• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.834-836
• /
• 2000

The round HTS wire is easier to handle than the rectangular HTS tape. This paper describes the coupling losses of the round HTS wires by finite element method. Effect of filament arrangement and filament size of the round HTS wire are considered. Three types of filaments arrangement, one and double layer radial filaments and Multi-filament, are considered. Calculation results show that coupling losses of the one layer filaments round HTS wire vary only a little with the direction of external magnetic field.

• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.172-175
• /
• 2003

Critical current ratio and n-value of Bi(2223)/Ag superconducting joint tape were measured as a function of uniaxial pressure. In the superconducting joint method, MM and MSM joint were used ; MM joint is direct connection of two -multi filamentary tapes, and MSM is connection of them by using a single -filamentary tape. It was observed that the critical current ratio(CCR) for jointed tapes was not dependent on the uniaxial pressure but joining methods. The n-value of jointed tapes has similar trends with that of the CCR. Especially, double MSM joint showed the highest electrical properties as 63.4-76.0%(CCR) and 3.5-5.1 (n-value). It is considered that the improvements are due to the better inter connections of multifilaments by two single filamentary tapes on both sides.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 초전도 자성체
• /
• pp.59-63
• /
• 2002

The purpose of this paper is to investigate the crystal texture of the 2223 phase and its relationship with PIT processing parameter. Ag-sheathed Bi-2223 multi-filament tapes were prepared by changing rolling reduction ratio. We analysed the degree of texture for 2223 phase after heat-treatment. According to X-ray pole-figure, the texture of the filaments located near surface and center were not so different each other for all rolling conditions. we found a little higher degree of texture for 60% rolling reduction. But its difference is not so high compared with those tapes with a lower rolling reduction ratio. Reaction induced texturing seemed to contribute with a large portion under present condition.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권1호
• /
• pp.4-7
• /
• 2012

Coated conductors have been developed to increase piece length and critical current for electric power applications. Otherwise, Many efforts were carried out to reduce AC loss of coated conductor for AC applications. Twisting and cabling processes are effective to reduce AC loss but, these processes can not be applied for tape shaped coated conductor. It is inevitable to have thin rectangular shape because coated conductor is fabricated by thin film deposition process on metal substrate. In this study, round shape superconducting wire was first fabricated using coated conductors. First of all, Ag coated conductor was used. coated conductor was slitted to several wires with narrow width below 1mm. 12ea slitted wires were parallel stacked on top of another until making up the square cross-section. The bundle of coated conductors was heat treated to stick on each other by diffusion bonding and then copper plated to make round shape wire. Critical current of round wire was measured 185A at 77K, self field.

• 에너지공학
• /
• 제20권3호
• /
• pp.185-190
• /
• 2011

본 논문은 초전도 에너지 저장장치(SMES)용 전도냉각형 고온초전도 자석의 설계, 제작 및 평가에 대해 기술한다. 고온초전도 자석은 황동 안정화재를 갖는 2개의 Bi-2223 다심 선재가 적층된 4-ply 도체로 제작된 22개의 double pancake coil(DPC)로 구성된다. 그리고, 각 DPC는 내경과 외경이 각각 500 mm, 691 mm이고 높이가 10 mm인 2개의 single solenoid coil로 구성된다. 코일 내부의 전기적 손실에 의해 발생된 열의 냉각을 위하여 DPC 사이에 두께 3 mm의 알루미늄 판이 내재된다. 고온초전도 자석은 2단 Gifford McMahon 냉동기에 의해 5.6 K까지 냉각된다. 충전전류가 증가할수록 방전시 고온초전도에서의 최대 온도가 증가 하였다. 충전전류가 360 A일 때 ��치 없이 고온초전도 자석에 1 MJ의 자기에너지가 성공적으로 저장되었다. 본 연구에서는 SMES용 전도 냉각형 고온초전도자석에 대한 열적, 전자기적 특성을 보이고, 본 연구를 통해 얻어진 결과는 전도냉각형 고온초전도자석의 최적설계 및 안정도 평가에 활용될 것이다.