• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.6
• /
• pp.725-730
• /
• 2007

Gray-level histogram-based threshold selection methods such as Otsu's method, Huang and Wang's method, and etc. have been widely used for the threshold selection in image processing. They are simple and effective, but take too much time to determine the optimal multilevel threshold values as the number of thresholds are increased. In this paper, we measure correlation between gray-levels by using the Gaussian function and define a Gaussian-type finite mixture distribution which is combination of the Gaussian distribution function with the gray-level histogram, and propose a fast and effective threshold selection method using it. We show the effectiveness of the proposed through experimental results applied it to three images and the efficiency though comparison of the computational complexity of the proposed with that of Otsu's method.

• Journal of the Korea Society for Simulation
• /
• v.25 no.3
• /
• pp.15-28
• /
• 2016

It is necessary to analyze underwater acoustics channel(UAC) modeling and simulation for underwater weapon system development and acquisition. In order to analyze UAC, there are underwater acoustics propagation numerical analysis models(Ray theory, Parabolic equation, Normal-mode, Wavenumber integration). However, If these models are used for multiple frequency signal analysis, they are inaccurate to calculate result of analysis effectiveness and restricted for signal processing and analysis. In this paper, to overcome this problem, we propose simple/multiple frequency signal analysis model of the Pseudospectral Time-Domain Method synthetic environment UAC applied to underwater environment noise model as like as realistic underwater environment. In order to confirm the validation of the model, we performed the 9 scenarios simulation(4 scenarios of single frequency signal, 4 scenarios of multiple frequency signal, 1 scenario of single/multiple frequency signal like submarine radiated noise) for validation and confirmed the validation of this model through the simulation model.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.39-40
• /
• 2007

본 논문은 Slotless BLDCM의 발열특성에 고려하여 열 발생을 최소화 하고자 다중 반응표면법을 적용하여 모터의 형상 및 권선 사양의 최적 선정에 관한 연구이다. 본 연구에서는 전류밀도의 최소화를 목적함수로 하여 형상 및 권선 사양의 최적화를 실시하였다. 변수에 대한 영향도의 분석은 전자계 해석을 통한 결과값을 통하여 실시하였으며, 열적 특성을 파악하기 위해서 전자계-열계의 해석을 통해서 최적값의 열적 안정성을 파악하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.13-15
• /
• 2001

최근에 이르러 프로세서의 병렬성을 분석적 기법으로 예측하기 위한 연구가 활발해지면서 프로세서의 성능 예측 모델에 대한중요성이 대두되고 있다. 그러나 기존의 연구는 현재 광범위하게 사용되고 있는 다중 분기 예측법을 이용하는 프로세서에 대하여 분기 차수와 관계없는 재귀적 성능 모델을 제공해주지 않는다. 본 논문에서는 이것을 해결하기 위하여, 매 싸이클마다 명령어 종속 트리를 구성하고 종속인 명령어 간에 상대적인 병렬도 갓을 부여하여 성능 예측 모델 입력 데이타를 측정하였다. 그 곁과, 다중 분기 예측법을 사용하는 프로세서에서 정수형 프로그램에 대한 성능을 기존의 성능모델보다 작은 상대 오차로 예측할 수 있다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.652-654
• /
• 2000

점진적 메쉐 표현법은 2-다양체 성질을 가지는 임의의 삼각메쉬에 대한 다중해상표현이 가능한 방법으로, 최근 다중해상 모델링 및 렌더링 분야로 그 응용범위를 넓혀가고 있다. 본 논문에서는 점진적 메쉬의 선택적 세분화를 위한 새로운 방법을 제안한다. 제안하는 방법은 기존방법[4,3]과는 달리 거의 대부분의 경우 한 정점의 세분화로 인해 주위 정점이 세분화되지 않는 최적화된 방법이다. 본 논문에서 제안하는 새로운 선택적 세분화방법으로 인해 점진적 메쉬의 활용분야가 더욱 넓어질 것으로 기대된다.

• The Korean Journal of Applied Statistics
• /
• v.32 no.4
• /
• pp.561-572
• /
• 2019

We study false discovery rate segmentation (FDRSeg) and simultaneous multiscale change-point estimator (SMUCE) methods for multiscale multiple change-point estimation, and compare empirical behavior via simulation. FSRSeg is based on the control of a false discovery rate while SMUCE used for the multiscale local likelihood ratio tests. FDRSeg seems to work best if the number of change-points is large; however, FDRSeg and SMUCE methods can both provide similar estimation results when there are only a small number of change-points. As a real data application, multiple change-points estimation is done with the well-log data.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.123-131
• /
• 2016

To capture color and near-infrared images simultaneously, a multi-spectral filter array(MSFA) sensor is used. This is because an NIR band gives additional invisible information to human eyes to see subject under extremely low light level. However, because lenses have different refractive indices for different wavelengths, lenses may fail to focus widely different rays to the same convergence point. This is why a chromatic aberration(CA) problem occurs and images are degraded. In this paper, the image restoration algorithm for an MSFA image, which removes the CA problem, is presented. The obtained MSFA image is filtered by the estimated low-pass kernel to generate a base image. This base image is used to remove CA problem in multi-spectral(MS) images. By modeling the image degradation process and by using the least squares approach of the difference between the high-frequencies of the base and MS images, the desired high-resolution MS images are reconstructed. The experimental results show that the proposed algorithm performs well in estimating the high-quality MS images and reducing the chromatic aberration problem.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.378-378
• /
• 2023

본 연구에서는 한반도 전지역의 격자화를 통해 다중유역에 대한 유출량 모의 능력 평가를 제시하고자 한다. 이를 위해 기상청에서 제공하는 ASOS(종관기상관측) 자료를 IDW(Inverse Distance Weighting) 보간법으로 격자화하였고, GIS(Geographic Information System)를 활용하여 지형자료를 격자에 맞추어 구축하였다. 이렇게 구축한 자료를 사용하여 다중유역의 유출량을 Variable Infiltration Capacity(VIC) 모형으로 모의하였다. VIC 모형은 토양, 식생 및 대기 사이의 물과 에너지의 물리적 교환을 모의하는 동시에 식생 다양성, 가변 침투가 있는 다중 토양층 및 비선형 기반 흐름을 고려하는 모형이다. 이러한 모형을 다중유역에 대해 전역 매개변수를 추정하였고 총 26개의 다중관측지점에서 일별 유출량을 모의하였다. 모의된 유출량은 NSE(Nash-Sutcliffe Efficiency)를 통해 평가하였다. 본 연구에서 구축한 대규모 수문모형은 향후 우리나라의 다양한 수자원 관리(Water resources management)에 활용될 수 있을 것이다.

• The KIPS Transactions:PartB
• /
• v.19B no.4
• /
• pp.209-220
• /
• 2012

In this paper, we propose an adaptive pavement region detection method that is robust to changes of structural patterns in a natural scene. In order to segment out a pavement reliably, we propose two step approaches. We first detect the borderline of a pavement and separate out the candidate region of a pavement using VRays. The VRays are straight lines starting from a vanishing point. They split out the candidate region that includes the pavement in a radial shape. Once the candidate region is found, we next employ the adaptive multi-seed region growing(A-MSRG) method within the candidate region. The A-MSRG method segments out the pavement region very accurately by growing seed regions. The number of seed regions are to be determined adaptively depending on the encountered situation. We prove the effectiveness of our approach by comparing its performance against the performances of seed region growing(SRG) approach and multi-seed region growing(MSRG) approach in terms of the false detection rate.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.201-208
• /
• 2016

Recently, extensive research on crack analysis using extended finite element method(XFEM) which has main advantages in element re-meshing and visualization of cracks has been conducted. However, its application was restricted to the members of a single material. In this study, the applicability and feasibility of the XFEM to the multiple crack analysis of reinforced concrete beams were demonstrated. ABAQUS which has implemented XFEM was used for the crack analysis and its results were compared with test results. Enriched degree-of-freedom locking phenomenon was discovered and its causes and the ways to prevent it were suggested. The locking occurs when cracks in the adjacent elements simultaneously develop. A modelling technique for multiple cracking similar to test results was also proposed. The analysis with XFEM showed similar results to the tests in terms of crack patterns, spacing of cracks, and load-deflection relationship.