• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.1050-1055
• /
• 2010

In this paper, the K band $3{\times}6$ array antenna having unequal input is presented. To control the input impedance of the patch antenna, the length of inset feed is adjusted. Also, the same current in each element is excited by Kirchhoff's law. The proposed unequal impedance array antenna is a nonuniform amplitude array. The bandwidth of the proposed unequal impedance array antenna is wider by 1.5 times than that of the equal array antenna. This broad bandwidth is thought to be due to multiple resonances of patches. The unequal impedance array antennas have fractional bandwidths of 5.07 % and gains of 18.32 dBi.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.120-127
• /
• 2000

In this paper, we propose multispectral image compression using classified interband prediction and vector quantization in wavelet domain. This method classifies each region considering reflection characteristics of each band in image data. In wavelet domain, we perform the classified intraband VQ to remove intraband redundancy for a reference band image that has the lowest spatial variance and the best correlation with other band. And in wavelet domain, we perform the classifled interband prediction to remove interband redundancy for the remaining bands. Then error wavelet coefficients between original image and predicted image are intraband vector quantized to reduce prediction error. Experiments on remotely sensed satellite image show that coding efficiency of theproposed method is better than that of the conventional method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.378-378
• /
• 2011

본 연구에서는 ZnO 나노선 기판을 제작하여 그 위에 밴드갭이 낮은 물질인 CdS, CdSe를 증착시킨 후 p-type 반도체 물질인 CuSCN을 증착시켜 안정성이 향상된 양자점 감응형 태양전지를 제작하였다. ZnO 나노선 기판은 투명한 FTO 기판 위에 ZnO를 진공증착시켜 seed layer를 제작하고 그 위에 $10{\mu}m$정도의 길이의 나노와이어를 성장시킨 후, 밴드갭이 낮은 CdS, CdSe 물질과의 다중접합을 이용하여 제작하고, 이러한 나노선 구조위에 chemical solution deposition을 이용하여 ${\beta}$-CuSCN을 형성시켰다. 양자점 감응형 태양전지는 ZnO 나노선을 photoanode로 이용하고 ZnO 나노선은 암모니아수와 아연염을 이용한, 비교적 저온의 수열합성법을 통해 합성하였고, sensitizer로 쓰인 CdS, CdSe 물질은 CBD방식을 통하여 합성된 나노선 위에 in-situ로 접합시켰다. 또한, 기존의 액체전해질을 이용한 양자점 감응형 태양전지의 안정성을 향상시키기 위해 p-type의 반도체 물질인 CuSCN물질을 propyl sulfide를 이용, ${\sim}80^{\circ}C$의 열을 가하여 in-situ 방식으로 다공성 구조에 효율적으로 접합이 가능하도록 deposition하였다. 일반적으로, CuSCN film은 홀 전도체로서의 장점을 지닌 반면, 전도성이 낮은 단점이 있기 때문에 이를 향상시키기 위해서 첨가제를 이용, 농도에 따라서 전도도가 향상되고 셀의 성능이 향상되는 것을 확인하였다. 이와 같이 합성된 구조는 주사전자현미경(SEM), X-선 회절(XRD), 솔라시뮬레이터 등의 분석장비를 이용하여 태양전지로서의 특성을 분석하였다. 또한 안정성 평가를 위하여 시간에 따른 셀의 특성변화도 비교하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.455-458
• /
• 2005

옴니(omnidirectional)-PBG(photonic bandgap)의 크기는 쌍을 이루는 광자결정 재료의 고유 굴절률, 충진율 및 두께에 의해 결정되는 것이 일반적이다. 그러나 광자결정체가 다중주기를 가지도록 제작하면 옴니-PBG의 크기를 변화 시킬 수 있다. 본 연구에서는 Si/$SiO_2$를 기본 구조로 하는 광대역 옴니-PBG용 광자결정 구조를 설계, 제작하고 그 특성을 평가 하였다. 각각 단일 주기 $\Lambda_1$(426.9nm) 및 $\Lambda_2$(306.9nm)를 갖는 8N-Si/$SiO_2$ 광자결정에 대해 TE/TM-편광광 $5^{\circ}$ 및 $45^{\circ}$ 입사각에 대한 반사-스펙트라 측정결과는 설계값과 일치하였다. 특히 이중주기 $(8N\cdot{\Lambda}_1+8N\cdot{\Lambda}_2)$를 갖도록 제작된 Si/$SiO_2$ 광자결정은 입사각 $5^{\circ}$의 TE-편광광 반사-스펙트라 측정결과, 약 1050-2500nm의 광대역 파장범위에서 광자 밴드 갭을 보였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1645-1653
• /
• 2014

In general, RGB, NIR, and thermal images are used for obtaining geospatial data. Such multiband images are collected via devices mounted on satellites or manned flights, but do not always meet users' expectations, due to issues associated with temporal resolution, costs, spatial resolution, and effects of clouds. We believe high-resolution, multiband images can be obtained at desired time points and intervals, by developing a payload suitable for a low-altitude, auto-piloted UAV. To achieve this, this study first established a low-cost, high-resolution multiband image collection system through developing a sensor and a payload, and collected geo-referencing data, as well as RGB, NIR and thermal images by using the system. We were able to obtain a 0.181m horizontal deviation and 0.203m vertical deviation, after analyzing the positional accuracy of points based on ortho mosaic images using the collected RGB images. Since this meets the required level of spatial accuracy that allows production of maps at a scale of 1:1,000~5,000 and also remote sensing over small areas, we successfully validated that the payload was highly utilizable.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.5
• /
• pp.418-429
• /
• 1996

The number of bits per message and the number of tones in the frequency-hopping sequence are determined by the available bandwidth and the data rate of each user. These parameters in turn determine the tone duration which strongly influences the vulnerability of the system to transmission distortions. In this paper, an address code which is assigned to each individual user was employed in order to reduce the collisions or hit. Also the frequency band is divided into several subbands and each user transmits multitone frequency per subband per chip. And the new system which is to increase the duration of each tone by increasing the total number of system frequencies that has been proposed. It is found that an optimum value bit, tone, number of frequencies per chirp can improve the err performance. This flexibility slightly increases maximum efficiecy and makes the the system less vulnerable to multipath delay. So, It is found that as the nuber of user increased 50%, the efficiency as a tuncion of the bandwidth to user'rate ratio improve 20%.

• Korean Journal of Remote Sensing
• /
• v.27 no.1
• /
• pp.9-15
• /
• 2011

Since PAN(panchromatic) and MS(multispectral) imagery of pushbroom scanner have the offset between PAN and MS CCD(charge coupled device) in the focal plane, PAN and MS images are acquired at different time and angle. Since clouds are fast moving objects, they should lead mis-registration problem with wrong matching points on clouds. The registration of cloudy imagery to recognize and remove the contamination of clouds can be categorized into three classes: (1) cloud is considered as nose and removed (2) employing multi-spectral imagery (3) using multi-temporal imagery. In this paper, method (1) and (3) are implemented and analysed with cloudy pushbroom scanner images.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.89-95
• /
• 2017

UFMC is known as a candidate for the 5G wireless communication system because it is robust against ICI and better performs in asynchronous situation than OFDM. In the UFMC system, the filtering is performed for each subband so the performance of the filter is very important. The Dolph-Chebyshev filter has been used in conventional UFMC system because of its small out-of-band radiation. However it has distortion in the sub-band and skirt characteristics is not good enough. Therefore, it is necessary to study a new type of UFMC filter which reduces the distortion in the subband and has sharp skirt characteristics. In this paper we analyze the effect of filter frequency response in UFMC system and suggest the wavelet based type of filter that substitutes the Dolph-ChebyShev filter used in the conventional UFMC system. The simulation results show that wavelet filter has better BER performance in multipath fading channels than conventional filters.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.9
• /
• pp.11-23
• /
• 2000

Multicarrier DS-CDMA is an effective approach to realize wideband CDMA system in a multipath fading channel. In this paper, we propose a convolutionally-coded overlapped multicarrier DS-CDMA system, and analyze the performance with subband overlapping variation to determine the overlapping percentage showing best performance. Given a total number of subcarriers M*R, we will show that the BER variation is highly dependent on the rolloff factor P of raised-cosine chip wave-shaping filter irrespective of convolutional encoding rate I/M and repetition coding rate 1/R. We also analyze the possibility of reduction in total MUI by considering both variation of a rolloff factor (0 ($\beta$ :1) and variation of subband overlapping factor (0 ( A :2), and show that the proposed system may outperform the multicarrier DS-CDMA system in [1, 12].

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.526-528
• /
• 2005

파장 분할 다중화 방식 (WDM)의 광통신은 중앙 기지국에서 각 가입자에게 서로 다른 파장을 할당하여 동시에 데이터를 전송하는 방식으로서 각 가입자는 할당된 파장을 이용하여 항상 데이터를 송/수신할 수 있고 각 가입자에게 대용량의 데이터를 전송할 수 있을 뿐만 아니라 통신의 보안성이 뛰어나고 성능 향상이 용이하다 따라서 상, 하향(양방향, bidirectional) 3 파장 WDM-필터 소자(Flat band-path filter)는 광 가입자망 구축에서 통신 방송을 융합한 양방향 고화질 멀티미디어 서비스 사업에 반드시 필요로 하는 원천 부품이다. 본 연구에서는 1차원 광자결정을 이용한 저 손실 양방향 3 파장 WDM-필터를 얻을 수 있는 이론적 모델을 설계하고 그에 따라 2-cavity $Ta_2O_5/SiO_2$ 1차원 광자결정체를 제작하고 그 특성을 고찰 하였다. 파장에 따른 투과도 측정 결과 1550nm파장에서 투과되고 1310nm 및 1490nm파장에 대한 차단이 이론값과 일치하였다. 1550nm 파장 대에서 손실이 매우 낮은 flat-투과 밴드가 생성되었다. 특히 입사각도에 따라 flat-band 중심 파장의 변화를 이용하므로 새로운 개념의 WDM 소자로의 응용이 가능하다.