• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.519-532
• /
• 2017

Studies on ancient ironmaking technologies are primarily based on archaeological surveys and scientific analysis data, and technological systems are examined by comparing the results of restorative experiments. In this study, to examine the ancient iron production technologies such as smelting and smithing in the Jungwon area, a restoration experiment was conducted based on archaeological data, and the iron and slag, etc. produced in the experiment were analyzed. Further, the changes in physicochemical properties due to the smelting of the raw material, specifically, iron ore were determined, and the smithing process, which involves fabrication of ironwares, was analyzed along with the characteristics of each step. In the case of smelting, increasing recovery rates and production of high-quality primary iron material were important for the following processes. For the iron bars produced through the smithing process, it was found that quality improvements made by reducing physical defects such as inclusions or gas holes were more important than the composition of the iron itself. The study also yielded comparative study data for various byproducts, such as smithing slag, which could be utilized in other ironmaking technology studies.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.581-593
• /
• 2018

Studies on ancient iron production technologies still have challenges to overcome, although there have been many results that have enabled us to understand these old technologies. The purpose of this study is to propose a suitable temperature condition for smelting experiments. The target for reconstruction is a smelting-smithing process in the ancient Jungwon area, and the experiment was designed on the basis of published research, such as archaeological evidence. Experiment A was performed at a low temperature to produce low-carbon iron, while Experiment B was conducted at a relatively high temperature to synthesize high-carbon iron. In addition, the low-carbon iron proved to be suitable for the smithing process. Moreover, aspects such as the microstructure and chemical composition of the slag and the surface condition of the furnace wall showed that the low-temperature smelting process was closer to the ancient method. It is important to mention the premise that the reconstruction of ancient technology can be achieved when the results of an experiment replicate the conditions of a real site. The results show that direct smelting, which produces low-carbon iron bloom under a low-temperature condition, should be the subject of smelting experiments concerning the iron production technologies of the ancient Jungwon area.

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.440-452
• /
• 2019

This research has analyzed SI, the traditional steel, and SIHS(SI + HS), SICS(SI + CS), and SINiS(SI + NiS), the materials that were produced through welding and reprocessing three modern steel- HS, CS, and NiS- that have different carbon content. The purpose of the analyzation was to improve the definition of the multi-layered pattern that appears in the forging process. In observing modified structures on the commissures of three modern steel that have different carbon component to the SI, SINiS produced the most significant multi-layered pattern as well as the excellent welding quality. The excellent welding quality was due to the content of nickel which helped the forge welding process with other materials. There was no significant difference in crystal grain per materials, and SICS showed the highest hardness. At the measurement of EPMA for commissures of the materials, SINiS showed the highest definition of the multi-layered pattern due to the nickel and carbon content. The results above showed that the carbon steel with nickel content is the best material for the most definite multi-layered pattern, expressed from the multi-layered structure which is a characteristic of traditional forge welding technology. It is expected that the result of this research can be utilized as the technical data in further researches regarding the relics excavated from ancient welding process and their multi-layered structure and patterns.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.4
• /
• pp.138-153
• /
• 2015

A Jincheon Seokjangri B23 furnace was reconstructed and iron smelting experiment was performed to investigate an ancient Baekjae iron production process. The work mainly described in this paper is the $1^{st}$ and $2^{nd}$ experiments among the several experiments carried out at Jungwon National Research Institute of Cultural Heritage. Iron ore(magnetite) and oak charcoal were used as a source and a foot bellow was used for air supply. Common results of the experiments are masses of iron, slag and charcoal formed in the furnace. Most iron lumps were formed nearby the tuyere rather than the area of tapping hole. Metallographic and chemical analysis shows that the iron lumps can be used for either forge or cast depending on their carbon content. Low Fe content and glassy texture of the inner slags suggest that the operation environment was quite reducing. Based on the results of the iron smelting experiments, measurements and analysis, various information was obtained regarding physical-chemical and metallurgical processes of the ancient iron smelting process. It is firmly believed that its undisclosed contents can be revealed more in depth with continual reconstitution experiments.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.79-82
• /
• 2003

대부분의 신 간척지 논은 점토 함량이 적은 반면 미사 함량이 많고 토양 콜로이드의 분산제 역할을 하는 Na함량이 높기 때문에 이러한 토양은 입단화가 저해되고 투수성이 불량해 진다. 이러한 투수와 더불어 다량의 SiO$_2$, F$_2$, MR, MgO 등이 하층으로 용출되어 투수성과 통기성을 저하시키고 간척지 토양의 토양 물리화학적 불량에 의한 저수확답의 원인의 되어 벼의 재배가 어렵고 생산성이 낮아 경제성을 기대하기 어렵다. (김, 1992 : 고건, 1988 ;단야, 1983 ; 전중등, 1974). 따라서 본 실험에서는 토양의 염분농도차이가 토양화학성과 수량에 미치는 영향을 검토하여 간척지 토양의 경제성을 높이는데 기초자료로 활용코자 시험한 결과는 다음과 같다. 1. 출수기는 0.1%의 염분농도 토양은 8월15일, 0.4%의 염분농도 토양은 8월 20일, 0.8%의 염분 농도 토양은 8월 25일로서 0.1%의 염분농도 토양이 가장 빨랐다. 2. 쌀수량은 토양의 염분농도가 0.1%로 낮은 토양이 599kg/10a로 가장 많았고, 다음으로는 0,4%의 염분농도 토양이 568kg/10a이었고 0.8%의 염분농도 토양은 446kg/10a로 가장 낮았으며 쌀수량 구성요소 역시 같은 경향으로 0.1%의 염분농도 토양에서 가장 우수하였고 다음으로는 0.4%, 0.8%순으로 나타났었다. 3. 쌀수량과 토양의 이화학적 특성간의 상관에서는 pH와는 부의 상관, 유기물, 인산, 질소, 가리, 칼슘, 마그네슘의 함량간에는 정의상관이있다. 4. 전남광양만 간척지에서 쌀수량과 수량 구성요소면에서 볼때에 적합한 토양의 염분농도는 0.1%이라고 사료된다.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.144-179
• /
• 2010

Investigation into iron manufacture relics has been active since 1970s, especially accelerated in 1990s across the country. Consideration of the importance of production site relics has lately attracted attention to iron manufacture relics. Methodological studies of the investigation into iron manufacture relics, however, were less made compared with those of the investigation into tomb, dwelling, or swampy place relics. It is because the process of iron manufacture is too complicated to understand and also requires professional knowledge of metal engineering. With the recognition of these problems this research is to form an opinion about how to excavate, to rearrange and classify, and to examine iron manufacture relics, based upon the understanding of the nature of iron, iron production process, and metal engineering features of related relics like slag, iron lumps and so on. This research classifies iron manufacture relics into seven types according to the production process; mining, smelting, refining, tempering, melting, steelmaking, and the others. Then it arranges methods to survey in each stage of field study, trial digging, and excavation. It also explains how to classify and examine excavated relics, what field of natural science to be used to know the features of relics, and what efforts have been made to reconstruct a furnace and what their problems were, making the best use of examples, drawings, and photos. It comes to the conclusion, in spite of the lack of in-depth discussion on application and development of various investigation methods, that iron manufacture relics can be classified according to the production process, that natural sciences should be applied to get comprehensive understanding of relics as well as archeological knowledge, and that efforts to reconstruct a furnace should be continued from the aspect of experimental archeology.