• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.63-70
• /
• 2006

This paper presents the results of Ka band qualification model multiplexers for COMS Payload to be launched in 2008. These are the input and output multiplexers of the satellite transponder to use available frequency resources effectively and the diplexer of the satellite antenna to use the same reflector for both transmitting and receiving frequency bands, respectively. The input multiplexer with four frequency channels has four(4) independent channel filters which consist of an 8-pole elliptic band-pass filter for high frequency selectivity and a 2-pole equalizer for group delay equalization. For low insertion loss, mass and volume reduction, manifold type os employed for output multiplexer. E-plane T-junction is used for either splitting or combining a frequency band into two sub-bands. Asymmetric inductive irises are used to tune the receiving filter easily. The electrical performance and environmental test such as vibration test, mechanical shock test, thermal vacuum test and EMC test are performed and the results of all qualification model multiplexers are compliant to the requirement of each multiplexer. Followed by this qualification, the flight model equipment will be developed.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.3
• /
• pp.11-17
• /
• 1993

An active diplexer can be realized by using a MESFET and 2-sections of asymmetrical coupled bandpass filter, where the admittance inverter parameters in equivalent circuit of asym- metrical coupled microstrip lines are given as a function of an fundamental design parameter of a bandpass filter. An experimental active diplexer was designed over 22 and 18 percent bandwidth centered at 9 GHz and 11 GHz respectively, and the design data was optimized by Super-Compact. The gain performance was $6.2\pm0.3$dB in each band of 8.3~9.6 GHz and 10.3~11.8 GHz The measured bandwidth of the active diplexer was closely matched to design data but measured gain was slightly lower (1.5 dB) than the designed value.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1384-1385
• /
• 2008

본 논문에서는 내장된 수동형 트리플렉서와 듀얼 밴드/트라이모드 RF 모듈을 PCB에 내장시켜서 북미향 CDMA용 부품으로 제작하였다. 수동형 트리플렉서는 모든 수동 소자들을 다층 PCB 기판 안에 내장시키고 그 위에 GPS용 SAW 대역통과필터를 이용하여 설계 및 제작하였다. 8개의 인덕터와 커패시터로 이루어진 수동 회로는 다이플렉서와 병렬 공진기, 임피던스 매칭 회로로 구성되어 있다. CDMA용 듀얼밴드/트라이모드 RF 모듈은 트리플렉서와 CDMA, PCS용 듀플렉서를 테스트 보드 위에 조합하여 제작하였다. 측정된 주파수 특성들은 시뮬레이션 값과 비교적 일치하였다. 트리플렉서와 듀얼 밴드/트라이모드 RF 모듈은 각기 $3{\times}4mm^2$와 ${7\times}7mm^2$의 작은 크기였다. 설계 및 제작된 소자들은 고성능과 경박단소화, 저가화 등의 이점이 있기 때문에, 북미향 CDMA용 단말기의 응용부품에 적용될 수 있을 것으로 예상된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.582-593
• /
• 1999

This paper presents the design and fabrication of the diplexer for a KOREASAT-III Ka-band satellite transponder. The transmission characteristics of the diplexer is analyzed by calculating the generalized scattering matrix using mode matching method. It is composed of 2 bandpass filters, coupled with H-plane T-junction having symmetrical inductive iris and E-plane metal insert structures. Compared with the size and weight of the Rx and Tx filter loaded with a transponders respectively, those of the diplexer can be effectively reduced. In a high power transmission, the variation of the filter characteristics is minimized by the scheme that irises are extended to the exterior of H-plane of the waveguide. This scheme needs no extra heat sinks for dissipating high power. The diplexer is designed to improve the simplification, durability and reliability by eliminating tuning screws, which have been used to compensate for the characteristics of fabricated filters. The bandpass filters of the diplexer show the insertion loss of less than 1.2 dB and the return loss in excess of 15 dB. The isolations of more than 65 dB have been achieved between Rx and Tx filter.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.201-204
• /
• 2007

In this paper, fully embedded and miniaturized diplexer device has been developed and characterized for dual-band/mode CDMA handset applications. The size of the embedded diplexer is significantly reduced by embedding high Q circular spiral inductors and high DK MIM capacitors into a low cost organic package substrate. The fabricated diplexer has insertion losses and isolations of -0.5 and -23 dB at 824-894 MHz and -0.7 and -22 dB at 1850-1990 MHz, respectively. Its size is $3.9mm{\times}3.9mm{\times}0.77mm$. The fabricated diplexer is the smallest one which is fully embedded into a low cost organic package substrate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.774-783
• /
• 2007

This paper presents an integrated packaging antenna-diplexer module for wireless communication systems in the Cellular and SDMB band. The design and the realization of the proposed one are experimentally analyzed and discussed. It consists of a dual-resonance antenna and a diplexer with a multi-layer LTCC(${\varepsilon}_r=7.8,\;tan\;{\delta}=0.0043$) technology with integration capability and low loss. The dual-resonance antenna of the proposed module has the meander line structure for size reduction and has the shorting structure of an inverted F antenna to achieve good impedance matching. The diplexer of the proposed module was designed with the combination of low pass filter(LPF) and high pass filter(HPF). Decreasing the mutual interference between them provides a high isolation characteristic. The proposed antenna-diplexer module with dimensions of $27.5{\times}12.0{\times}2.2mm$ operates within a range from 813 MHz to 902 MHz for the cellular band and from 2,586 MHz to 2,655 MHz for the SDMB band. And the measured gain of the fabricated module is -1.96 dBi for Cellular band and -5.43 dBi for SDMB band. The parameters for the antenna-diplexer module are investigated and the several performances are discussed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.9
• /
• pp.661-667
• /
• 2018

Tactical communication radio systems that employ software defined radios(SDRs) have been developed for achieving high-speed data transmissions and voice communications. Such systems possess multiband and multichannel features, and can potentially replace several existing radio systems. This paper proposes a design for wideband antennas by incorporating a diplexer matching network for tactical vehicles. The proposed antenna design includes two radiators(upper and lower) and a diplexer matching network connected to the end of the feed line such that the LC matching networks are interleaved in the lower radiator and spring mount. By employing the diplexer matching network, the designed antenna can perform wideband impedance matching for the fifty ohm feed line. The designed LC networks aid in varying the effective electrical length of the antenna according to the operation frequency. The primary objective behind adjusting the electrical length is to vary the current distribution above and below the LC networks. The proposed antenna was fabricated and tested in an open site. The obtained evaluation results show that the designed antenna can achieve a relative bandwidth of 190% with a VSWR value of 3.5:1, and can attain good antenna gains over VHF and UHF bands.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.149-152
• /
• 2002

In this paper, We have designed an internal chip type-ceramic antenna and diplexer for dual-band handset applications. for increasing bandwidth, antennas used a meander line structure with L, C matching network. The designed diplexer is based on the multi-layered structure for the purpose of the LTCC applications. We have given a notch using resonator for elevated attenuation characteristics.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.403-403
• /
• 2004

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.425-428
• /
• 2008

A new type of cross-coupled planar microwave filter using coupled microstrip square open-loop resonators diplexer pro-posed. A method for the rigorous calculation of the coupling coefficients of basic four pole electric and magnetic coupling structures encountered. Simple empirical models are derived for estimation of the coupling coefficients. Experiments are performed to verify the theory. And a method for diplexer matching is conjugate matching that has characteristic better than open matching method.