• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.57-63
• /
• 1998

The electrical resistivity method, one of old and widely used geophysical prospecting methods, has extended its scope to civil & environmental engineering areas. The electrical resistivity imaging technique was performed at the waste disposal site located in Junju to verify the applicability to the environmental engineering area. The dipole-dipole array, with the dipole spacing of 10 m, was applied along eight survey lines. The field data were obtained under the control of automatic acquisition softwares and topographic effects were corrected during processing stage. The processed resistivity images show that very low resistivity develops inside the disposal site and the distribution of low resistivity is exactly in accord with the boundary of the site except the river side. The depth of low resistivity zones is deeper toward the river side, which is interpreted that there is a high possibility for contaminants to be scattered to the river. From resistivity images, it was feasible to deduce the depth of waste disposal as well as the horizontal/vertical distribution of the contaminated zone, which proved the applicability of the electrical resistivity imaging technique to the environmental engineering area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.1
• /
• pp.101-108
• /
• 2024

The total number of railroad stations managed in Korea is 322 (including general and wide-area railways), and a considerable number of stations are aging. In terms of the size of the existing railway station and the number of entrances, it has not been possible to secure adequate service capacity, and the demand for station improvement is increasing due to changes in surrounding conditions such as urban development. In the past, railroad stations were focused on the simple function of a connection passage in terms of maintenance or management, but in recent years, railroad stations are also changing to an atmosphere that they should be reborn as a user-centered comfortable, convenient, and safe service provision space. In this study, a case study related to the improvement of the old railway station was conducted to derive an improvement plan that meets the improvement standard of the old station, and the service level evaluation standard was developed. By introducing the concept of service level (LOS) in the development model, station congestion, station movement convenience, and station safety were selected as evaluation indicators. In addition, this development model applied an analytical stratification technique to divide various evaluation elements of each indicator into major and detailed elements and derive the relative importance of the elements by class. Priority for improvement was derived using the ratio of the number of E and F on the LOS for each facility. Based on this study, it is expected to be helpful in using it as an evaluation criterion for improving objective and equitable railway station.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.2 s.34
• /
• pp.221-231
• /
• 1991

A case-control study was conducted to investigate the risk factors (Part of job, Obesity, Alcohol, Smoking, Milk, Salt. and Family history) for hypertension. We selected 330 hypertension cases (male;247, female;83) and 1,336 controls (male;887, female;449) from employees in Taegu city from 1 May to 30 November, 1908. Data was analysed using a logistic regression model. Statistically significant elevated odds ratio were noted for alcohol (odds ratio=3.23), obesity (odds ratio=2.31), salt(odds ratio=1.75) in male (p<0.05) and those in female were noted for alcohol (odds ratio=16.49), family history(odds ratio=3.70), obesity (odds ratio=1.74) and salt (odds ratio=1.73) (p<0.05). Statistically significant reduced odds ratio was noted for milk in both sexes (odds ratio=0.69 for male and 0.65 for female)(p<0.05) and the dose-response relationship between milk intake and hypertension was confirmed (p<0.05). Therefore, milk seems to be preventive factor for hypertension. Smoking was not significantly associated with hypertension in both sexes. The part of job was significantly associated with hypertension in female by simple analysis (P<0.05) but the relationship was disappeared when multivariate analysis (logistic regression analysis) was done.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.1
• /
• pp.1-11
• /
• 2015

Gyeongju, Silla capital, hasn't paid much attention to a value of fortress as advanced frame of landscape all the while. All have done until now were maintaining lots of fortress including Gyeongju and setting night landscape lighting for them or building a trail in mountain fortress. Hereupon, this study tried to take a look at historical and scenic value of fortress, landscape frame of Gyeongju-Silla capital, based on Wolseong and Myeonghwalseong and find the way to contribute to it on landscape architectural level. As Wolseong(月城) and Myeonghwalseong(明活城) functioned as royal palace in Silla Dynasty, they need some research and study on fortress inside in detail rather than restoring them by simply maintaining the shapes. While Wolseong has overall excavation investigation going on, Myeonghwalseong representing mountain fortress area is losing its value due to unbefitting management to a title of world heritage. If conducting close research and study on these remains, it seems like it could contribute a lot to landscape architectural research of Silla royal palace through tracks, which will be used as royal palace. Here I suggest research direction on landscape architectural level about fortress remains in Gyeongju area as followings. Firstly, away from all research focusing on fortress shape, consecration way, etc, we need to conduct a research comprisable of inner space of fortress. As Wolseong and Myeonghwalseong functioned as royal palace in Silla Dynasty, it'll be possible to research about ponds, Nu-Jeong(樓亭), drainage facilities, oddly shaped stones, moundings, pavements, circulation systems, planting traces, etc. For this, we need to research and study through comparison with cases of China, Japan and Goguryeo of the same age. Secondly, applying garden archaeological way is possible to translate objectively regarding research of ancient garden with low literature record. But attainable achievement and information will be limited if implementing excavation based on archaeology as excavations so far regarding excavation investigation of Wolseong. The alternative to such problem is participation plan of landscaping field through the foundation of garden archaeology. We might be able to attain many results on landscape architectural level from research, if conducting research and study about Silla capital including Wolseong by applying garden archaeology such as collection of environmental sample and discovery and analysis of remains through aerial photograph, archaeological research, analysis of historical building, surface exploration, excavation technique, analysis of soil and flowerpot, etc. For this, many people majored in landscape architecture need to try and acquire archaeological knowledge. Also, we need to call attention to internal garden archaeology through international academic symposium by inviting global experts in garden archaeology field. I've suggested the study of location of Wolseong and Silla fortress in Gyeongju area, plan research on using and treating trees about the space in and out of fortress and landscape architectural research direction of Wolseong fortress.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9B
• /
• pp.610-618
• /
• 2005

As developed Internet and Computer Capability, Many Users take the many information through the network. So requirement of User that use to network was rapidly increased and become various. But it spend much time to accept user requirement on current network, so studied such as Active network for solved it. This Active node on Active network have the capability that stored and processed execution code aside from capability of forwarding packet on current network. So required execution code for executed packet arrived in active node, if execution code should not be in active node, have to take by request previous Action node and Code Server to it. But if this execution code take from previous active node and Code Server, bring to time delay by transport execution code and increased traffic of network and execution time. So, As used execution code stored in cache on active node, it need to increase execution time and decreased number of request. So, our paper suggest ANC caching technique that able to decrease number of execution code request and time of execution code by efficiently store execution code to active node. ANC caching technique may decrease the network traffic and execution time of code, to decrease request of execution code from previous active node.

• Journal of the Society of Disaster Information
• /
• v.15 no.2
• /
• pp.249-258
• /
• 2019

Purpose: The purpose of this study is to attain the correlation analysis and thereby to deduce the uniaxial compressive strength of rock specimens through the elastic wave velocity and the elastic modulus among the physical characteristics measured from the rock specimens collected during drilling investigations in Seoul and Gyeonggi region. Method: Experiments were conducted in the laboratory with 119 granite specimens in order to derive the correlation between the compressive strength of the rocks and elastic wave velocity and elastic modulus. Results: In the case of granite, the results of the analysis of the interaction between the compressive strength of a rock and the elastic wave velocity and elastic modulus were found to be less reliable in the relation equation as a whole. And it is believed that the estimation of the compressive strength by the elastic wave velocity and elastic modulus is less used because of the composition of non-homogeneous particles of granite. Conclusion: In this study, the analysis of correlation between the compressive strength of a rock and the elastic wave velocity and elastic modulus was performed with simple regression analysis and multiple regression analysis. The coefficient determination ($R^2$) of simple regression analysis was shown between 0.61 and 0.67. Multiple regression analysis was 0.71. Thus, using multiple regression analysis when estimating compressive strength can increase the reliability of the correlation. Also, in the future, a variety of statistical analysis techniques such as recovery analysis, and artificial neural network analysis, and big data analysis can lead to more reliable results when estimating the compressive sterength of a rock based on the elastic wave velocity and elastic modulus.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.105-115
• /
• 2002

For many rears, traffic accident statistics are the most direct measure of safety for a signalized intersection. However it takes more than 2 or 3 yearn to collect certain accident data for adequate sample sizes. And the accident data itself is unreliable because of the difference between accident data recorded and accident that is actually occurred. Therefore, it is rather difficult to evaluate safety for a intersection by using accident data. For these reasons, traffic conflict technique(TCT) was developed as a buick and accurate counter-measure of safety for a intersection. However, the collected conflict data is not always reliable because there is absence of clear criteria for conflict. This study developed objective and accurate conflict criteria, which is shown below based on traffic engineering theory. Frist, the rear-end conflict is regarded, when the following vehicle takes evasive maneuver against the first vehicle within a certain distance, according to car-following theory. Second, lane-change conflict is regarded when the following vehicle takes evasive maneuver against first vehicle which is changing its lane within the minimum stopping distance of the following vehicle. Third, cross and opposing-left turn conflicts are regarded when the vehicle which receives green sign takes evasive maneuver against the vehicle which lost its right-of-way crossing a intersection. As a result of correlation analysis between conflict and accident, it is verified that the suggested conflict criteria in this study ave applicable. And it is proven that estimating safety evaluation for a intersection with conflict data is possible, according to the regression analysis preformed between accident and conflict, EPDO accident and conflict. Adopting the conflict criteria suggested in this study would be both quick and accurate method for diagnosing safety and operational deficiencies and for evaluation improvements at intersections. Further research is required to refine the suggested conflict criteria to extend its application. In addition, it is necessary to develope other types of conflict criteria, not included in this study, in later study.

• Journal of Intelligence and Information Systems
• /
• v.23 no.2
• /
• pp.39-70
• /
• 2017

Data-drive analytics techniques have been recently applied to public surveys. Instead of simply gathering survey results or expert opinions to research the preference for a recently launched product, enterprises need a way to collect and analyze various types of online data and then accurately figure out customer preferences. In the main concept of existing data-based survey methods, the sentiment lexicon for a particular domain is first constructed by domain experts who usually judge the positive, neutral, or negative meanings of the frequently used words from the collected text documents. In order to research the preference for a particular product, the existing approach collects (1) review posts, which are related to the product, from several product review web sites; (2) extracts sentences (or phrases) in the collection after the pre-processing step such as stemming and removal of stop words is performed; (3) classifies the polarity (either positive or negative sense) of each sentence (or phrase) based on the sentiment lexicon; and (4) estimates the positive and negative ratios of the product by dividing the total numbers of the positive and negative sentences (or phrases) by the total number of the sentences (or phrases) in the collection. Furthermore, the existing approach automatically finds important sentences (or phrases) including the positive and negative meaning to/against the product. As a motivated example, given a product like Sonata made by Hyundai Motors, customers often want to see the summary note including what positive points are in the 'car design' aspect as well as what negative points are in thesame aspect. They also want to gain more useful information regarding other aspects such as 'car quality', 'car performance', and 'car service.' Such an information will enable customers to make good choice when they attempt to purchase brand-new vehicles. In addition, automobile makers will be able to figure out the preference and positive/negative points for new models on market. In the near future, the weak points of the models will be improved by the sentiment analysis. For this, the existing approach computes the sentiment score of each sentence (or phrase) and then selects top-k sentences (or phrases) with the highest positive and negative scores. However, the existing approach has several shortcomings and is limited to apply to real applications. The main disadvantages of the existing approach is as follows: (1) The main aspects (e.g., car design, quality, performance, and service) to a product (e.g., Hyundai Sonata) are not considered. Through the sentiment analysis without considering aspects, as a result, the summary note including the positive and negative ratios of the product and top-k sentences (or phrases) with the highest sentiment scores in the entire corpus is just reported to customers and car makers. This approach is not enough and main aspects of the target product need to be considered in the sentiment analysis. (2) In general, since the same word has different meanings across different domains, the sentiment lexicon which is proper to each domain needs to be constructed. The efficient way to construct the sentiment lexicon per domain is required because the sentiment lexicon construction is labor intensive and time consuming. To address the above problems, in this article, we propose a novel product reputation mining algorithm that (1) extracts topics hidden in review documents written by customers; (2) mines main aspects based on the extracted topics; (3) measures the positive and negative ratios of the product using the aspects; and (4) presents the digest in which a few important sentences with the positive and negative meanings are listed in each aspect. Unlike the existing approach, using hidden topics makes experts construct the sentimental lexicon easily and quickly. Furthermore, reinforcing topic semantics, we can improve the accuracy of the product reputation mining algorithms more largely than that of the existing approach. In the experiments, we collected large review documents to the domestic vehicles such as K5, SM5, and Avante; measured the positive and negative ratios of the three cars; showed top-k positive and negative summaries per aspect; and conducted statistical analysis. Our experimental results clearly show the effectiveness of the proposed method, compared with the existing method.

• Korean Journal of Environment and Ecology
• /
• v.37 no.4
• /
• pp.273-288
• /
• 2023

Although many studies have been conducted on techniques and effects that can be applied to forest meditation in domestic forest healing meditation research, there has been little research on the space where forest meditation takes place. Nevertheless, a meditation space is not just a place concept but a forest environment element responsible for the healing function of a forest, i.e., a place containing healing factors, and can be an essential clue to the healing mechanism. Therefore, to determine whether a healing forest meditation space is suitable for meditation, this study selected the attribute items of the meditation space using the Delphi expert survey and then surveyed the user satisfaction of the healing forest meditation space using the IPA (Importance Performance Analysis) technique. The survey was conducted from August to November 2022, targeting 315 adults who used the forest meditation space at the National Center for Forest Therapy, the Saneum Healing Forest, and the Jathyanggi Pureunsup Arboretum in Gyeonggi Province. The result of the IPA analysis showed the average satisfaction with the forest meditation space was relatively high at 4.33 points on a 5-point Likert scale (4.33 points for the National Center for Forest Therapy, 4.34 points for the Saneum Healing Forest, and 4.37 points for the Jathyanggi Pureunsup Arboretum), indicating that the three healing forest meditation spaces were suitable for forest meditation. Satisfaction with the "Sounds of nature" was high in all three forests. On the other hand, all three forests showed a relatively low satisfaction with "Quietness," indicating it to be a priority problem to be addressed. Also, an open-ended questionnaire survey showed that the mediation space's natural elements, such as natural sounds, scenery, air, forest spaces, and scents, had a higher positive impact on meditation satisfaction than artificial elements, such as facilities. Therefore, it is essential to secure sound resources such as the sound of water and birds around the meditation space, and it is also necessary to consider ways to create a meditation forest in an independent area to avoid encounters with visitors and allow only participants in the forest healing meditation program to enter to increase satisfaction with forest meditation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1A
• /
• pp.11-18
• /
• 2012

This paper deals with the numerical determination of the stress intensity factors of cracked aluminum plates under the mixed mode of $K_I$ and $K_{II}$ in glass-epoxy fiber reinforced composites. For the stress intensity factors, two different models are reviewed such as VCCT and two-step extension method. The p-convergent partial layerwise model is adopted to determine the fracture parameters in terms of energy release rates and stress intensity factors. The p-convergent approach is based on the concept of subparametric element. In assumed displacement field, strain-displacement relations and 3-D constitutive equations of a layer are obtained by combination of 2-D and 1-D higher-order shape functions. In the elements, Lobatto shape functions and Gauss-Lobatto technique are employed to interpolate displacement fields and to implement numerical quadrature. Using the models and techniques considered, effects of composite laminate configuration according to inclined angles and adhesive properties on the performance of bonded composite patch are investigated. In addition to these, the out-of-plane bending effect has been investigated across the thickness of patch repaired laminate plates due to the change of neutral axis. The present model provides accuracy and simplicity in terms of stress intensity factors, stress distribution, number of degrees of freedom, and energy release rates as compared with previous works in literatures.