flowabillity of the mixture proportion of concrete which was estimated by method of unit volume weight according to the fine aggregate ratio at each factory on Yeongnam and Honam was higher than existing mixture proportion. It was analyzed that the residual water due to decline of the surface area caused by reducing fine aggregate ratio was increased relatively. Accordingly, it was considered that the effect on the economic mixture proportion and improvement of durability might be possible.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.50-60
• /
• 2014

The purpose of this study is to identify characteristics and improvements of the climate change vulnerability analysis methods to build a safe city from disasters. For this, an empirical analysis on sea level rise disasters was performed focusing on Heaundae-gu in Busan. For the analysis, Census output areas and Dongs were set as analysis unit and their disaster vulnerability was analyzed. Improvements were reviewed through the comparison and review of analysis process and results. According to analysis results, Modifiable Areal Unit Problem(MAUP) which gives different results according to aggregate unit occurs. Improvements were induced by analysis process, and it was found that in spatial unit setting stage that becomes the base of analysis, analysis unit adjustment, score computation method adjustment, and clearer analysis method for each disaster type would be needed. In analysis execution stage, it was thought that weighting according to variables, diversification of variables, and exclusion of subjective analysis selection method would be needed. It is expected that accurate the total disaster vulnerability analysis will be the base for the improvement of efficiency in urban resilience responding to future weather changes.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.1
• /
• pp.106-110
• /
• 2008

The requirement for customized learning environments is increasing with the development of Web 2.0 technology To personalize services in E-learning, there are various functions available to the user. However, some components have fixed or inflexible functionality that limits what can be changed, and customization information has not been used for other purposes. In this paper, we propose an e-Space manager for the dynamic customization of learning environment control units. The proposed method can confirm which areas users have customized and how they have customized them. The advantage is that users can control their own learning environments, including not only the format, but also the content within the limits of the underlying system. The customization information is captured to confirm the competency model.