• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.99-104
• /
• 2010

In this paper, the internal antenna for mobile communication handset which is able to control both coupling coefficient and resonant frequency without any major modification of radiator and ground plane of PIFA(Planner Inverted F Antenna). The resonant frequency as well as amount of coupling between feeding point and shorting post can be adjusted by changing inductance. Because the inductor is connected on shorting post where the strength of electric field is weak, the performance reduction of the proposed antenna is very small enough to neglect. For the variation of the inductance value within 3.3nH, the resonant frequency of antenna can have operating range of 1650MHz ~ 1830MHz. And as be increased the inductance, the coupling coefficient of antenna is over coupled. This means that it can be electrically controlled the resonant frequency and input impedance of antenna by inductance and minimized the mismatch loss. Size reduction of 10% for PIFA is obtained without any major modifications of antenna elements. For the frequency range from 1650 to 1830MHz, reduction of the measured antenna gain is within 0.93dB as varying the value of inductance from 0 to 3.3nH.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2194-2200
• /
• 2010

In this paper, the power detectors using metamaterials were designed and fabricated for multi-band six-port direct conversion method. The RF short-stubs for power detector were designed by using metamaterials which provide multi-band characteristics. The power detectors with metamaterial RF short-stub were analyzed and fabricated by using lumped and distributed element. The measured results of metamaterial power detectors show the good agreement with the simulation results. The performance of lumped-metamaterial RF short-stub shows the insertion loss below 1 dB and the good frequency response characteristics. Also, the distributed-metamaterial RF short-stub shows the good frequency response characteristics and the insertion loss under that of lumped-metamaterial RF short-stub. The multi-band power detectors with metamaterial RF short-stub detect the input RF signal in the designed dual frequency bands very well.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.497-499
• /
• 2013

In this paper, electrical lengths and impedances of a dual-mode resonator are calculated by using the transfer function of a dual-mode resonator by realizing the short-stub. The electrical length of transmission-line for a resonator is function of the frequency and the electrical length of stub is defined by the frequency and impedances of line and stub. Also, the inverter value of a bandpass filter using the dual-mode resonator is calculated. The effect of stub's impedance for inverter is very small. And, as the impedance of line is decreasing, the inverter value is increasing and as the bandwidth is increasing, the inverter value is increasing.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.59-66
• /
• 2010

In this paper, the internal antenna for mobile communication handset which is able to control both coupling coefficient and resonant frequency without any major modification of radiator and ground plane of antenna. Novel internal antenna with its controllable resonant frequency is presented for triple-band or over mobile handsets. The operating range can include GSM(880~960 MHz), GPS($1,575{\pm}10MHz$), DCS(1,710~1,880MHz), US-PCS(1,850~1,990 MHz), and W-CDMA(1,920~2,170 MHz). The proposed antenna is realized by combination of a half wavelength loaded line antenna and PIFA(Planner Inverted F Antenna). A single shorting and feeding points are used and they are common to both antenna structures. One of two inductors which is placed at each shorting post, one inductor is for adjusts amount of coupling, and the other controlling the resonant frequency in DCS/US-PCS/WCDMA bands. The inductance range for control of input impedance is between 0nH and 6.8nH, and each of gain variation in GSM, GPS and DCS/US-PCS/WCDMA band is under 0.15dBi, 0.73dBi and 0.29dBi. The inductance range for control of the resonant frequency is between 1640MHz and 2500MHz, and each of gain variation in GSM, GPS and DCS/US-PCS/WCDMA band is under 0.46dBi, 0.53dBi and 0.8dBi.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1168-1177
• /
• 2004

This paper presents the characteristics of the electromagnetically coupled small broadband disk-loaded monopole antenna with multiple shorting pins. The electromagnetically coupled monopole antenna can achieve broad bandwidth by controlling resonant frequency of the rectangular disk-loaded monopole and a probe with the spiral strip line monopole. The number and arrangement of the shorting pin affect the capacitance of the disk. The variation of the capacitance changes resonant frequency of the antenna, and therefore, its electrical sizes and frequency bandwidth are also affected. The antenna with three shorting pins has a volume of $0.094\lambda_0{\times}0.094\lambda_0{\times}0.094\lambda_0$ in electrical length and the frequency bandwidth of $26.8\%\;for\;VSWR\leq2$ with the center frequency at 2.556 GHz.

• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.75-84
• /
• 1995

In GMA welding of sheet metal, the short circuit metal transfer mdoe is preferred because of its low heat input and capability of bridging the root gap. The molten electrode is transferred to the workpiece during repectitive short circuit in the model. The waveform of welding current or voltage and the frequency of short circuiting are affected by a number of factors including: magnitude of welding current and voltage, root gap, electrode extension, power supply characteristics, and so on. In this study experimental models were proposed, which are able to determine the relationship between the root gap and short circuit frequency and the relationship between the root gap and appropriate welding speed that produces the good quality of back bead without burn through. Using the experimental models, the root gap can be obtained from measuring the short circuit frequency, and then the appropriate weldig speed to the root gap can be determined. Thus a back bead control system was constructed by controlling the welding speed for maintaining the quality of back bead. The developed system has shown the successful capability of back bead control.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.811-818
• /
• 2002

In this paper, a shorting pin and slot-loaded microstrip patch antenna is designed and fabricated. A shorting pin and slots are used for harmonic suppression on an inset fed antenna. A shorting pin and slot properties are analyzed by cavity model of the rectangular patch and the characteristics of the designed antenna are described. The designed antenna provides a gain of 7 dBi at the fundamental frequency, 5.8 GHz. In the second and third harmonic frequencies, the proposed antenna has gain suppression properties of -3.3 dB and -14.3 dB at each harmonic frequency, respectively.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1167-1168
• /
• 2007

본 논문은 KTX36호(300km/h) 운행시 수집된 검측데이터를 효과적으로 분석하여 유지보수에 활용하기 위한 단락전류의 반파장주기(${\lambda}$/2)에 관한 연구수행 결과를 나타낸다. KTX36호는 현재 하나의 객실을 검측차로 개조하여 운행속도에서 각종 검측을 수행하고 있다. 우리나라의 고속선 궤도회로는 프랑스의 궤도회로와 달리 토공, 교량, 터널 구간으로 나뉘어 있으며, 상용전원 주파수도 프랑스는 50Hz, 우리나라는 60Hz를 사용하고 있어 정보전송을 위해 사용하는 반송주파수도 다르다. 또한 특성임피던스 와 감쇠정수/위상정수를 결정짓는 중요한 변수인 선로정수(R,L,G,C)가 다르기 때문에 KTX36호의 단락전류에 대한 반파장주기(${\lambda}$/2)는 검측데이터를 활용한 유지보수에 있어 매우 중요한 역할을 한다. 본 논문에서는 프랑스에서 사용하는 단락전류의 반파장주기 (${\lambda}$/2)에 대해 언급하고 연구결과 산출된 국내 단락전류의 반파장주기(${\lambda}$/2)를 비교하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.97-102
• /
• 2008

A new internal antenna for GSM/DCS/Bluetooth application is proposed by using a folded loop resonator. Both feed leg and shorting leg are symmetrically implemented at the center of the folded loop, thus leading to produce resonances at integer frequencies of quarter wavelength. An open stub added at one end of the folded loop can reduce resonant frequencies. The open stub play a role in generating PIFA structure at a GSM band, thus increasing bandwidth, Two resonances at the GSM band are observed at folded ring and PIFA, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.7
• /
• pp.713-718
• /
• 2008

A modified broad-band ring hybrid balun with additional two shorted $\lambda$/4 stubs is proposed. The proposed balun is a modified version which has additional two shorted $\lambda$/4 stubs to compensate phase and amplitude imbalances of conventional ring hybrid coupler. To demonstrate the validity of the proposed balun, a balanced Schottky-diode frequency doubler is designed and measured. Measurement data show that the proposed frequency doubler has around 10 dB conversion loss and more than 30 dB fundamental suppression over an input range of $1.6{\sim}2.35\;GHz$.