• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.377-382
• /
• 1989

암모니아 합성을 위한 다단식급냉반응기를 대상으로 물질 및 에너지보존법칙을 적용하여 수식모델을 전개하였다. 실제 4단 반응기의 설계 및 운전자료를 기준으로 하여 정상상태의 다중성을 해석하고 각 촉매층의 체적비와 반응물의 공급유량비에 대한 최적화 연구를 수행한 결과 실제 조업조건하에서 3개의 서로 다른 정상상태가 존재하며 실제 설계 및 조업조건은 최적조건을 다소 완화한 조건에 상당한 것임을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.625-633
• /
• 2013

Multiple response surface optimization (MRSO) aims at finding a setting of input variables which simultaneously optimizes multiple responses. The minimization of mean squared error (MSE), which consists of the squared bias and variance terms, is an effective way to consider the location and dispersion effects of the responses in MRSO. This approach basically assumes that both the terms have an equal weight. However, they need to be weighted differently depending on a problem situation, for example, in case that they are not of the same importance. This paper proposes to use the weighted MSE (WMSE) criterion instead of the MSE criterion in MRSO to consider an unequal weight situation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.97-105
• /
• 2015

Multiresponse optimization (MRO) seeks to find the setting of input variables, which optimizes the multiple responses simultaneously. The approach of weighted mean squared error (WMSE) minimization for MRO imposes a different weight on the squared bias and variance, which are the two components of the mean squared error (MSE). To date, a weighted sum-based method has been proposed for WMSE minimization. On the other hand, this method has a limitation in that it cannot find the most preferred solution located in a nonconvex region in objective function space. This paper proposes a Tchebycheff metric-based method to overcome the limitations of the weighted sum-based method.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.39-40
• /
• 2007

본 논문은 Slotless BLDCM의 발열특성에 고려하여 열 발생을 최소화 하고자 다중 반응표면법을 적용하여 모터의 형상 및 권선 사양의 최적 선정에 관한 연구이다. 본 연구에서는 전류밀도의 최소화를 목적함수로 하여 형상 및 권선 사양의 최적화를 실시하였다. 변수에 대한 영향도의 분석은 전자계 해석을 통한 결과값을 통하여 실시하였으며, 열적 특성을 파악하기 위해서 전자계-열계의 해석을 통해서 최적값의 열적 안정성을 파악하였다.

• The Korean Journal of Applied Statistics
• /
• v.11 no.2
• /
• pp.451-459
• /
• 1998

The analysis of data from a multiresponse experiment requires careful consideration of the multivariate nature of the data. In a multiresponse sitation, the optimization problem is more complex than in the single response case. The biplot is a graphical tool which make the analyst to understand the correlation of the response variables, the relation of the response variables arid the explanatory variables and the relative importance of the explanatory variables. In case of good fitting of the first order model, we can draw the biplot with the first order experimental design. Otherwise, we can make the biplot with the second order experimental design by adding other experimental points.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.535-541
• /
• 2015

In this study, an approximate multi-objective optimization of a wall-mounted monitor bracket arm was performed. The rotation angle of the bracket arm was determined considering the inplane degree of freedom. We then formulated an optimization problem on maximum stress and deflection. Analyses of mean and design parameters were conducted for sensitivity regarding performance with orthogonal array and response surface method (RSM). RSM models of objective and constraint functions were generated using central composite (CCD) and D-optimal design. The accuracy of approximate models was evaluated through $R^2$ value. The obtained optimal solutions by non-dominant sorting genetic algorithm (NSGA-II) were validated through the finite element analysis and we compared the obtained optimal solution by CCD and D-optimal design.

• Korean Journal of Microbiology
• /
• v.43 no.1
• /
• pp.1-6
• /
• 2007

We describe a multiplex PCR method that can detect and differentiate simultaneously four different kinds of DNA viruses, Epstein-Barr virus (EBV), cytomegalovirus (CMV), hepatitis B virus (HBV) and parvovirus B19 (B19). Primers for the multiplex PCR reaction were designed to amplify specific regions of the EBV (pol), CMV (pol), HBV (pol) and B19 (ns) viral genomes and used to simultaneously detect individual viruses. In order to achieve optimal sensitivity and specificity for multiplex PCR, the thermo-cycling parameters, primer sequences, and concentration of each reaction components were optimized systematically. The sensitivity of the detection method ranged between 5 and 10 copies of viral genome with a mixture of multiple primer pairs. Furthermore, this highly sensitive test showed no cross-reactivity among the four viruses. Thus, the results obtained in this study provide evidence that the assay system is a good tool for supporting the diagnosis of viral infection and contamination.

• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.99-108
• /
• 2022

Among induced polarization (IP) methods, spectral IP (SIP) uses alternating current as a transmission source to measure amplitudes and phase of complex electrical resistivity at each source frequency, which disperse with respect to source frequencies. The frequency dependence, which can be explained by a relaxation model such as Cole-Cole model or equivalent models, is analyzed to estimate SIP parameters from dispersion curves of complex resistivity employing multi-objective optimization (MOO). The estimation uses a generic algorithm to optimize two objective functions minimizing data misfits of amplitude and phase based on Cole-Cole model, which is most widely used to explain IP relaxation effects. The MOO-based estimation properly recovered Cole-Cole model parameters for synthetic examples but hardly fitted for the real laboratory measures ones, which have relatively smaller values of phases (less than about 10 mrad). Discrepancies between scales for data misfits of amplitude and phase, used as parameters of MOO method, and it is in necessity to employ other methods such as machine learning, which can deal with the discrepancies, to estimate SIP parameters from dispersion curves of complex resistivity.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.624-627
• /
• 2010

최근 자동차 업계서는 차량의 온실가스 배출량을 줄이고 연비를 개선시킬 수 있는 방법 중의 하나로 경량화 소재를 사용하여 차체의 중량을 줄이는 연구가 활발히 진행 중에 있다. 특히 알루미늄 합금의 경우 기존 강재에 비해 비중이 낮아 가볍고 부식에 대한 저항성이 높아 많이 사용되어지고 있는 추세이다. 본 연구에서는 먼저, 저입열 용접공정을 적용하여 용접 변수와 토치의 각도에 따른 인장강도 특성을 비교하여 적정 용접 범위를 산정하였으며, 인장강도와 비드형상의 관계를 다중 회귀 분석을 이용하여 비드 예측 회귀 모델을 제시하였다. 또한 호감도 함수를 적용한 반응표면분석법을 이용하여 자동차 생산 현장에서 겹치기 용접 이음부의 강건한 용접 품질을 가질 수 있는 최적용접 공정 조건을 도출할 수 있는 효과적인 방법을 제안하고자 한다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.730-739
• /
• 2005

A common problem encountered in product or process design is the selection of optimal parameter levels which involve simultaneous consideration of multiresponse variables. A multiresponse problem is solved through three major stages: data collection, model building, and optimization. To date, various methods have been proposed for the optimization stage, including the desirability function approach and loss function approach. In this paper, we first propose a framework classifying the existing studies and then propose some promising directions for future research.