• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.2006-2013
• /
• 2015

In this paper we propose a multi-protocol gateway system based on low power wireless communications. The proposed multi-protocol gateway system was designed to allow real-time monitoring and control of the on-site situation through wired and wireless networks by gathering information for streetlight power control and environmental monitoring. The sensing data using multi-sensors with composite processing that selectively used wired or wireless communication (e.g., CDMA, Ethernet (TCP/IP), GPS, etc.) were designed to act as intermediaries that transmitted to the main server through ZigBee. Inaddition, they were designed by separating a CPU board and baseboard to ensure low maintenance cost and ease of hardware replacement. The proposed multi-protocol gateway system's power, impact, continuous operation stability, and immunity test results obtained a normal operation success rate of over 95% and normal continuous operation results. Moreover, in the voltage drop test, instantaneous immunity test, and conductive RF electromagnetic field immunity test, it obtained an average rating result of "A".

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.557-560
• /
• 2006

무선 센서 네트워크를 이용한 초음파 기반 위치 인식 기술은 저비용 및 정확성을 장점으로 갖는, 잘 알려진 실내 위치 인식 기술 중 하나이다. 본 논문에서는 IEEE 802.15.4 라디오 기반의 능동적 추적 시스템에서 다중 이동 객체의 위치 인식을 지원하는 추적 시스템을 제안한다. 이를 위해 능동적 추적 시스템에서의 다중 객체 위치 인식 기술 개발상 문제점을 분석하고 이를 해결하기 위한 저비용의 Adaptive Beaconing 알고리즘을 제안한다. 또한 제안한 알고리즘을 이용한 추적 시스템을 구현한 후, 실제 건물 내부에 배포하여 실험함으로써 다중 객체 위치 추적을 위한 알고리즘의 이론적 특성을 분석하였다.

• KSCI Review
• /
• v.15 no.1
• /
• pp.77-81
• /
• 2007

센서 네트워크 라우팅에 대한 공격은 무선이라는 네트워크 환경 때문에 애드혹과 유사하게 이루어 지고 있다. 하지만 이를 대처하는 보안 매커니즘은 노드가 보다 제한된 자원을 가지므로 그대로 적용할 수 없어 새로운 연구가 필요하게 되었다. 본 논문에서는 웜홀 이라는 라우팅 공격에 대하여 다중 경로를 이용하여 공격을 회피하고 검출하는 방법에 대하여 제안한다. 다중 경로 환경에서 주경로와 대체 경로간 홉당 지연시간을 비교하여 웜홀 경로를 회피, 검출하고 검출 오차를 줄이기 위하여 블랙리스트를 방법을 사용한다. Ns-2 시뮬레이션 환경에서 제안한 방법을 이용한 웜홀 검출 메커니즘을 시뮬레이션하고 웜홀과 정상 노드의 검출율을 비교하여 성능을 측정하였다.

• Journal of Internet Computing and Services
• /
• v.12 no.2
• /
• pp.47-53
• /
• 2011

When some sensors under Wireless Sensor Networks fail or become energy-exhausted, redundant mobile sensors might be moved to recover the sensing holes. Within rugged terrain where wheeled sensors are unsuitable, other type of mobile sensors, such as hopping sensors, are needed. In this paper, we address the problem of relocating hopping sensors to the detected sensing holes. Recent study for this work considered the relocation using the shortest path between clusters; however, the shortest path might be used repeatedly and create other sensing holes. In order to overcome the mentioned problem, we propose relocation schemes using the most disjointed paths or multi-paths. Simulation results show that the proposed schemes guarantee more balanced migration distributions of efficient sensors and higher movement success ratios of required sensors than those of the shortest path-based scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.12-19
• /
• 2016

The monitoring system in railway is under study to forecast any derailment and accident by defect of train. Because the monitoring system is composed of wireless sensor network based on ZigBee-communication between inside and outside of train, the study for wireless channel analysis is required. Especially, if multipath delay profile exist in the channel, the equalizer and channel estimator can be required for preventing receiver performance degradation. Therefore, we analyzed the wireless channel in train environment using measured data and, proposed the channel estimation method through the characterisitic of chip code, under the consideration of the channel characteristics in train. To show the performance of proposed method, we demonstrate the performance by mean square error(MSE), computational complexity and bit error rate(BER).

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.1-10
• /
• 2006

Ubiquitous computing, a new type of network environment has been generating much interest recently and has been actively studied. In ubiquitous computing, the sensor network which consists of low electric power ad-hoc network-based sensors and sensor nodes, is particularly the most important factor The sensor network serves as the mediator between ubiquitous computing and the actual environment. Related studies are focused on network . management through lightweight hardware using RFID. However, to apply these to actual environment, more practical scenarios as well as more secured studies equipped with secures and efficiency features are needed. Therefore, this study aims to build a wireless network based on PTD for multi users, which provides the largest utility in individual networks, and propose an appropriate management method. The proposed method is designed to enhance security and efficiency related to various services required in wireless networks, based on the reliable peripheral devices for users or pm. using pm, which has been applied to electronic commerce transactions in existing papers, this study also proposed an appropriate management method that is suitable for a dynamic environment and setting a temporary group to provide various services.

• Journal of the Korea Society for Simulation
• /
• v.29 no.3
• /
• pp.73-82
• /
• 2020

In the fourth industrial revolution, wireless sensor networks (WSNs) are an important element of collecting and analyzing data in a variety of environments without human intervention. This sensor network is greatly affected by topology and routing protocols. Routing protocols, which affect energy consumption, are executed after deploying sensor nodes. Once built, they are difficult to change. Before the WSN is deployed, a routing protocol is carefully selected in view of various environments and the performance of the protocol is evaluated. In this paper, we propose a model to simulate multiple routing protocols using a discrete event system specification (DEVS). The DEVS-based proposed model simulates various situations without changes and structures of the its model as algorithms of the routing protocols are implemented in its coordinators model. To verify normal behaviors of the proposed model, the number of report delivery and the energy consumption of the sensor network were compared using representative protocols LEACH and Dijkstra. As a result, it was confirmed that the proposed model executes normally in both routing protocols.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.629-634
• /
• 2016

This paper describes the implementation of a ZigBee sensor node that can be utilized as a multiband and machine to machine (M2M) communication gateway. The IEEE 802.15.4-2003 standard was used as the wireless network frequency band. Ember's Type EM357 SoC was used as the transmission and reception device to perform the communication function, and it was also used for both the main M2M gateway and the sensor node. For the implementation of the operating protocol, EmberZNet Stack 4.5.4 from the Ember Corporation was used. The measurement of the reception sensitivity in the receiving module and the actual output signal from the reference were obtained from the transmission of a packet, and the packet included the M2M gateway within the attached ZigBee sensor. The packet error rate was measured as 0% with a -98 dBm reception sensitivity at the ZigBee frequency. In addition, excellent current characteristics of the ZigBee modules were shown by the implementation of the low-power circuit.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.1
• /
• pp.75-79
• /
• 2010

Wireless sensor networks (WSN) are widely used in many applications. WSN acquires the data of surrounding environments with sensors attached to each node. It is important to design sensor networks that can communicate energy-efficiently as well as to get sensor readings with high accuracy. In this paper, we propose a novel routing scheme that assures high accuracy and significantly reduces data transmission costs in WSN with faults. First, we organize a number of network topologies randomly for routing sensor readings to the base station. Because every sensor node is connected each other with a single path, redundant transmissions are not incurred. It can reduce unnecessary transmissions and guarantee final sensor readings with high accuracy. To show the superiority of our scheme, we compare it with an existing multi-path routing scheme. In the result, our scheme has similar accuracy as the existing scheme and reduces unnecessary data transmissions by about 70% over the existing technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11A
• /
• pp.1021-1033
• /
• 2008

In recent years, the growing interest in wireless sensor network has resulted in thousands of publications. Most of this research is concerned with delivering raw data such as temperature, pressure, or humidity. Recently, the focus of sensor network paradigm is changing for delivering multimedia contents. However, most existing routing protocols are not very practical for transmitting multimedia contents in resource constrained sensor networks. In this paper, we propose an optimized node-disjoint multi-path routing protocol for throughput enhancement and load balancing. We focused on how to allocate traffic to independent multiple end-to-end routes. Decentralized transmission using our node-disjoint multi-path routing scheme results in bandwidth aggregation and throughput enhancement. In addition, our scheme provides ways to remove link-joint routes for decreasing routing overhead.