• Journal of Korean Society of Steel Construction
• /
• v.14 no.3
• /
• pp.395-402
• /
• 2002

This study proposed a muti-objective optimum design method for rational optimizing of orthotropic steel deck bridges. This multi-objective optimum design method was found to be effective in optimizing multi-objective problems, considering cost and deflection functions. It may ve difficult to optimize orthotropic steel deck bridges using a conventional optimization, since the bridges have several parts and show complex structural behaviors. Therefore, the Pareto curve can be obtained by performing the multi-objective optimization for real orthotropic steel deck bridges, using the multi-level technique with excellent efficiency. A reasonable and economical design can be attained using the Parato curve in the cost and deflection functions of the bridge. Thus, more reasonable design values can be determined based on a comparison with those using a conventional design procedure.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.893-904
• /
• 2013

In this paper, a Kriging metamodel-based multi-objective optimization strategy in conjunction with an NSGA-II(non-dominated sorted genetic algorithm-II) has been employed to optimize the valve-plate shape of the axial piston pump utilizing 3D CFD simulations. The optimization process for minimum pressure ripple and maximum pump efficiency is composed of two steps; (1) CFD simulation of the piston pump operation with various combination of six parameters selected based on the optimization principle, and (2) applying a multi-objective optimization approach based on the NSGA-II using the CFD data set to evaluate the Pareto front. Our exploration shows that we can choose an optimal trade-off solution combination to reach a target efficiency of the axial piston pump with minimum pressure ripple.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.153-163
• /
• 2004

The main objective of this study is to develop a multi-objective fuzzy optimum design program of steel structures and to verify that the multi-objective fuzzy optimum design is more reasonable than the single objective optimum design in real structural design. In the optimization formulation, the objective functions are both total weight and deflection. The design constraints are derived from the ultimate strength of service ability requirement of AISC-LRFD specification. The structural analysis was performed by the finite element method and also considered geometric non-linearity. The different importance of optimum criteria were reflected with two weighting methods ; membership weighting method and objective weighting method. Thus, designers could choose rational optimum solution of structures with application of two weighting methods.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.6
• /
• pp.783-791
• /
• 2002

An improved formulation for multi-objective optimization was proposed. This formulation was applied to steel seismic loads. The multi-objective optimization problem was formulated with minimum structural weight, maximum strstability. The global criterion method was employed to find a rational solution closest to the ideal solution for the optimization problem using standard steel profile, To efficiently solve the optimization problem, the decomposition meth both system-level and element-level was used. In addition, various techniques including efficient reanalysis technique intermediate variables and sensitivity analysis using an automatic differentiation(AD) were incorporated. Moreover the reamong section properties fitted to the section profile used in order to link the system level and the element level. From numerical investigation, it could be stated that the proposed method will lead to the more rational design compared with one.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.5 s.48
• /
• pp.503-513
• /
• 2000

This study treats the criteria, considering the fuzziness occurred by optimization design. And we applied two weighting methods to show the relative importance of criteria. This study develops multi-objective optimization programs implementing plain stress analysis by FEM and discrete optimization design uniformaly. The developed program performs a sample design of 10-member steel truss. This study can carry over the multi-objective optimization based on total system fuzzy-genetic algorithms while performing the stress analysis and optimization design. Especially, when general optimization with unreliable constraints is cannot be solve this study can make optimization design closed to realistic with fuzzy theory.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.490-490
• /
• 2021

상수도 관망은 대표적인 사회기반시설로 수원으로부터 수용가에게 수질적으로 안전한 물을 안정하게 공급하는 것을 목표로 한다. 초기의 상수도 관망의 최적 설계는 비용만을 고려함으로써 미래의 불확실한 상황에 대한 대처가 매우 취약하고, 사용자의 다양한 요구를 충족시키지 못하였다. 또한, 유량과 안정적인 수질 공급을 고려하는 설계는 몇몇 비선형적 요소를 포함하고 있으며, 특히 사용자의 수요 패턴에 따른 잔류 염소 농도가 설계 기준에 부합하지 못하는 문제가 되는 경우 사용자의 심미적, 심리적 불편을 초래할 수 있다. 이는, 수질의 안전성과 직결되는 문제이다. 따라서 본 연구에서는 상수도 관망의 설계에 대하여 수질과 수리학적 특성을 고려한 상수도 관망 다목적 최적 설계를 수행하였다. 상수도 관망은 수질적인 측면을 고려하기 위해 수원에서 수용가까지 용수를 공급하는 과정에서 병원성 미생물을 소독하기 위하여 염소를 주입한다. 또한, 유리 잔류 염소의 평상시 기준을 (1.0-4.0mg/L) 유지하도록 규정하였다 (수도법 시행규칙 제22조의2). 하지만 사용자의 사용패턴, 체류 시간에 따라 잔류염소량이 달라진다. 따라서, 본 연구에서는 상수도 관망의 설계 비용과 염소 주입량을 동시에 설계 인자로서 고려하기 위해 Multi-objective Harmony Search를 적용하고, 그 결과를 분석하였다. 이러한 상수도 관망의 수질 인자와 설계 비용을 고려한 최적 설계안은 경제적 측면 뿐만 아니라 사용자의 수질 측면의 안전성을 충족하는 방안을 제시할 수 있다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.26-38
• /
• 2020

Mixture design of self-compacting concrete is a typical multi-criteria decision making problem and conventional mixture designs are based on the low level engineering method like trials and errors through iteration method to satisfy the various requirements. This study concerns with performing the straightforward multiobjective design optimization of economic SCC mixture considering relative importances of the various requirements and cost-effectives of SCC. Total five requirements of 28day compressive strength, filling ability, segregation stability, material cost and mass were taken into consideration to prepare the objective function to be formulated in form of the weighted-multiobjective mixture design optimization problem. Economic SCC mixture computational design can be given in a rational way which considering material costs and the relative importances of the requiremets and from the result of this study it is expected that the development of SCC mixtue computational design and the consequent univeral concrete material design optimization methodology can be advanced.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.2
• /
• pp.9-22
• /
• 2008

This paper presents an integrated optimal design technique of a hybrid structure-damper system for improving the seismic performance of the structure. The proposed technique corresponds to the optimal distribution of the stiffness and dampers. The multi-objective optimization technique is introduced to deal with the optimal design problem of the hybrid system, which is reformulated into the multi-objective optimization problem with a constraint of target reliability in an efficient manner. An illustrative example shows that the proposed technique can provide a set of Pareto optimal solutions embracing the solutions obtained by the conventional sequential design method and single-objective optimization method based on weighted summation scheme. Based on the stiffness and damping capacities, three representative designs are selected among the Pareto optimal solutions and their seismic performances are investigated through the parametric studies on the dynamic characteristics of the seismic events. The comparative results demonstrate that the proposed approach can be efficiently applied to the optimal design problem for improving the seismic performance of the structure.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.209-209
• /
• 2015

상수도 관망은 대표적인 사회기반시설로 수원으로부터 수용가에 이르기까지 안정적으로 유량을 공급하는 것을 목표로 한다. 상수도 관망의 최적설계는 요구되는 절점의 수압, 관로의 유속 등 수리학적 제약조건을 만족시키는 범위 안에서 비용을 최소화하는 설계안을 얻어내는 것을 목표로 시작하였다. 하지만 비용만을 고려한 과거의 상수도 관망 최적설계는 미래의 불확실한 조건에 매우 취약하고, 사용자의 다양한 요구를 충족시키지 못한다. 이 때문에 현대의 상수도 관망의 설계시 다양한 설계인자의 고려와 함께 효율적인 최적설계기법 적용의 필요성이 대두되고 있다. 따라서 본 연구에서는 상수도 관망 최적설계에 다양한 설계인자를 동시에 고려하기 위해 다목적 최적 설계기법인 Multi-objective Harmony Search 알고리즘을 적용하였다. 또한 다목적 최적설계의 효율성 증대를 위하여 매개변수 자동보정 기법 중 하나인 Parameter-Setting-Free (PSF) 기법(Geem and Sim, 2010)을 사용하였다. PSF 기법은 최적화 알고리즘의 매개변수 설정의 번거로움을 없애고, 반복수행을 통한 해 탐색이 진행됨에 따라 가장 효율적으로 작용하는 매개변수를 자동으로 설정하여 탐색효율을 강화하도록 고안된 기법이다. 본 연구에서는 제안된 기법을 실제 상수도관망의 최적설계에 적용하였고 그 결과를 분석하였다. 그 결과 제안된 기법을 통해 관망의 비용을 포함한 다양한 설계인자를 동시에 만족시키는 최적설계안을 효과적으로 도출 할 수 있었으며, 매개변수 자동보정 기법의 적용을 통해 해 탐색의 효율성과 편의성을 향상시킬 수 있었다.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.4
• /
• pp.409-416
• /
• 2009

The structural design problems are acknowledged to be commonly multi-criteria in nature. The various multi-criteria optimization methods are reviewed and the most efficient and easy-to-use Pareto optimal solution methods are applied to structural optimization of a truss and a beam. The result of the study shows that Pareto optimal solution methods can easily be applied to structural optimization with multiple objectives, and the designer can have a choice from those Pareto optimal solutions to meet an appropriate design environment.