• The Transactions of the Korea Information Processing Society
• /
• v.4 no.10
• /
• pp.2562-2570
• /
• 1997

This paper deals with the design and performance of the adaptive equalizer using high order statistics in order to improve the transmission characteristics of multipath fading channel. The multipath propagational phenomenon occurred in digital radio transmission causes the distortion and ISI of receiving signal. These are main reasons to increase the bit error rate and degrade the performance of receivers. In this paper, the adaptive equalization algorithm using high order statistics of received signal is used instead of CMA algorithm, Bussgang and Godard which are known widely. The performance of this algorithm (residualisi, recovered constellation, calculation) is presented varing SNR. As the result of the computer simulation, equalizer algorithm using high order statistics is better than CMA in the range of low SNR, $10{\sim}20dB$. Therefore, considering the actual communication systems which use the range of $14{\sim}20$ SNR, the adaptive equalizer using high order statistics can be used in the real multipath fading environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10C
• /
• pp.995-1006
• /
• 2003

It is well know that in the wireless communication systems the transmitted signals can suffer from multipath fading due to the wave propagation characteristics and the obstacles over the paths, resulting in serious reduction in the power of the received signals. However, it is possible to take advantage of the inherent diversity imposed in the multipath reception if the underlying channel can be properly estimated. One of the diversity reception methods in this case is Rake processing. In this paper we study the Rake receivers for the direct-sequence spread-spectrum communication systems utilizing PN (pseudo noise) sequences to achieve spread spectrum. A conventional Rake receiver can use the finite-duration impulse (FIR) filter followed by the PN sequence demodulator, where the FIR filter coefficients are the reverse-ordered complex conjugate values of the fading channel impulse response estimates. Here, we propose a new Rake processing method by replacing the aforementioned PN code sequence with a new set of optimum demodulator coefficients. More specifically, the concept of the new optimum Rake processing is first introduced and then the optimum demodulator coefficients are theoretically derived. The performance obtained using the new optimum Rake processing is also calculated. The analytical results are verified by computer simulation. As a result, it is shown that the new optimum Rake processing method improves the MSE performance more than 10 dB over the conventional one using the fixed PN sequence demodulator. It is also shown that the new optimum Rake processing method improves the MSE performance about 10 dB over the Adaptive Correlator that performs the combining of the multipath components and PN demodulation concurrently. And finally, the MSE performance of the optimum Rake demodulator is very close to the MSE performance of OPSK demodulator under the AWGN channel.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.2
• /
• pp.95-103
• /
• 2013

An underwater acoustic (UWA) communication in shallow water is strongly affected by the water surface and the seabed acoustical properties. Every reflected signal to receiver experiences a time-variant scattering in sea surface roughness and a grazing-angle-dependent reflection loss in bottom. Consequently, the performance of UWA communication systems is degraded, and high-speed digital communication is disrupted. If there is a dominant signal path such as a direct path, the received signal is modeled statistically as Rice fading but if not, it is modeled as Rayleigh fading. However, it has been known to be very difficult to reproduce the statistical estimation by real experimental evaluation in the sea. To give an insight for this scattering and grazing-angle-dependent bottom reflection loss effect in UWA communication, authors conduct experiments to quantify these effects. The image is transmitted using binary frequency shift keying (BFSK) modulation. The quality of the received image is shown to be affected by water surface scattering and grazing-angle-dependent bottom reflection loss. The analysis is based on the transmitter to receiver range and the receiver depth dependent image quality and bit error rate (BER). The results show that the received image quality is highly dependent on the transmitter-receiver range and receiver depth which characterizes the channel coherence bandwidth.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.880-883
• /
• 2002

In this paper, we propose the synchronization recovery algorithm which is suitable to wireless multimedia of wireless channel situation which is being used OFDM signaling method. The basic of the suggested clock synchronization. restoration Algorithm is to getting the shock response of channel or getting the multipath strength profile through IFFT after the getting the frequency, response of deducted channel from channel deductor of receiver and to trace the location in the channel energy concentrated area of timing area. And it also analysis the start point of 64-QAM and 16-QAM if the sampling clock offset has the sample of $\pm$1-3, and we identified the occurance of performance deterioration when occures more than 2 samples of offset to compare with star point and BER performance in optimum sampling point result of BER performance checking, and we know that the recovery algorithm proposed algorithm also provide excellent synchronization characteries under frequency, selecting fading channel as result of simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.179-186
• /
• 2008

In proportion as the growth of the wireless sensor network applications, we need for more accuracy wireless channel information. In the case of indoor or outdoor wireless sensor networks, multipath propagation causes severe problems in terms of fading. Therefore, a path-loss model for multipath environment is required to optimize communication systems. This paper deals with log-normal path loss modeling of the indoor 2.4 GHz channel. We measured variation of the received signal strength between the sender and receiver of which separation was increased from 1 to 30m. The path-loss exponent and the standard deviation of wireless channel were determined by fitting of the measured data. By using the PRR(Packet Reception Rate) of this model. Wireless sensor channel is defined CR(Connect Region), DR(Disconnected Region). In order to verify the characteristics of wireless channel, we performed simulations and experiments. We demonstrated that connection ranges are 24m in indoor, and 14m in outdoor.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.373-383
• /
• 2012

The performance of underwater acoustic communication system is sensitive to the Doppler shift and ISI(Inter-Symbol Interference). Therefore, the simulation algorithm needs to consider time-spread due to multipath arrivals which cause the ISI, and time-varying Doppler shift along with moving source and receiver. For this purpose, VirTEX(Virtual Time series EXperiment) based on Ray model has been developed. In this paper, VirTEX is used to compare the characteristics of ocean waveguide from the experimental data and illustrate the performance. The CIR(Channel Impulse Response) that characterizes the multipath arrivals with representative time-spread due to multipath arrivals is compared between numerically simulated and experimental probe signal. Also, the communication performance analysis for BER(Bit Error Rate) is compared between numerically simulated and experimental data signal. As a result, VirTEX can be useful as a simulation tool for evaluating the performance of underwater acoustic communication system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.352-361
• /
• 2000

The performance of a multi-carrier CDMA system is analyzed considering frequency selective multipath fading and Near/Far effects. The number of multicarrier, multiuser, and arms of RAKE receiver, and the decay ratio of frequency selective multipath fading are used as a parameter for the performance analysis. More over, the distribution and the strength of multiuser interference are also considered. To evaluate the Near/Far effects in a multi-carrier CDMA system, three distribution models are assumed. In the first model, interference to carrier Ratio, I/C, ranges from -4 dB to 4dB, and at each 2 dB interval, 20 % of multiuser is assumed to be uniformly distributed. In the second one, I/C ranges from -2 dB to 2 dB, and 33.3% of multiuser is assumed to be equally dispersed at each 2dB interval. The third model is 0 dB of I/C, that is, with perfect power control, multiuser are assumed to be evenly located. In this paper, multi-carrier CDMA system adoption RAKE receiver is proposed to mitigate the frequency selective multipath fading. From the results, the third model(i.e. perfect power control) shows the best performance, and the narrower range of I/C causes the less effects to the desired signal, which reads to the better performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.492-499
• /
• 2002

Performance analysis and comparison of the hybrid DS-SFH spread-spectrum (SS) system using coherent MSK and QPSK modulation techniques over Rayleigh fading channel are considered in the presence of MTJ(multi-tone jamming). To analyze the BER performance of the hybrid systems with or without the Rake receiver, signal-to-noise plus interference ratio is derived as a function of the average signal-to-noise ratio, the jammer-to-signal ratio and other system parameters. Numerical results show that the performance difference between the two modulation schemes, MSK and QPSK, is negligible for low JSR, while it becomes significant with the increase of JSR. In multi-path Rayleigh fading channel without Rake receiver, the performances of the two modulation schemes are slightly improved as the DS spreading gain is increased when the total SS bandwidth is fixed. In particular, there is an optimum DS spreading gain for large JSR, in which a minimum BER is achieved, while only DS spreading gives the best performance for small JSR. For hybrid systems with Rake receiver, it is shown that the hybrid system of the MSK modulation scheme provides better anti-jamming performance and larger performance improvement with the increase of multi-path resolution capability of Rake receiver than that of QPSK modulation for all conditions.

• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.86-96
• /
• 2011

In this paper we propose a Pre-rake system applied with a frequency domain equalizer in TDD/CDMA multi-code transmission. The Pre-rake system has been well known technique in TDD/CDMA to make a receiver simple. However, it still has residual losses of path diversity and signal to noise ratio (SNR). However, gathering all the residual paths demands an additional hardware such as a rake combiner at the receiver. For the reason Pre/Post-rake system has already been proposed at up/downlink correlated channel conditionunder the assumption of noisier channel. There is a trade-off between the first purpose of Pre-rake that makes hardware simple at the receiver and the performance improvement. From the point the frequency domain equalizer (FDE) can be considered in Pre/Post-rake to supply the receiver with the flexible equalizing methods with rather reduced complexity compared with time domain rake combiner or equalizers. Pre-rake itself increases the number of multipath, which results from the convolution of Pre-rake filter and wireless channel, and FDE must be well matched to Pre/Post-rake, while it considers the relationship of hardware complexity and the performance. In this paper, the Pre-rake/Post-FDE system is introduced at TDD/CDMA multi-code transmission. In addition, the cyclic prefix reduction method in the proposed system is introduced, and the theoretical analysis to the proposed system is given by assuming Gaussian approximation, and finally the numerical simulation results are provided.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.331-341
• /
• 2002

It is expected that the SCM (Subcarrier Multiplexing) optical link system, in which a number of small scale base stations with only antenna and RF transceiver are connected to central station through optical fiber, is in demand. In order to analyze the performance of SCM optical link system fur RF signal transmission, MZ(Mach-Zehnder) modulator's transfer function is modelled as nonlinear form with the cube of input signal. And considering the multiple access interferences occurred In the demodulation of other users'CDMA signals with multipath components after passing through MZ modulator, the BER performance is analyzed.