• Proceedings of the ESK Conference
• /
• 1996.04a
• /
• pp.146-150
• /
• 1996

본 논문은 감성제품 및 부품의 형상데이터 처리시스템 구축을 목적으로한다. 감성공학적 디자인요 소변환 지원시스템의 전체구조는 다변량해석형기법을 활용하여 인간의 감성과 디자인과의 관련성을 분 석하고 이 결과들을 데이터베이스로구축하는 부분과 퍼지논리을 이용하여인간의 감성과 제품형상을 연결하는 추론기관 그리고 감성제품 및 부품의 구조를 지원하는 형상데이터 처리시스템으로 구성되어 있다. 본 논문에서는 형상데이터베이스를 이용한 형상데이터 처리시스템 구축에 관한 연구를 실시하여 보았다. 최근에 와서 데이터베이스 설계시 실세계의 데이터를 더욱 충실히 표현하기 위해 이를 객체 (object)를 사용하여나타낸 후, 이 객체들 사이에 존재하는 관련성에 관한 정보를 이용하여 데이터베 이스를 설계하는 연구가 활발히 진행되고 있다. 본 연구는 제품 세분화 과정에 객체지향 모델링기법을 고객의 감성이 잘 반영되는 가전제품 중 전화기에 적용하여 감성제품 및 부품의 형상데이터베이스를 구축하였다. 이러한 형상데이터 처리시스템은 제품설계 및 디자인 분야에 다양하고 폭넓게 적용 및 응용될 수 있을 것이며감성을 중시하는 미래의 제품설계분야에 적지않은 영향을 미칠 것으로기대된다ㅣ.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.286-289
• /
• 1997

In the design of structure the forces acting on the structure are important parameter for noise and vibration control. However, in the complex structure, the forces at the injection pomt on the structure cannot be measured directly. Thus it is necessary to find out indirect force evaluation method. In thls paper forces have been measured with in-situ vibration responses and system information. Three existing techniques of indirect force measurement, viz. direct inverse, principal component analysis and regularization have been compared. It has been shown that multi-vibration responses are essential for the precise estimation of the forces. To satisfy those cond~tions, Rotary compressor is adopted as test sample, because it is very difficult to measurc the injection forces from internal excitat~on to shell. It has also been obtained that relatively higher force IS transmitted through three welding paths to the compressor shell. It shows a good agreement between direct and indirect force evaluation wlth curvature shell and plate and is investigated the possibility of force evaluation of rotary compressor as a complex structure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.37-48
• /
• 1984

The yield-line analysis is used for earring out the limit analysis of reinforced concrete slabs which are for example like those of vertical walls of tanks subjected to the loads of hydrostatical type. It is considered both isotropic and orthotropic reinforcement using the coefficient of orthotropy with different edge conditions. The yield-line analysis is carried out by using the vertical work method and four collapse mechanisms including the fan mechanisms which is more realistic than over diagonal mechanisms is considered. It is found that the fan mechanisms are more complicated than ever simple diagonal mechanisms which have used for the orthotropically reinforced concrete slabs subjected to hydrostatic pressures. Especially Horton's study is extended in this study, and they are formulated to the constrained multi-variables nonlinear optimization problems, which are solved by the Rosen-Brock Hillclimb Procedure Program and are more critical.

• Economic and Environmental Geology
• /
• v.38 no.4 s.173
• /
• pp.435-450
• /
• 2005

The purpose of the study is to analyze the hydrogeochemical characteristics by multivariate statistical method, to interpret the hydrogeochemical processes for the new variables calculated from principal components analysis (PCA), and to infer the groundwater flow and circulation mechanism by applying the geostatistical methods for each element and principal component. Chloride and nitrate are the most influencing components for groundwater quality, and the contents of $NO_3$ increased by the input of agricultural activities show the largest variation. The results of PCA, a multivariate statistical method, show that the first three principal components explain $73.9\%$ of the total variance. PC1 indicates the increase of dissolved ions, PC2 is related with the dissolution of carbonate minerals and nitrate contamination, and PC3 shows the effect of cation exchange process and silicate mineral dissolution. From the results of experimental semivariogram, the components of groundwater are divided into two groups: one group includes electrical conductivity (EC), Cl, Na, and $NO_3$, and the other includes $HCO_3,\;SiO_2,$ Ca, and Sr. The results for spatial distribution of groundwater components showed that EC, Cl, and Na increased with approaching the coastal line and nitrate has close relationship with the presence of agricultural land. These components are also correlated with the topographic features reflecting the groundwater recharge effect. The kriging analysis by using principal components shows that PC 1 has the different spatial distribution of Cl, Na, and EC, possibly due to the influence of pH, Ca, Sr, and $HCO_3$ for PC1. It was considered that the linear anomaly zone of PC2 in western area was caused by the dissolution of carbonate mineral. Consequently, the application of multivariate and geostatistical methods for groundwater in the study area is very useful for determining the quantitative analysis of water quality data and the characteristics of spatial distribution.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.4
• /
• pp.260-265
• /
• 1997

Varietal distances were measured by Euclidian $D^2$ statistics in 1, 891 possible comparisons among sixty two varieties of Alisma plantago with seven characters such as leaf width, leaf length, stem length, number of stems per plant, root diameter, and yield of fresh and dry root. A complete linkage cluster analysis based on the Euclidian distance $(D^2)$ was attempted. Sixty two cultivars of Alisma plantago were largely classified into five subgroups. Group 1, 2, 3, 4 and 5 included twelve, twenty one, seventeen, five and seven cultivars, respectively. Most of the varietal groups were not associated with their geographical origins. Stem length and root weight among the seven characters were the largest contributors to the $D^2$ in both intra- and inter- groups.

• The Korean Journal of Applied Statistics
• /
• v.30 no.1
• /
• pp.135-145
• /
• 2017

Principal component analysis (PCA) describes the variation of multivariate data in terms of a set of uncorrelated variables. Since each principal component is a linear combination of all variables and the loadings are typically non-zero, it is difficult to interpret the derived principal components. Sparse principal component analysis (SPCA) is a specialized technique using the elastic net penalty function to produce sparse loadings in principal component analysis. When data are structured by groups of variables, it is desirable to select variables in a grouped manner. In this paper, we propose a new PCA method to improve variable selection performance when variables are grouped, which not only selects important groups but also removes unimportant variables within identified groups. To incorporate group information into model fitting, we consider a hierarchical lasso penalty instead of the elastic net penalty in SPCA. Real data analyses demonstrate the performance and usefulness of the proposed method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2061-2065
• /
• 2008

본 연구는 강우-유출 및 TOC의 패턴 분류를 위하여 광주 광산 강우관측소의 강우량자료와 나주지점의 유출량 그리고 기존의 BOD 및 COD 수질농도 측정값에 비하여 적은 오차요인과 빠른 시간에 결과 값을 얻을 수 있으며 유출량과 난분해성 물질에 대한 해석이 가능하고 재현성이 탁월한 TOC자료를 사용하였다. SOM을 적용하기 위해 먼저 Map의 크기는 Garcia가 제시한 $M=5{\sqrt{N}}$을 이용하여 결정한다. 이러한 비선형적인 다변량 자료를 분석하기 위해서 Map에 의해 구분된 자료 위치를 추출하여 원자료를 재구축하고 이를 통해 원자료를 패턴별로 분류 할 수 있었다. 이러한 패턴별 분류를 통해 유출량에 따른 TOC자료를 2차원의 Map 상에 시각적으로 가시화하여 비선형적인 경향이 강한자료의 분포적 양상을 이해하는데 큰 도움이 되며, 향후 이를 통해 예측을 위한 모형화 과정에도 크게 도움을 줄 것으로 기대된다. 또한, 강우자료 또는 유출량 자료만을 이용한 단일변량의 패턴분류를 위해 SOM의 적용이 가능할 것으로 판단되며, 이는 각 변량의 본질적인 특성을 파악할 수 있을 것으로 기대된다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.1
• /
• pp.101-113
• /
• 2010

Recently actual rainfall pattern is decreasing rainy days and increasing in rainfall intensity and the frequency of flood occurrence is also increased. To consider recent situation, Engineers use deterministic methods like a PMP(Probable Maximum Precipitation). If design storm wouldn't occur, increasing of design criteria is extravagant. In addition, the biggest structure cause trouble with residents and environmental problem. And then it is necessary to study considering probability of rainfall parameter in each sub-basin for design of water structure. In this study, stochastic rainfall patterns are generated by using log-ratio method, Johnson system and multivariate Monte Carlo simulation. Using the stochastic rainfall patterns, hydrological analysis, hydraulic analysis and 2nd flooding analysis were performed based on GIS for their applicability. The results of simulations are similar to the actual damage area so the methodology of this study should be used about making a flood risk map or regidental shunting rout map against the region.

• Journal of Korea Water Resources Association
• /
• v.42 no.2
• /
• pp.149-160
• /
• 2009

The objective of this study is to suggest parameter regionalization scheme which is integrated two multivariate statistical methods: principal components analysis(PCA) and hierarchical cluster analysis(HCA). This technique is to apply semi-distributed rainfall-runoff model on ungauged catchments. 7 catchment characteristics (area, mean altitude, mean slope, ratio of forest, water content at saturation, field capacity and wilting point) are estimated for 109 mid-sized sub-basins. The first two components from PCA results account for 82.11% of the total variance in the dataset. Component 1 is related to the location of the catchments relevant to the altitude and Component 2 is connected with the area of these. 103 ungauged catchments are clustered using HCA as the following 6 groups: Goesan 23, Andong 6, Imha 5, Hapcheon 21, Yongdam 4, Seomjin 44. SWAT model is used to simulate runoff and the parameters of the model on the 6 gauged basins are estimated. The model parameters were regionalized for Soyang, Chungju and Daecheong dam basins which are assumed as ungauged ones. The model efficiency coefficients of the simulated inflows for these three dams were at least 0.8. These results also mean that goodness of fit is high to the observed inflows. This research will contribute to estimate and analyze hydrologic components on the ungauged catchments.

• Plant Journal
• /
• v.13 no.4
• /
• pp.48-50
• /
• 2017

A program for analyzing the transient behaviors of industrial gas turbines was developed. Each component (compressor, combustor, turbine and ducts)of gas turbine is modeled as a fully module to enhance the expandability of the program. We used object-oriented programing for this purpose. The mass and energy balance equations are solved numerically by Multivariable Newton Raphson method. The characteristic maps for the compressor and turbine were used for predicting the performance of a gas turbine engine. Combustion in the combustor is assumed to be complete combustion. PID control is used to maintain constant rotational speed and turbine exhaust temperature by the control of the fuel flow rate and the changing of the compressor inlet guide vane angle at the same time. It was confirmed that stable control of the gas turbine was possible, even for a rapid load change.