• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.100-102
• /
• 2023

최근 오픈 사이언스 문화가 확산됨에 따라 오픈 데이터, 오픈 소스 소프트웨어와 같은 공개된 리소스들을 효율적으로 공유 및 활용하기 위한 방법이 주목을 받고 있다. 본 논문에서는 연구 소프트웨어의 재현성을 향상시키기 위한 국가연구데이터커먼즈(KRDC)를 소개하고 다중 KRDC 클러스터 간 워크플로우 연계 방안을 제안한다. 국가연구데이터커먼즈는 연구 소프트웨어와 분석 환경인 인프라를 결합하여 함께 제공하는 서비스로, 멀티 노드 쿠버네티스(kubernetes) 클러스터를 기반으로 동작한다. 따라서, 서로 다른 KRDC 프레임워크에 존재하는 리소스들을 하나의 워크플로우로 연계하는 것은 복잡한 사용자 인증/인가 문제, 보안 상의 문제를 고려하여야 한다. 본 논문에서는 프록시(proxy) 앱을 사용하는 워크플로우 연계 기능을 제안하고, 이를 지원하기 위한 통합 인증, 인가 체계와 연계 방안을 구현한다. 제안하는 방법을 두 개의 KRDC 프레임워크를 대상으로 적용하여 제안 워크플로우 연계 방법의 유효함을 확인한다. 본 논문에서 제안하는 워크플로우 연계 방법과 시나리오는 실제 멀티 클러스터 연계 방안을 구현한 사례로, KRDC 프레임워크 뿐만 아니라 다양한 쿠버네티스 기반 리소스 연계에 활용할 수 있는 우수한 결과로 사료된다.

• The Korean Journal of Petroleum Geology
• /
• v.5 no.1_2 s.6
• /
• pp.36-47
• /
• 1997

This study presents multi-variable sequence model for a broader application of sequence concept proposed by Exxon group. The concept of the multi-variable model is based on the fact that internal organization and boundary type of the sequences are determined by three varying factors including 3rd-order cycles of eustasy, and tectonic movement and sediment influx with 2nd-order changes. Instead of Exxon group's systems tracts, this model adopts parasequence sets as the fundamental building blocks of the sequence, because they are descriptive stratigraphic units simply defined by internal stacking pattern, reflecting interactions of accommodation and sediment influx. Seven sequence types which vary in number and type of internal parasequence sets are formulated as associations of four types of accommodation development and three grades of sediment influx. In the southwestern margin of Ulleung Basin, the multi-variable sequence analysis of shelf-slope sequence shows systematic changes in stratal patterns and the numbs, of constituent parasequence sets (i.e. sequence type). These changes are interpreted to reflect temporal and spatial changes in type and rate of tectonic movement and sediment influx, as a result of back-arc opening and closing. During the back-arc opening, rapid subsidence, continuous rise of relative sea level, and high sediment influx gave rise to sequences dominantly of single progradational parasequence set. In the early stage of back-arc closing accompanied by local contractional deformation, different types of sequences contemporaneously formed depending on the spatial changes in tectonically-controlled accommodation and influx rates. During the subsequent slow back-arc subsidence, rise-dominated relative sea-level cycle was coupled with moderate to high sedimentation rate to have resulted in sequences consisting of $2~3$ parasequence sets.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.49-60
• /
• 2002

Receive dynamic focusing with an array transducer can provide near optimum resolution only in the vicinity of transmit focal depth. A customary method to increase the depth of field is to combine several beams with different focal depths, with an accompanying decrease in the frame rate. In this Paper. we Present a simultaneous multiple transmit focusing method in which chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in a sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels. and the crossorelation function of any Pair of the signals has values smaller than the sidelobe levels of each autocorrelation function. This means that each chirp signal can be separated from the combined received signals and compressed into a short pulse. which is then individually focused on a separate receive beamformer. Next. the individually focused beams are combined to form a frame of image. Theoretically, any two chirp signals defined over two nonoverlapped frequency bands are mutually orthogonal In the present work. however, a tractional overlap of adjacent frequency bands is permitted to design more chirp signals within a given transducer bandwidth. The elevation of the rosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals We also observe that the Proposed method provides better images when the low frequency chirp is focused at a near Point and the high frequency chirp at a far point along the depth. better lateral resolution is obtained at the far field with reasonable SNR due to the SNR gain in Pulse compression Imaging .

• Korean Journal of Remote Sensing
• /
• v.38 no.6_3
• /
• pp.1827-1836
• /
• 2022

Disasters that occur unexpectedly are difficult to predict. In addition, the scale and damage are increasing compared to the past. Sometimes one disaster can develop into another disaster. Among the four stages of disaster management, search and rescue are carried out in the response stage when an emergency occurs. Therefore, personnel such as firefighters who are put into the scene are put in at a lot of risk. In this respect, in the initial response process at the disaster site, robots are a technology with high potential to reduce damage to human life and property. In addition, Light Detection And Ranging (LiDAR) can acquire a relatively wide range of 3D information using a laser. Due to its high accuracy and precision, it is a very useful sensor when considering the characteristics of a disaster site. Therefore, in this study, development and experiments were conducted so that the robot could perform real-time monitoring at the disaster site. Multi-sensor module was developed by combining LiDAR, Inertial Measurement Unit (IMU) sensor, and computing board. Then, this module was mounted on the robot, and a customized Simultaneous Localization and Mapping (SLAM) algorithm was developed. A method for stably mounting a multi-sensor module to a robot to maintain optimal accuracy at disaster sites was studied. And to check the performance of the module, SLAM was tested inside the disaster building, and various SLAM algorithms and distance comparisons were performed. As a result, PackSLAM developed in this study showed lower error compared to other algorithms, showing the possibility of application in disaster sites. In the future, in order to further enhance usability at disaster sites, various experiments will be conducted by establishing a rough terrain environment with many obstacles.

• Applied Chemistry for Engineering
• /
• v.21 no.1
• /
• pp.29-33
• /
• 2010

In this study, boron, carbon, nitrogen and fluorine co-doped $TiO_{2}$ photocatalysts using tetraethylammonium tetrafluoroborate (TEATFB) have been prepared by different heat treatment temperatures to decrease the band gap. To explore the visible light photocatalytic activity of the novel low‐zband gap $TiO_{2}$ photocatalyst, the removal of two dyes was investigated, namely, acridine orange and rhodamine B. XRD patterns demonstrate that the samples calcined at temperatures up to $800^{\circ}C$ clearly show anatase peaks. The XPS results show that all the doped samples contain N, C, B and F elements and the doped $TiO_{2}$ shows the shift in the band gap transition down to 2.98 eV as UV-DRS results. In these UV-Vis results, photocatalytic activity of the doped $TiO_{2}$ is 1.61 times better than undoped $TiO_{2}$. Specially, excellent photoactivity results were obtained in the case of samples treated at $700^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.77-87
• /
• 2010

Hospital-acquired methicillin-resistant Staphylococcus aureus (MRSA) has been an increasing problem worldwide since the initial reports over 40 years ago. To examine new drug leads with potential antibacterial activities, Various N'-[(-3-substituted-4-oxo-1,3-thiazolidin-2-ylidene]-4-hydroxy benzohydrazide (4a-4.i) and N'-[-(3,4-disubstituted)-1,3-thiazolidin-2ylidene)]-4-hydroxybenzohydrazide from (5.a-5.i) to (10.a-10.i) were synthesized using appropriate synthetic route. The entire test compounds (4.a-4.i) and from (5.a-5.i) to (10.a-10.i) were assayed in vitro against s. aureus strain. The minimum inhibitory concentration (MIC) was determined for test compounds and for reference standards. The test compounds showed significant antibacterial activity against the strains used, when tested in vitro. In general, p-hydroxybenzohydrazide ring and substituted thiazoline ring are essential for antimicrobial activity. Among the compounds tested, compounds 6.f, 7.g, 9.f and 10.f, 10 i were found to be most potent. The test compounds were found nontoxic upto the dose level of 2000 ${\mu}g$/mL. The intact compounds were then subjected for 3D-QSAR studies. 3D-QSAR study based on the principal of alignment of pharmacophoric features by Schrodinger PHASE module. The 3D-QSAR study allowed us to confirm the preferential binding mode of p-hydroxybenzohydrazide inside the active site.

• The KIPS Transactions:PartD
• /
• v.19D no.3
• /
• pp.237-246
• /
• 2012

Although the development of Global Positioning System (GPS) are more and more mature, its accuracy is just acceptable for outdoor positioning, not positioning for the indoor of building and the underpass. For the positioning application area for the indoor of building and the underpass, GPS even cannot achieve that accuracy because of the construction materials while the requirement for accurate positioning in the indoor of building and the underpass, because a space, a person is necessary, may be very small space with several square meters in the indoor of building and the underpass. The Received Signal Strength (RSS) based localization is becoming a good choice especially for the indoor of building and the underpass scenarios where the WiFi signals of IEEE 802.11, Wireless LAN, are available in almost every indoor of building and the underpass. The fundamental requirement of such localization system is to estimate location from Access Point (AP) to mobile device using RSS at a specific location. The Multi-path fading effects in this process make RSS to fluctuate unpredictably, causing uncertainty in localization. To deal with this problem, the combination for the method of Neural Networks and Push-Pull Estimation is applied so that the carried along the devices can learn and make the decision of position using mobile device where it is in the indoor of building and the underpass.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.4
• /
• pp.1006-1031
• /
• 2013

This study investigates the extent to which product innovation is associated with firm performance, and how this effect is moderated by other type of innovation efforts. Empirical analysis is conducted (1) to determine the effect of product innovation on firm performance; (2) to explore the moderating effect that process innovation, organizational innovation and marketing innovation activities each has on the relationship between product innovation and firm performance. The analytical sample comprises a total of 816 Korean manufacturing firms from the 2010 KIS (Korean Innovation Survey) data and merged with financial data from KIS Info for acquiring the objectivity. The results show that product innovation is positively associated with a firm performance. Product innovation when combined with higher levels of process, organizational and marketing innovation activities resulted in higher firm performance. The results suggest that product innovation is a decisive factor of firm performance. More importantly, process, organizational and marketing innovation activities support product innovation and thus impact firm performance indirectly. In addition, this study examines the effect of innovation activities on firm performance by different firm size and R&D intensity, thereby further improving the details of this study.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.39-46
• /
• 2017

This paper presents the fabrication of ceramic insulation layer on metallic heat spreading substrate, i.e. an insulated metal substrate, for planar type heater. Aluminum alloy substrate is preferred as a heat spreading panel due to its high thermal conductivity, machinability and the light weight for the planar type heater which is used at the thermal treatment process of semiconductor device and display component manufacturing. An insulating layer made of ceramic dielectric film that is stable at high temperature has to be coated on the metallic substrate to form a heating element circuit. Two technical issues are raised at the forming of ceramic insulation layer on the metallic substrate; one is delamination and crack between metal and ceramic interface due to their large differences in thermal expansion coefficient, and the other is electrical breakdown due to intrinsic weakness in dielectric or structural defects. In this work, to overcome those problem, selected metal oxide buffer layers were introduced between metal and ceramic layer for mechanical matching, enhancing the adhesion strength, and multi-coating method was applied to improve the film quality and the dielectric breakdown property.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_2
• /
• pp.689-698
• /
• 2017

In this paper, a new classification method based on the combination of semi-supervised learning with spatial similarity of adjacent pixels is presented for crop classification in inaccessible areas. Iterative classification based on semi-supervised learning is applied to extract reliable training data from both the initial classification result with a small number of training data, and classification results of adjacent pixels are also considered to extract new training pixels with less uncertainty. To evaluate the applicability of the proposed method, a case study of the classification of field crops was carried out using multi-temporal Landsat-8 OLI acquired in the Daehongdan region, North Korea. From a case study, the misclassification of crops and forests, and isolated pixels in the initial classification result were greatly reduced by applying the proposed semi-supervised learning method. In addition, the combination of classification results of adjacent pixels for the extraction of new training data led to the great reduction of both misclassification results and isolated pixels, compared to the initial classification and traditional semi-supervised learning results. Therefore, it is expected that the proposed method would be effectively applied to classify areas in which it is difficult to collect sufficient training data.