• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.5
• /
• pp.480-492
• /
• 2009

In this paper, we proposed a broadband U-shaped RFID tag antenna with near-isotropic characteristic at UHF band. The proposed tag antenna is composed of the U-shaped half wavelength dipole and a rectangular shaped feed. The rectangular shaped feed that is located inside U-shaped dipole is connected for conjugate impedance matching with the commercial tag chip. A better constant gain deviation characteristic in the operating frequency band is achieved by inserting a rectangular slit in the lower center of the U-shaped antenna body. On the condition of VSWR<2, the tag antenna had the measured bandwidth of 10.36%, from 860.5 to 954.5 MHz, and 9.84%, from 864.5 to 954 MHz, for antenna without slit and with slit, respectively. On the condition of VSWR<5.8, the tag antennas had the measured bandwidth of 15.78%, from 835.5 to 979.5 MHz, and 15.89%, from 837 to 981.5 MHz, for antenna without slit and with slit, respectively. The difference between the maximum and minimum gain deviations of tag antenna without slit in the operating frequency band is 0.53 dB since the maximum and minimum gain deviations are 3.86 dB and 3.33 dB, respectively. Whereas the difference between the maximum and minimum gain deviations of tag antenna with slit in the operating frequency is 0.06 dB since the maximum and minimum gain deviations are 3.60 dB and 3.54 dB, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.233-240
• /
• 2019

In this paper, due to the development of 5G communication technology, an antenna capable of covering both LTE and 5G bands is currently needed. In addition, we designed and manufactured a single feed antenna for the integrated public network (LTE) and 5G frequency dual band cover to satisfy the frequency bandwidth of more than 10% in each band. The antenna designed by adopting the dipole of the basic dipole antenna in a planar structure is a form in which the radiating element is vertically extended at all of the 700 MHz antennas and folded into a 'ㄷ' shape. In addition, the radiating element of the 700MHz band serves as a reflector of the 3.5GHz band radiating element. As a result, the 700 MHz band -10 dB bandwidth 104 MHz(14.8%) and 3.5 GHz band -10 dB bandwidth 660 MHz(18.8%) were obtained and the radiation pattern characteristic resulted in gains of 8.46 dBi, beam width E-plane 55°, H-plane 81° and 3.5 GHz bands 6.14 dBi, beamwidth E-plane 79°, H-Plane 49°.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.193-196
• /
• 2004

This paper have a whole azimuth Omni-directional radiation pattern and will become the good radiation efficiency for applies in the steeve antenna and form which is the appearance. We contain by whole course of actual implement model to antenna design. And we will confirm the efficiency the analysis of the antenna to design and through a simulated experiment according to the implementation Ideal characteristic of the antenna to be used between 3.1 and 10.6 GHz of UWB.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.207-211
• /
• 2015

In this paper, we proposed a broadband planar Yagi-Uda dipole antenna with dual tapered balance and unblance (balun) by CPW-fed to CPS. This antenna consisted of driver, three directors, dual tapered balun and CPS-fed to CPS. The fed structure of CPW-fed to CPS had a benefit points much simpler than other planar Yagi-Uda antennas and provided design more flexibility in arranging the reflector. The proposed antenna is introduced dual tapered balun to improve the impedance matching. It balun is inserted between the CPW-ground and the CPS. The proposed antenna is exhibited the bandwidth of 4.78 GHz (1.94~6.72 GHz) (S11 < -10 dB) and the gain of 4.9~7.2 dBi within that bandwidth. This antenna will applicate wireless communication.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.3
• /
• pp.116-120
• /
• 2015

In this paper, a step type driver dipole antenna with a tapered balance and unbalance (balun) by a coplanar waveguide (CPW) to coplanar strip (CPS) transition is proposed. The proposed antenna consisted of step type driver, a CPW to CPS transition and tapered balun. The proposed antenna is realized the multi and wide resonate frequency band to introduce the step type driver and tapered balun. The step type driver is acted as a director too. This antenna could be more easily designed than the conventional printed quasi-Yagi dipole antenna. The operating frequency bandwidth was 650 [MHz] (2.65~3.3 GHz), 900 [MHz] (4.7~5.6 GHz) under a return-loss criterion of less than 10 dB. The measurements of the proposed antenna exhibited good results in the wideband operating frequency and radiation pattern. The proposed antenna can support wireless communications applications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.128-131
• /
• 2000

This paper describes design for dual-linear polarization antenna using EMC(electromagnetic-coupled) dipole. EMC dipole has a simple element structure and it is fed by microstrip line. Vortical and horizontal polarization are determined by structure of dipole fed by microstrip line. FDTD Method is used for an analysis of antenna element. Length, width, height and offset of dipole are designed for 1-element antenna. Resonant length of diploe differs from the calculated value by a formula because of coupling effect of dipole and feed line. Radiation Power is controlled by the offset of dipole. In prectical fabrication of antenna array, a constant height of dipoles is required. Therefore, the teflon plate with height of 0.8 mm is considered in antenna element design for the vertical polarization.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.647-650
• /
• 1989

The driving-point impedance of the center-fed planar dipole antenna is obtained using the method of moments (MOM). For the thin dipole antenna, our numerical result is compared with that of the inverse method by D. R. Rhodes as well as the known solutions of equivalent wire antenna. For the frequencies of L-band and S-band, the driving-point impedances of the thick planar dipole antennas are measured by experiment and compared with the numerical results.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.347-348
• /
• 2008

We investigate the characteristics of a dipole antenna on an artificial magnetic conductor (AMC) constructed of a normal material and a ground plane. We studied how the antenna performance is affected by changes in the dipole length and the distance between the dipole and the ground plane. The relation between the reflection phase of the AMC and the input resistance of the dipole for input impedance matching is also verified.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.1 s.24
• /
• pp.33-40
• /
• 2006

A compact broadband active composite dipole antenna for direction finding system at the V/UHF-band is presented. It uses the composite structure which improves the antenna gain and the active circuit for broadband operation. This type of antenna has a high gain more than that of one dipole antenna within limited length(1m). The basic design and performance of both antenna structure and integrated active circuit are presented.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.133.1-133.1
• /
• 2011

태양풍이 지구 전파통신에 미치는 영향을 예측하고 대응하기 위해 전파연구소와 협력하여 태양풍의 운동을 모니터할 수 있는 시스템을 개발하고 있다. 태양풍이 일으키는 섬광(scintillation)에 의해 태양풍 배후에 있는 전파원 밝기가 변하는 것을 측정하여 역으로 태양풍의 이동속도, 전자밀도 등을 유도하는 원리를 이용한다. 포물면형의 전파망원경 대신 시야가 넓은 다이폴 안테나를 24개 단위로 묶은 타일 32개를 동서-남북으로 수백미터 넓이의 부지에 배열하고 전자빔조향으로 원하는 천체를 추적한다. 타일은 수동으로 남북방향으로 움직일 수 있어 계절별로 태양근처의 전파원을 잘 볼 수 있도록 하였다. 각 타일에서 나온 신호는 약 10MHz의 대역폭으로 디지털화되어 컴퓨터에 기록되고 실시간에 가깝게 각 타일간의 천체 위치별 위상차를 보정한 후 합성되어 전파원의 세기를 측정한다. 이 신호들을 교차상관시키면 야간에는 천문용 간섭계로도 사용할 수 있다. 기본적으로는 MWA를 참고해서 설계한 것이나, 동작을 입증하기 위해서 타일 3개로 이루어진 시제품도 제작하였다. 현재 각 부분별로 제작이 진행되고 있으며 하드웨어는 올해 말까지 완성될 것이다.