• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.74-82
• /
• 2017

Fires in buildings built using sandwich panels are difficult to extinguish, and the damage caused by the fire spreading through the inner core material is extensive. Sandwich panels consist of a nonflammable material on both sides of an insulation material. The types of insulation material include organic and inorganic insulation materials, but the former are used in more than 80% of the case. Organic insulation is economically advantageous compared to inorganic insulation, but it is vulnerable to fire. Therefore, the damage caused by sandwich panel fires is higher than that for general fires. In the case of the noxious gas analyzer test, the panel is tested with three round holes having a diameter of 25 mm, in order to determine the risk of the core material, but the cone calorimeter test is carried out using a sandwich panel. In this study, the cone calorimeter test was conducted to examine the fire risk of the composite material when heated on a nonflammable surface, exposed to the core material through a hole, and heated directly the core material. The type of organic insulation employed was flame retardant EPS (Expanded Polystyrene), and the test specimens were tested in three types of sandwich panel, a perforated sandwich panel and single core material. The purpose of this study is to propose a method of measuring the fire risk of the core materials of composite materials using the cone calorimeter test.

• Journal of Conservation Science
• /
• v.38 no.2
• /
• pp.109-116
• /
• 2022

This study identified Korean red pine (Pinus densiflora) and exotic pines (Pinus resinosa, Pinus sylvestris) with a similar anatomical structure using a dendro-anatomical method that applied dendrochronology, tracheid length, and uniseriate ray cell size. Korean red pine samples were collected from 13 national parks, while exotic pine samples were secured from two wood importers. Tracheid length was measured by distinguishing earlywood from latewood, and uniseriate ray height and cell number were determined. As the exotic pine tree-ring chronology was consistent with the foreign standard tree-ring chronology and displayed high statistical significance, the country and region where the pine samples had been felled and the exact felling date were confirmed. According to the results, which compared tracheid length and uniseriate ray size, no difference was observed between the Korean red and Russian pines. However, the tracheid length of the Russian pines turned out to be slightly longer than the length of the Korean red pine. Additional research securing a larger number of exotic pines (P.resinosa, P.sylvestris) is required to yield more accurate results in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.6
• /
• pp.5-12
• /
• 1995

In this paper, acoustic analysis of thermoacoustic refrigerating system was given and the design procedure meeting the specifications was presented. The thermoacoustic refrigerator transforms the sound wave energy into the thermal energy via adiabatic process of inert gas. The system is composed of mainly three parts ; the acoustic motor utilizing loudspeaker the stack of plate for thermal transport and the resonator to form the standing wave. Based upon the acoustic analysis, resonator dimension and stack position and size were decided, and the entire refrigerating system was designed to the given specification. Also the mechanical Impedance of the designed resonator was obtained by simulation.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.528-535
• /
• 2001

Polyurethane specimens were mainly composed of polyol, MDI, silicone surfactant, and water. The effects of ethylene glycol on the cell size, forming magnification, cream time, gel time, take free time, final free rising height, and reactive temperature were investigated. The cyclopentane was used for PU foam as a physical blowing agent. The components were hand-mixed at about 5000 rpm within 4 seconds at room temperature. The mixtures with various ethylene glycol contents were foamed in the wood mold. When the index of isocyanate was fixed, as the amount of ethylene glycol increased, cell size and thermal conductivity were decreased by about 5.1% and 14%, respectively.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.432-437
• /
• 2011

Recently, industry needs a new design of Czochralski(Cz) process for higher productivity with reasonable energy consumption. In this study, we carried out computational simulations for finding out a new optimal design of Cz process with variables which can be applied in real industry such as location of heater, shape of shield and crucible size. Objective process was Cz process which can be produced 8 inch diameter Si ingot for solar cell and we acquired an optimal design for higher productivity, low power consumption with stable production condition. For higher productivity we also change the crucible diameter from 22 inches to 24 inches with changing insulation thickness only because the process housing size could not be changed in industry.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.874-880
• /
• 2017

In this study, we performed numerical simulation of the adsorptive desulfurization reactor for a 100 kW fuel cell. Using experimental results and the adsorption kinetics theory, the adsorption rate of sulfur in diesel was estimated and verified by numerical analysis. By analyzing the performance of desulfurization according to reactor size, the optimal reactor size was determined. By maximizing processed diesel amount, optimal diesel flow rate was determined. Regeneration process was also confirmed for the obtained optimal reactor size. The present work will be utilized to design a diesel desulfurization reactor for a fuel cell used in a ship by further process modeling and economic analysis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.6
• /
• pp.553-563
• /
• 1984

Heat transfer modeling was performed in order to study a natural solar heating system. Simulation of the system was obtained by writing instantaneous energy balance equations for the various components. A thermal-network provided the means for systematically accounting for each of the energy balances. The resulting balances were solved using time varying inputs, such as solar gain and ambient temperature, and the initial temperatures of the components. Parametric heat transfer calculations were performed. Results are discussed which illustrate several effects, including variation of thermal capacity of the storage wall, installation of night insulation, installation of a thermally controlled fan between the sunspace and room, and variation of the width of the sunspace.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.753-757
• /
• 1996

연전식 제습기는 제습판과 발열판, 열전식 열펌프, 팬과 모타, 직류 전원공급 장치로구성되어 있으며, 열전식 열펌프에 직류전원을 공급하면 고온면과 저온면이 발생하는 데 저온면의 온도룰 로점온도 이하로 냉각하여 공기중에 있는 수분을 제거하는 원리를 이용한 것이다. 초기 단계로 개발된 열전식 열펌프를 이용한 열전식 제습기(TED-92)는 기계식 제습기에 비하 여 제습효율이 너무 낮기 때문에, 본 연구에서는 여러 문제점을 개선하는 방법으로 열전식 열펌 프의 선정, 핀 설계, 제습기의 설계 등을 중점적으로 개선하여열전식 제습기 (TED-95)를 개발하 였다. 여러가지 방법으로 실험한 결과, 열전식 열펌프 CP1.4-127-045L 2개를 사용하여 발열판의 크기를 300 mm로 하여 단열재를 사용하지 않고 입력 전류를 4A를 입력하였을 때 단위전력당 제 습량이 가장 많았다. 열전식 제습기와 기계식 제습기를 비교실험 해본 결과, 열전식 제습기가 기 계식 제습기에 비해 약 21%의 제습효율을 나타 내었다. 그러므로 초기의 열전식 제습기 (TED-92) 보다 약 2배의 제습효율을 높였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.1
• /
• pp.11-19
• /
• 2010

An approach to reduce cancellation errors of the temperature preconditioned Navier-Stokes equations is proposed. This approach is also applied to the conventional preconditioning methods. Adiabatic laminar viscous flows around a circular cylinder are calculated at different Mach numbers. It is shown that a redefinition of total enthalpy for reducing magnitude of the enthalpy remarkably alleviates cancellation problems of the temperature preconditioning.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.447-453
• /
• 2003

연구지역은 경남 양산시 상북면 삼삼리 일원으로 양산단층과 인접하며 급한 경사의 자연사면으로 이루어져 있다. 수치지형자료를 이용하여 고도값을 갖는 자료층을 추출한 후 10m$\times$10m 크기의 격자별로 DEM으로 변환하고, 이로부터 단위 격자의 경사도, 경사방향도, 음영도를 작성하고 흐름분배 알고리즘을 이용하여 설정된 격자별로 상부사면의 기여면적과 습윤지수를 산정하였다. 높은 습윤지수를 보이는 지역은 북서-남동 방향의 선형구조로 나타나며, 국소지역의 전단단열 특성과 일치한다. 한편 연구지역에서 전기비저항 탐사를 실시하여 높은 습윤지수를 나타내는 지역과 저비저항 이상대의 분포를 비교한 결과 습윤지수가 높은 지역은 모두 낮은 전기비저항 이상대로 관찰된다. 즉 습윤지수는 암석의 화학적 풍화를 수반하는 파쇄대의 분포와 일치하며 이를 토대로 국소지역에서 파쇄대의 예측과 암석의 안정성을 예측하는 방법으로 이용될 수 있다.