• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.7 s.361
• /
• pp.7-11
• /
• 2007

This paper presents a multiband octa-phase LC VCO for SDR receiver. Four identical LC VCOs are connected by using series coupling transistor to obtain the octa-phase signal and low phase noise characteristic. For a multiband application, a band tuning circuit that consists of a switch capacitor circuit and two MOS varactors is proposed. As the MOS switch is on/off state, the frequency range will be varied. In addition, two varactors make the VCO be immune to process variation of the oscillation frequency. The VCO is designed in 0.18-um CMOS technology, consumes 12mA current from 1.8V supply voltage and operates with a frequency band from 885MHz to 1.342GHz (41% tuning range). As driving sub-harmonic mixer, the proposed VCO covers 3 standards(CDMA 2000 1x, WCDMA, WiBro). The measured phase noise is -105dBc@100kHz, -115dBc@1MHz, -130dBc@10MHz for CDMA 2000 1x, WCDMA, WiBro respectively.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.238-244
• /
• 2013

For musical genre classification, various types of feature vectors are utilized. Mel-frequency cepstral coefficient (MFCC), decorrelated filter bank (DFB), and octave-based spectral contrast (OSC) are widely used as short-term features, and their long-term variations are also utilized. In this paper, OSC features are extracted not only in the single-octave band domain, but also in the multiple-octave band one to capture the correlation between octave bands. As a baseline system, we select the genre classification system that won the fourth place in the 2012 music information retrieval evaluation exchange (MIREX) contest. By applying the OSC features based on multiple-octave bands, we obtain the better classification accuracy by 0.40% and 3.15% for the GTZAN and Ballroom databases, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.102-109
• /
• 2016

This paper proposes a noise suppression method through SNR (Singal-to Noise Ratio) estimation in the two microphone array environment of close spacing. The conventional method uses a noise suppression method for a gain function obtained through the SNR estimation based on coherence function from full band. However, this method cause performance decreased by the noise damage that affects all the feature vector component. So, we propose a noise suppression method that allocates a frequency domain signal into N constant multi frequency band and each frequency band gets a gain function through SNR estimation based on coherence function. Performance evaluation of the proposed method is shown by comparison with PESQ (Perceptual Evaluation of Speech Quality) value which is an objective quality evaluation method provided by the ITU-T (International Telecommunications Union Telecommunication).

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.151-156
• /
• 2003

본 연구에서는 2000년 LANDSAT ETM+ 수도권 영상을 이용하여 도시지역 10개소, 식생지역 10개소를 선정해서 각각에 대해 표준화 주성분 분석을 적용하여 두 지역간의 고유벡터 매트릭스를 비교ㆍ분석해보았다. 도시 지역과 식생 지역각각에 대해 총 6개의 주성분이 생성되었으며 PC-2와 고유벡터 부호가 변한 밴드(band2, band7)를 RGB로 조합하여 수원지역을 대상으로 분류(Classification)한 결과의 정확도를 분광서명 분별 분석(Signature Separability Analysis)통해 얻은 밴드조합(band1, band3, band5) 영상의 분류결과와 비교해 보았다. 수원지역 2000년 IKONOS 영상의 다중분광 밴드(4×4m)와 전정색 밴드(1x1m)를 융합한 영상이 분류 정확도를 판단하는 기준으로 사용되었다. 비교결과 분류 전체 정확도는 각각 87.7%, 77.29% Khat 지수는 0.83, 0.68로 나타나 PC-2, 밴드2, 밴드7을 이용했을 때 분류 정확도를 높일 수 있다는 결과를 얻었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.474-476
• /
• 2009

In the radio communication, such as echo cancellation and channel equalization, adaptive filtering is very practical. Its convergence behavior that is used for updating the weights depends on the correlation of the input signal and length of adaptive filter. Highly correlated input and long length of adaptive filter deteriorate the convergence behavior. To solve this problem, recently, subband affine projection algorithm which pre-whiten the correlation of the input and update the weights in subband structure has been presented. This paper presents convergence analysis method of multiple constrained subband affine projection algorithm.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.295-296
• /
• 2009

다중 브래그 파장의 안정성 확보하고 제작비용을 줄이기 위하여 본 연구에서는 하나의 위상마스크와 스텝당 0.004도의 분해능을 갖는 탤봇 간섭계(Talbot Interferometer)로 이루어진 홀로그래픽 격자제작장치를 구성하였다. C-밴드와 L-밴드 파장 범위 내의 다중 브래그 파장 특성을 실험적으로 확인하고, 이 방법을 사용하여 서로 다른 파장의 브래그 격자를 센서부로 두고, $1{\times}6$ 광분배기와 결합시켜 화학반응조 내의 액체 온도를 측정하는 시스템을 제작하였다.

• Photonics industry news
• /
• s.27
• /
• pp.58-65
• /
• 2005

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.4
• /
• pp.377-387
• /
• 2016

Design of X-band frequency FMCW based imaging radar with multi-resolutions and performances of the self-manufactured radar system are presented in this study. In order to implement the multi-bandwidths, a ramp sequence of the FMCW signal is consisting of two kinds of 'saw-tooth' waveform with different bandwidth, and a receiver circuit consisting of L-band source and frequency converter circuit is used to effectively extract spectra of beat-frequency from the received signal of X-band frequency. The system setups for performance measurement of self-manufactured radar system are maximum output power of 35 dBm, sampling frequency of 1.2 MHz and sweep time of 1 ms. Then, the measured resolutions of the modulated signal having bandwidth of 500 MHz and 300 MHz in range & azimuth-direction are (0.28 m, 0.26 m) and (0.44 m, 0.27 m), respectively.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.94-101
• /
• 2000

In this paper, a multi-channel active noise control(ANC) system using subband hybrid control techniques is proposed. Subband techniques could reduce computational burden and improve the performance of ANC systems by dividing several frequency subband and adjusting adaptive filter coefficients. So it can effectively cancel noises at wanted frequency range and use lower order adaptive filter than the existing algorithms. The adjoint LMS algorithm, which prefilter the error signals instead of the divided reference signals in frequency band, is also used for adaptive filter algorithms to reduce the computational burden of the subband adaptive systems. To improve performance of the ANC system, a weighted hybrid control technique, which has weightily properties of feedforward control systems and feedback control systems, is applied. This algorithm shows higher stability and good noise attenuation property in broad band ANC systems. Computer simulations were performed to show the effectiveness of the proposed algorithm.

• Information and Communications Magazine
• /
• v.19 no.10
• /
• pp.78-92
• /
• 2002

고용량 파장다중분할(WDM) 전송 시스템의 수요가 폭발적으로 증가함에 따라 기존의 erbium-doped fiber amplifiers(EDFA)가 제공하는 이득 대역을 넘어서는 대역폭의 광증폭기의 개발이 촉진되고 있다. 에르븀 이외의 새로운 회토류 첨가물을 사용한 증폭기와 광섬유 내에서의 비선형 현상인 라만 산란에 의한 라만 증폭기에 집중적인 연구가 그 예라 하겠다. 최근 몇 년간의 집중적인 연구를 통하여 현재의 광대역 광 증폭기는 기존의 EDFA(C 벤드 EDFA)가 제공하는 광이득대역의 4∼5배 정도를 쉽게 제공할 수 있다. 이러한 목적을 가지고 통신시장에서 사용될 수 있는 1500nm 근처 대역의 증폭에 대한 세가지의 증폭 기술이 연구되고 있다. 우선, S+밴드(1450-1480nm)와 S밴드(1480-1530nm)의 증폭을 위한 thulium-doped fluoride fiber amplifiers(TDFFA), C 밴드(1530-1560nm)와 L 밴드(1570-1610nm)를 위한 EDFA, 그리고 마지막으로 100nm 이상의 이득대역과 S+에서 L밴드까지 증폭파장대역의 선택이 자유로운 라만 증폭기가 있다. 또한 위의 세 기술을 직렬 또는 병렬로 조합하여 사용하는 증폭기가 있다. 이러한 증폭기 모두에 대해서 실험적인 보고는 많이 있었으나, 내부의 에너지 준위가 복잡하여 증폭 기제가 복잡하고, 실험 파라미터를 측정하기가 어려워서 광대역증폭기의 성능을 예측하기 어려운 점이 있었다. 게다가 이러한 상황에서 광대역증폭기에 대한 해석적이거나 수치해석적인 심도깊은 연구가 부족하여 앞으로 증폭기를 다양하게 응용하기 위한 성능의 예측이 어려울 것으로 보인다. 이는 광대역 증폭기 기반의 전송 시스템을 성공적으로 적용하는데 제한을 줄 것이다. 따라서 본 논문에서는 광대역 증폭기(C/L밴드 EDFA, 라만 증폭기, TDFA)에 대한 실험적인 분석뿐만 아니라 해석적, 수치해석적인 분석 방법까지 그 응용의 예와 함께 소개할 것이다.