• 전기의세계
• /
• v.42 no.12
• /
• pp.34-42
• /
• 1993

고효율 전동기의 국내외 기숙현황을 분석하여 보면 미국, 캐나다, 일본등 선진국에서는 핵심기술을 발전시키는 단계이며, 효과적인 수요관리 프로그램을 마련하여 고효율 전동기의 사용을 확대해 나가고 있다. 따라서 전동기 산업의 국네 경쟁력을 향상시키고, 수요관리 측면에서 적극적인 에너지 절약을 위해서는 고효율 전동기 설계기술, 시험평가기술, 재료기술 및 생산기술 개발에 투자가 이루어 져야하고 정부의 지원하에 산,학,연의 협동체제를 구축하여 체계적이고 대체적으로 추진하여야 할 것이다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.266-267
• /
• 2003

대량의 정보가 생산되고 유통되는 21 세기 정보화 사회에 있어 정보사기 및 위조는 가깝게는 은행, 사업자, 소비자를 위시한 경제 활동 관계자로부터 크게는 정보 사회 전 분야에 있어 가장 시급하고 중요한 과제이다. 그러나 높은 단계의 보안성을 갖으며 실-시간 처리가 가능한 전자적 보안 시스템의 부재는 정보보호 기술개발의 다급함에도 불구하고 정보보호를 위한 해를 제시하지 못하고 있는 실정이다. 기존의 정보보안 장치에서 정보의 암호화는 암호 키(key)를 이용하여 전자적인 방법으로 암호화해 전송하고, 전송된 신호를 전자적인 방법으로 복호화하는 과정을 통해 이로어졌다. (중략)

• Proceedings of the Korean Society for Information Management Conference
• /
• 2014.08a
• /
• pp.43-47
• /
• 2014

대학교 행정상에서 발생하는 행정기록들은 기록생애에 따라 체계적으로 관리될 수 있지만, 비행정기록의 경우 생산주체가 다양하고, 형태가 다양하여 체계적인 수집 보존이 어렵다. 학과기록, 학생활동 기록과 같은 비행정기록은 대학의 활동 및 발전을 생생하게 알려주는 기능을 하므로 체계적으로 수집하여 활용할 수 있도록 관리하여야 한다. 이를 위한 첫 번째 단계로 비행정기록의 수집방안을 제안하고자 한다.

• Journal of Bio-Environment Control
• /
• v.18 no.1
• /
• pp.23-28
• /
• 2009

This study was conducted to evaluate the effect of optimized environment conditions with growth stage in photoautotrophic micropropagation on the growth of potato (Solanum tuberosum L. cv. Dejima) plantlets and energy efficiency. Optimum environment conditions at each stage were decided in our previous study. For the evaluation of optimized environment control, potato plantlets were cultured under four different conditions: photoautotrophic optimum conditions of photosynthetic photon flux density (PPFD) and $CO_2$ levels with growth stage (POG), photoautotrophic constant condition with average PPFD and $CO_2$ levels (PCA), photoauototrophic constant condition with maximum PPFD and $CO_2$ levels (PCM), and photomixotrophic conventional condition with 3% sucrose (PMC) as control. As a result, environment control with growth stage (POG) significantly promoted all the growth characteristics such as the number of nodes and unfolded leaves, shoot height, shoot diameter, and fresh and dry weights of potato grown in vitro. In addition, based on dry weight consumed electricity and $CO_2$ were the lowest in POG suggesting the highest energy efficiency among the treatments. After transferring potato plantlets to greenhouse, the plantlets under POG showed vigorous growth, which was pretty similar with those under PMC. The accumulations of dry matter in POG were 4.7 times in vitro and 3.8 times in greenhouse as much as those in the conventional control (PCM). Thus, we concluded that in vitro environment control with growth stage induced vigorous growth of potato plantlets both in vitro and in greenhouse with less energy consumption.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.241-244
• /
• 2000

Continuous $H_2$ production from CO and water was studied in a trickle bed reactor(TBR) using Rhodopspedomonas palustris P4. To achieve high cell density, R. palustris P4 were cultivated by a fed-batch culture mode under chemoheterotrophic and aerobic condition, and final cell concentration was 13 g/L. TBR could provide sufficient residence time for CO to contact with cell suspension circulating TBR. The maximum CO uptake rate was found to be 16 mmol/L/hr at gas retention time of 50 min and CO partial pressure of 0.4 atm. In our correlation of the experimental data with mathematical model of TBR, the TBR operation with P4 was found to be lie in an intermediate state between mass transfer limitation and kinetic limitation. Due to the high cell density as well as hydrogen production activity in this study, TBR operation showed a superior performance to other previous reports on microbial hydrogen production.

• Journal of the Korean association of regional geographers
• /
• v.19 no.4
• /
• pp.567-579
• /
• 2013

The purpose of this paper is illuminating positively the perception and compliance rate of local food principles in Korea. The results are as follows. First, in terms of the perception rate, social trust and local production/consumption are the most important components rather than eco-friendliness. This means the importance of both spatial and social aspects of local food concept. Second, in terms of the compliance rate, social trust and shortened food chain are well complied, rather than eco-friendliness and shortened food miles. Third, in terms of the difference between perception and compliance rate, the social aspects such as eco-friendliness, social trust, and shortened food chain has shown relatively smaller difference than the spatial aspects such as shortened food miles and local production/consumption.

• Clean Technology
• /
• v.9 no.3
• /
• pp.145-151
• /
• 2003

This study shows the evaluation and consulting for pollution prevention of dye production by cleaner production methodology. Especially, this study intended to investigate the methods for reduction of process water and recovery of organic solvent (DMF), and to modify the process for higher qualified products in the acid dye production by cleaner production methodology. This methodology, consisting of 7 sequential phases (business leadership decision to start, problem definition, evaluation of the screened options, option selection for implementation, implementation, monitoring and sustainable implementation), is based on initial developments in the USA and Western Europe. Reduction of process water over 25%, recovery of DMF and solubility enhancement of acid dye over 2 times were achieved.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.71-79
• /
• 2021

In the manufacturing industry, there is a transition to multi-item production for reinforcement of competitiveness. Therefore, the hybrid manufacturing technology is increasing. Especially, many efforts in production quality improvement are made through the adoption of the manufacturing execution system and ERP, so it is necessary to operate MES for prompt and effective management. MES should improve ineffective parts in production activities while managing all stages related to production of products. If there is change in the process, the changed items should be reflected to the system. However, most manufacturing execution systems are operated passively and repetitively by system administrators. This study presents a model that system administrators can comprehensively apply reference information about production related requirements on specific line's equipment to the same equipment of other lines. The flexible response for application to production lines is possible thanks to the division of blanket application and selective application of reference information through proposed model.

• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.156-160
• /
• 2005

We consider practical experimental design strategies and analysis to find out whether a modified method give better results than the standard method. The most practical design strategy is for experimenter to make r successive runs under the current standard method and then, change the standard method to a modified method to make another r successive runs under a modified method. To test a statistically significant difference between the population mean of the standard method and a modified method, additional recent data for sufficient number of consecutive responses under the standard method is needed to construct external reference distribution(Box, et al., 1968). Upon those informations unavailable, the practical design strategy is to run the experiment by split plot designs. In this paper, two types of split plot designs are proposed and how to determine efficiently the number of repetition within a given method and replication of those two methods are discussed based on results of the level of significance ${\alpha}$= 0.05 and the power being at least 0.9 at the detectable difference of ${\mu}_2-{\mu}_1=1.5{\times}{\sigma}$.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.36-39
• /
• 2001

최근 web을 기반으로 한 인터넷과 관련한 기술은 선박설계 과정에서 설계 생산성을 향상시키기 위해 새로운 설계 패러다임에 도입되고 있다. Web을 기반으로 한 선박설계는 분산된 설계환경에서 여러 설계 전문가들이 함께 참여할 수 있게 함으로써 설계정보를 동시에 공유할 수 있도록 하며, 원격지에서도 설계자가 원하는 자료를 검색할 수 있도록 해준다. 현재 소형선박을 설계하는 현장에서는 데이터 베이스가 효율적으로 구축되어 있지 않기 때문에 설계 작업시 수작업이 반복적으로 이루어지고 있다. 이러한 수작업의 반복은 설계 과정에서 에러를 발생시키고 각 설계 단계별로 발생하는 설계 데이터의 손실로 인해 생산성을 저하시키는 요인으로 작용될 수 있다. 본 연구에서는 web 기반을 통한 선박기본계산 서비스를 제공함으로서 설계정보들을 웹 브라우저를 통해서 소형선박을 건조하는 조선소나 설계 용역을 담당하는 설계사무소와 같은 원격지에서도 필요한 데이터를 검색할 수 있도록 제시하였다.