• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.460-464
• /
• 2001

Recently, the use of Robot increase little by little for the purpose of developing a welding quality and productivity in the arc welding part. It is more important to contact the seam for arc welding before moving a welding robot. There are two types of method to contact the seam namely contact and noncontact type largely In this paper, image processing sensor(a kind of non-contact sensor) is concerned to track the seam by using laser diode and CCD camera. A structured laser diode's light illuminated on the weld groove and the reflected shape is introduced by CCD camera. The image board captures this image and software analyzes this image. The robot is moved and welded exactly as acquired image X-Y data is changed with robot's X-Y value. Also, most of seam tracking are considered by changing the program simply in case of the different weld prove of plane surface.

• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.419-427
• /
• 1996

Thermally-stabilized fiber-optic current sensors are proposed and demonstrated. The sensor head is made of two coil formers combined perpendicularly. In this sensor head, bending-induced birefringences can be reduced to the level much smaller than those of the single former type because the eigen-axes of the two perpendicular coil formers are made orthogonal to each other. Moreover, thermal variation of the birefringence is also expected to be minimized by the orthogonality of the two polarization eigen-axes. We changed the temperature slowly in the range of 20~45$^{\circ}C$ during 100 minutes. The overall linearity of the sensor is better than 1.2% in the range of 0~1000A. The long-term fluctuation of the sensor is less than 1% when measured for 3 hours at 500A and room temperature. Two orthogonally-polarized laser diodes are combined together to make the incident beam unpolarized. In the signal processing, the signals are separated by two parts and normalized respectively, which minimize the efects of optical fluctuations coming from sources, connectors, etc.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.133-135
• /
• 2006

We propose and fabricate a novel fiber optic sensor for the detection of abnormal structural signals from various constructions. It's advantages are highly sensitive. small in dimension and electro-magnetic immune. Since this sensor was simply constructed with a single-mode fiber at infra-red wavelength and a laser-diode with the wavelength of 625 nm, the modes in the end of the optical fiber were not show as Gaussian distributed. So, we used the change of the mode distribution to get the sensor output by the external abnormal effect of structures. We investigated the resonance by performing the bending test of an aluminum beam attached with the fiber sensor. In the test, we could obtained a feasible signal to sense the abnormal condition of structures.

• Journal of the Korean Society of Combustion
• /
• v.11 no.3
• /
• pp.26-35
• /
• 2006

This work forcus on the development of gas sensor that measure the concentrations of exhaust gas using diode laser, Each diode laser for exhaust gas measurement is set to work at near-IR using both DA and WMS methods. Also use of fiber-coupled optical elements makes such a sensor rugged and easy to align. The results showed that gas concentrations of $O_2$, CO, $CO_2$, NO are accurately measured within ${\pm}2%$ error. The application of WMS method increased the beam intensity 2-3 times higher than DA method. It were experimentally compared WMS (Wavelength Modulation Spectroscopy) with DA (Direct Absorption) for the accuracy.

• Journal of ILASS-Korea
• /
• v.7 no.2
• /
• pp.1-6
• /
• 2002

It is necessary to develope a high frequency diode laser sensor system based on the absorption spectroscopy for the measurement of temperature of the spray flame. DFB diode laser operating near $2.0{\mu}m$ was used to scan over selected $H_2O$ transitions near $1.9{\mu}m\;and\;2.2{\mu}m$, respectively. The measurement sensitivity at wide range of sweep frequency was evaluated using multi-pass cell containing $CO_2$ gas. This diode laser absorption sensor with high temporal resolution up to 10kHz was applied to measure the gas temperature in the spray flame region of liquid-gas 2-phase counter flow flame. The successful demonstration of time series temperature measurement in the spray flame gives us motivation of trying to establish non-intrusive temperature measurement method in the practical spray flame.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.141-147
• /
• 2003

This paper represents an absolute positioning system using a light navigation path for mobile robot. The absolute positioning system is composed of the projector unit which generates a laser beam using laser diode and mobile robot with the optical detector which has some optical sensors. The projector unit is fixed over the navigating plane of mobile robot to generate the light navigation path, and the optical detector located upper part of mobile robot detects the generated laser beam from the projector. The navigation of mobile robot is controlled by the micro-processor which compares the detected present position from the detector with the previously programmed navigation path. And experimental results show that our sensor system can be used for the absolute positioning system of the mobile robot.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.26.2-26.2
• /
• 2011

최근 주목 받고 있는 산화아연(ZnO)은 레이저 다이오드, 가스 센서, 자외선 센서, 투명전극 등으로 다양하게 사용될 수 있어 연구개발이 폭 넓게 이루어지고 있는 상황이다. 특히, 3.3 eV의 direct bandgap 에너지를 가지고 있는 ZnO은 현재 자외선센서로 많이 적용되고 있는 물질인 GaN계열을 대체할 수 있는 유망한 물질로 주목 받고 있다. 공기중의 산소나 수분의 표면반응에 의한 자외선 측정을 하는 ZnO을 나노선으로 만들게 되면, 표면대비 부피비가 박막에 비해 급격히 증가하기 때문에 민감도가 커지고 반응시간이 짧아지게 된다. 본 연구에서는 자외선센서의 민감도와 반응성을 향상시키기 위해 전기화학적 합성법을 통해 ZnO의 박막과 나노선을 제조하였다. 사진공정을 통해 3 ${\mu}m$의 간격을 가진 금(Au) 전극을 만든 후, 전기화학적 합성법을 통해 아연이온이 포함된 용액에서 정전류를 흘려보내 아연 또는 ZnO을 증착시킬 수 있었다. 첫 번째로 ZnO을 양쪽 Au 전극에서 동시에 증착하여 두 박막이 접합하였고, 두 번째는 100nm의 지름을 가진 Ni 나노선를 전극 양쪽에서 자석을 통해 자기장을 형성해 정렬시키고 ZnO을 Au 전극과 Ni 나노선에 증착한 후, Ni 나노선를 산화시킴으로써, ZnO 나노구조를 형성하였다. 세 번째로는 Au 전극 양쪽에 아연을 전기화학적 합성을 하여 박막으로 증착하고 고온에서 산화과정을 통해 100 nm 이하의 지름을 가진 ZnO 나노선를 형성하였다. 이렇게 만들어진 세가지 구조의 ZnO의 나노구조와 결정성은 주사전자현미경과 X선 회절 분석기를 통해 측정하였으며, 자외선에 대한 민감도와 반응성은 365 nm의 파장을 가진 자외선발생기와 소스미터장치를 통해 측정하였다. 박막에서 100 nm 이하의 지름을 가진 ZnO 나노선로 갈 수록 자외선에 대한 민감도와 반응성이 향상되었다.

• Clean Technology
• /
• v.26 no.4
• /
• pp.293-303
• /
• 2020

According to the World Health Organization (WHO), air pollution is a typical health hazard, resulting in about 7 million premature deaths each year. Sulfur dioxide (SO2) is one of the major air pollutants, and the combustion process with sulfur-containing fuels generates it. Measuring SO2 generation in large combustion environments in real time and optimizing reduction facilities based on measured values are necessary to reduce the compound's presence. This paper describes the concentration measurement for SO2, a particulate matter precursor, using a wavelength modulation spectroscopy (WMS) of tunable diode laser absorption spectroscopy (TDLAS). This study employed a quantum cascade laser operating at 7.6 ㎛ as a light source. It demonstrated concentration measurement possibility using 64 multi-absorption lines between 7623.7 and 7626.0 nm. The experiments were conducted in a multi-pass cell with a total path length of 28 and 76 m at 1 atm, 296 K. The SO2 concentration was tested in two types: high concentration (1000 to 5000 ppm) and low concentration (10 ppm or less). Additionally, the effect of H2O interference in the atmosphere on the measurement of SO2 was confirmed by N2 purging the laser's path. The detection limit for SO2 was 3 ppm, and results were compared with the electronic chemical sensor and nondispersive infrared (NDIR) sensor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.667-673
• /
• 2015

A laser diode(LD) has been studied in many fields what medical, industrial processing, sensor, advertising equipment, printing equipment. And the LD is being used in industry. However, LD will require precision handling. Therefore, the actual use of LD is limited to areas of specialization. In this study, attend to the characteristics of the LD what weak to electrostatic and physical impact, current and heat. And will make a sample module that use comfortably a various wavelength LD. Furthermore, Furthermore, through the printing CTP(Computer to Plate) equipment used the 128-channel LD-Driver, compares it with a 64-channel CTP device about the print speed and resolution. And will solved the problem of delay between the dot and the dot. Finally, consider the potential of the 256-channel LD-Driver.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.5
• /
• pp.499-507
• /
• 2004

We have studied tile detection techniques, which can determine the location and the weight of an intruder into infrastructure, by using fiber-optic ROTDR (Rayleigh optical time domain reflectometry) sensor and fiber-optic BOTDA (Brillouin Optical time domain analysis) sensor, which can use an optical fiber longer than that of ROTDR sensor Fiber-optic sensing plates of ROTDR sensor, which arc buried in sand, were prepared to respond the intruder effects. The signal of ROTDR was analyzed to confirm the detection performance. The constructed ROTDR could be used up to 10km at the pulse width of 30ns. The location error was less than 2 m and the weight could be detected as 4 grades, such as 20kgf, 40kgf, 60kgf and 80kgf. Also, fiber optic BOTDA sensor was developed to be able to detect intrusion effect through an optical fiber of tells of kilometers longer than ROTDR sensor. fiber-optic BOTDA sensor was constructed with 1 laser diode and 2 electro-optic modulators. The intrusion detection experiment was peformed by the strain inducing set-up installed on an optical table to simulate all intrusion effect. In the result of this experiment, the intrusion effort was well detected as the distance resolution of 3m through the fiber length of about 4.81km during 1.5 seconds.