• Title/Summary/Keyword: 다중모드 설계

Search Result 212, Processing Time 0.023 seconds

Design and Fabrication of Broad Gain Laser Diodes (광대역 이득 레이저 다이오드 설계 및 제작)

  • 권오기;김강호;김현수;김종회;심은덕;오광룡
    • Korean Journal of Optics and Photonics
    • /
    • v.14 no.3
    • /
    • pp.286-291
    • /
    • 2003
  • Asymmetric multiple quantum well ridge waveguide laser diodes (AMQW RWG LDs) with a wide and flat gain spectrum were designed and fabricated. The operating parameters and gain spectra were measured and analyzed for uncoated and anti-reflection (AR) coated LDs. For AR coated 500 mm-long RWG LOs, the extremely flat gain spectrum over a spectral range of 90 nm was obtained at the current 75 ㎃.

A Crypto-processor Supporting Multiple Block Cipher Algorithms (다중 블록 암호 알고리듬을 지원하는 암호 프로세서)

  • Cho, Wook-Lae;Kim, Ki-Bbeum;Bae, Gi-Chur;Shin, Kyung-Wook
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.20 no.11
    • /
    • pp.2093-2099
    • /
    • 2016
  • This paper describes a design of crypto-processor that supports multiple block cipher algorithms of PRESENT, ARIA, and AES. The crypto-processor integrates three cores that are PRmo (PRESENT with mode of operation), AR_AS (ARIA_AES), and AES-16b. The PRmo core implementing 64-bit block cipher PRESENT supports key length 80-bit and 128-bit, and four modes of operation including ECB, CBC, OFB, and CTR. The AR_AS core supporting key length 128-bit and 256-bit integrates two 128-bit block ciphers ARIA and AES into a single data-path by utilizing resource sharing technique. The AES-16b core supporting key length 128-bit implements AES with a reduced data-path of 16-bit for minimizing hardware. Each crypto-core contains its own on-the-fly key scheduler, and consecutive blocks of plaintext/ciphertext can be processed without reloading key. The crypto-processor was verified by FPGA implementation. The crypto-processor implemented with a $0.18{\mu}m$ CMOS cell library occupies 54,500 gate equivalents (GEs), and it can operate with 55 MHz clock frequency.

A Design and Implementation of the Management Sever for the Gateway Supporting Home Networking Using the UML (UML을 이용한 흠 네트워킹 지원 게이트웨이 관리 서버 설계 및 구현)

  • 권진혁;민병조;강명석;남의석;김학배
    • Journal of the Korea Computer Industry Society
    • /
    • v.5 no.3
    • /
    • pp.393-404
    • /
    • 2004
  • Recently, public home have used a more than two computer connected with network, and several home appliances using independently with internet or network are developing to be related closely with the network. Therefore, the home utilized for a simple terminal of the global network in the past is being expanded to another part of the sub network. For a variety of connecting home-area protocols with the existing existing network, we require a new Residential Gateway(RG) that does not only make the home-area network operating in the sub network but also connects to the external network. In this paper, RG has intrinsic limits against flexible service due to IP address assignment and hardware capacity. In order to solve this problem in the RG, we propose a Management Server(MS). The MS that offers the integrated managements and control services for a variety of devices connected the RG in the home-area. It can not only solve the dynamic IP address assigning problem but also assigns private IP addresses to the home network devices through the Network Address Translation(NAT). It also provides somewhat useful functions for the home network and the RG for other additional services. <중략> The MS is using a SNMP protocol for managing the RG in the domain, a polling method of the MS and the RG compose a sequence polling method, a polling method using a multi-process and a multi-thread. In this paper, we introduce a problem with polling method separately, show a polling method between the MS and the RG using a multi-thread.

  • PDF

A design of Key Exchange Protocol for User Centered Home Network (사용자 중심의 홈네트워크를 위한 키 교환 프로토콜 설계)

  • 정민아
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.8 no.3
    • /
    • pp.654-660
    • /
    • 2004
  • In this paper, we define that pervasive home network, which provides necessary services for user properties and removes distractions to improve the quality of human life. So, user can enjoy home network technology including devices and softwares at any place with no knowledge of networked home, devices, and softwares. In this home network, a mobile agent, called LAFA, can migrate to unfamiliar home network and control the necessary devices. For this environment, we design security management module for authenticating user and home server that access some other home networks, and for protecting text, multimedia data, and mobile agent that are transferred between home networks. The security management module is composed of a key exchange management module and an access control management module, for key exchange management module, we propose a key exchange protocol, which provides multimode of authentication mode and key exchange mode. One of these two modes is selected according to the data type.

The Design and Implementation of Improved Anti-Collision Algorithm for Vehicle User Authentication System (차량 사용자 인증 시스템을 위한 향상된 충돌 방지 알고리즘의 설계 및 구현)

  • Kim, Kyeong-Seob;Lee, Yun-Seob;Choi, Sang-Bang
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.1
    • /
    • pp.57-67
    • /
    • 2013
  • Because many of the FOB key, anti-collision algorithm for a seamless multi-access is applied to the smart-key system. In this paper, we have designed and implemented improved anti-collision algorithm that dramatically reduces the communication response time required in the user authentication process immediately after by dynamically changing the order in which the request of the user ID as the user ID on immediately before in the smart key system for vehicles that use many of the FOB key. In order to evaluate the performance of the system the improved anti-collision algorithm is applied, we show the behavior of the algorithm implemented in the state actually mounted on the vehicle and verify that communication response time required for many of the FOB key was reduced by about 33% compared to existing algorithms.

Design of wide-band slot loop antenna by using dual offset-fed (이중 오프셋 급전을 이용한 광대역 슬롯 루프 안테나의 설계)

  • 조영빈;나종덕;전계석
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.28 no.11A
    • /
    • pp.912-920
    • /
    • 2003
  • This paper is about the design of a small wide-band slot loop antenna, which consists of dual offset-fed and rectangular loop within the slot on a substrate. The proposed antenna is a novel structure generating a multi-resonances due to three geometrical resonance structures. The impedance matching of this antenna can be accomplished by changing the offset position of dual-fed at resonance frequencies. In this experiment, the slot of a fabricated antenna has a center frequency of 6.755㎓, 12.5mm${\times}$50mm in size and the rectangular loop has 10.5mm${\times}$27.5mm in size. The measured result is fractional bandwidth 63.21% with VSWR 2:1, which is agreed with the simulated result within 5% of error, and the maximum antenna gain is 7.42㏈i.

Interchannel RF Power Fluctuation in WDM-RoF System Employing Photonic Crystal Fiber (광결정 광섬유를 이용한 WDM-RoF 시스템의 채널간 전력변화 편차 분석)

  • Kim, So-Eun;Lee, Chung-Ghiu
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.16 no.4
    • /
    • pp.821-828
    • /
    • 2012
  • In this paper, we report that the differences between RF power levels can be improved in wavelength division multiplexing - radio over fiber (WDM-RoF) system by using a photonic crystal fiber. In a WDM-RoF system, each WDM channel experiences different received RF power level fluctuation in remote node (RN) because of wavelength-dependent dispersion. Since each WDM channel experiences different power fluctuation, the RF power fluctuation acts as a design constraint in viewpoint of network design. We designed a photonic crystal fiber to improve the effect of wavelength- dependent dispersion on RF power fluctuation. Also, we analyzed the wavelength-dependent difference of inter-channel RF power fluctuations.

An Effective Method of Design and Implementation for Conditional Access System in Terrestrial-DMB (지상파DMB 제한수신 시스템의 효율적인 설계 및 구현 방법)

  • Lee, Yong-Hoon;Lee, Jin-Hwan;Lee, Gwang-Soon;Lee, Soo-In;Kim, Nam
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.10A
    • /
    • pp.1020-1030
    • /
    • 2006
  • As the Terrestrial DMB(T-DMB) has been launched, service providers are focusing on finding a business model as well as preparing the variety of data services. So, the need for development of the CAS(Conditional Access system) is urgently required and its domestic standardization is also in progress. This Paper proposes design and implementation methods of an Ensemble Re-multiplexer and receiver platform for its verification that can be used for the CAS system in T-DMB. And, with transmitting ensemble stream scrambled by the proposed Ensemble Re-multiplexer, we verified their performance by do-scrambling and decoding according to scramble mode at the receiver platform.

A Design and Implementation of Integrated MAC Protocol with SR/NSR-ONU supporting the burst traffic over ATM-PON (ATM-PON에서 버스트 트래픽을 지원하는 SR/NSR 다중 모드 MAC Protocol 설계 및 구현)

  • Jang, Seong-Ho;Jang, Jong-Woo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.28 no.1B
    • /
    • pp.18-26
    • /
    • 2003
  • Earlier efforts on optical access concentrated on the design of PONs for the collection and distribution portion of the access network PON architecture is very simple but it requires MAC protocol for control of upstream traffic This paper proposes a Request-Counter MAC protocol for a broadband access network using an ATM Passive Optical Network supporting CBR/rtVBR, nrtVBR, UBR and ABR traffic For the proposed MAC scheme, we present Grant Field format, Minislot format, and bandwidth allocation algorithm From the simulation result, we have confirmed that our proposed scheme can reduce the average cell delay in comparison to that of conventional MAC schemes.

Implementation of Novel Bio-sensor Platform based on Optical MMI and Directional Coupler (광 MMI와 방향성 결합기에 기초한 새로운 바이오 센서 플랫폼의 구현)

  • Kwang-Chun Ho
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.23 no.2
    • /
    • pp.163-168
    • /
    • 2023
  • In this paper, a novel platform for chemical sensing and biosensing is presented. The working principle is based on the coupling efficiency and interference properties of optical directional coupler (DC) and multimode interference coupler (MMIC). It has been realized using planar technology to allow integration on a silicon substrate. Firstly, the dispersion curves of DC and MMIC is described, and the design specification of an optimized slot optical waveguide to increase waveguide sensitivity is selected. Next, the sensor response to the refractive index change of sensing analyte is numerically simulated. The numerical results reveal that high effective index change per refractive index unit (RIU) change of analyte is obtained, and the sensitivity can be tuned using the DC and MMIC design technique.