• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.3
• /
• pp.76-89
• /
• 2014

The functions of urban park including health related benefit and climate adaptation and mitigation are expanding. However, in-depth research and discourse on the equitable distribution of expanded park function has been limited so far. Following research suggests Green Welfare concept to reflect distributive equity and multifunctionality in the process of urban park policy development and execution. This study developed park welfare indices to analyze disparities of neighborhood urban park(NUP) distribution viewed from green welfare by literature review. The findings analyzed through the Correlation Analysis and Cluster Analysis by SPSS 18.0. The results of the study are as follows. First, green welfare is defined as "to receive equitable benefits and participate in the delivery process of green services which are promoting health and securing safety from climate change risks for every citizen by life cycle regardless of socioeconomic status". Second, NUP per person in Seoul indicate meaningful differences by socioeconomic and environmental status of Seoul administrative districts. Park welfare indices correlated to NUP per person were shown population density(negative), percentage of individuals $aged{\geq}65$(positive), percentage of self-reliance of local finance(positive), flood and air pollution vulnerability by climate change(negative). Third, the cluster analysis identifies three significant clusters that indicate differences of park welfare level. Thus, it was found that NUP in Seoul from a green welfare perspective was provided disproportionately. Future urban park policy in Seoul was required equitable distribution of multifunctionality of park beyond quantitative expansion, and priority consideration should be given to park service consumer.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.226-229
• /
• 2000

일반적으로 안경집은 일회적으로 사용하고 버리는 것이라 생각하는 사람이 많다. 안경집을 주로 생산하고 있는 대동사출금형과의 공동 노력으로 다기능성 안경집을 개발한 것을 소개한다. 일상적인 고정관념을 버리면 편리하고 기능성이 높은 제품을 만들 수 있다는 신념으로 개발한 결과 어린이나 젊은이들이 졸아할 문방구 겸용 안경집을 개발할 수 있었다. 완구는 소비자가 일상적으로 많이 접촉하기 때문에 곰팡이나 세균이 서식하지 않도록 항균 세라믹을 이용하여 항균처리하였다. 또한 상온에서 인체에 이로운 원적외선이 방출될 수 있도록 고안하였다. 단순한 색상의 무료함을 줄이기 위하여 어린이나 젊은이들이 좋아하는 상용화된 캐릭터를 사용하여 제품의 다양화를 꾀하였고, 4개의 조각으로 만들어 어린이들이나 젊은이들이 조립할 수 있도록 하여 흥미를 더할 수 있도록 하였다. 또한 소비자들이 선호하는 색을 알아보기 위하여 기존의 안경집을 활용하여 색상성호도 조사를 실시하였다. 젊은층은 자극적이고 화려한 색깔을 선호하는 한편 기성세대는 무난한 색깔을 선호하였다. 또한 콘택트 렌즈를 착용하는 경우에도 안경을 사용하는 경우가 많다. 이 경우 콘택트 렌즈와 안경을 따로 가지고 다녀야 하는 불편이 있다. 이에 착안하여 안경과 콘택트 렌즈를 겸용으로 사용하는 소비자를 위하여 안경과 콘택트 렌즈를 동시에 담을 수 있는 안경집을 개발(실용신안 출원번호:8928)하였다. 이 고안은 콘택트 렌즈를 안경집에 보관하기 위한 것으로 콘택트렌즈가 식염수에 잠겨 보관된 렌즈캡을 안경집내에 별도로 삽입되는 케이스에 수납하도록 구성하여 안경과 함께 콘택트 렌즈를 보관해 휴대하는 안경집 보관용 콘택트 렌즈 케이스에 관한 것으로 이것의 특징은 뚜껑이 열리고 닫히도록 구성된 안경집에 있어서 뚜껑 안쪽에 거울이 마련되고 뚜껑이 연결되는 선단부 안쪽에 끼움홈과 체결홈이 형성된 체결부를 갖는 안경집과 이것에 결합되는 체결구가 마련되어 개폐되는 커버가 형성된 케이스로 구성된다.로 금형설계 및 제작기간을 단축하고자 한다.ere demonstrated in rats after i.c.v., intraperitoneally and orally administration, respectively. The antiepileptical effects by the combination of compounds from ginseng; were compared with the iuluence of Rg1, Rb1, Rc and with the well known antiepileptical drugs such as carbamazepine, valproic acid. The base for the research is obtained by using the WAG/Rij strain (Luijtelaar, Coenen, Kuznetcova), an excellent genetic model for human generalized absence epilepsy. The improving action of gensinosides was effectively demonstrated on the model of electrical kindling of amygdala of WAG/Rij rats with genetically determined absences, and the influences of ginsenosides on the slow wave discharges have also been being investigated. The different characteristics of a kindling process exerted in the sex-different region of the amygdala and demonstrated that the level of sex steroids and content of neurosteroids in amygdaloid tissue ca

• Korean Journal of Microbiology
• /
• v.51 no.3
• /
• pp.271-279
• /
• 2015

Lactoferrin (LF) is a multifunctional, iron-binding glycoprotein found in physiological secretions of mammals. LF shows antibacterial, antiviral and antifungal activities. In the present study, a gene encoding the N-terminal lobe of human lactoferrin (hLF) was isolated, cloned and expressed in methylotrophic yeast, Pichia pastoris. The recombinant hLF-N (rhLF-N) protein was secreted into the culture medium at the level of $458{\mu}g/ml$ in 3 L fermentor. The size of purified hLF-N was estimated as 35 kDa when analyzed by SDS-PAGE and western blotting. The rhLF-N was further confirmed by immunodiffusion using the anti-hLF polyclonal antibody. The expression profile analysis by qRT-PCR showed that the relative mRNA expression of rhLF-N was maximal after 2-3 days of methanol induction and reduced gradually at 4 days. The purified rhLF-N showed broad antibacterial activities against the pathogens such as Staphylococcus aureus, E. coli, Pseudomonas aeruginosa, Burkholderia cepacia, and Salmonella typhimurium. However, rhLF-N showed relatively lower activity when compared to peptides derived from LF. In spite of this weak activity, the rhLF-N expressed in P. pastoris might be more advantageous for the industrial application, because rhLF-N is secreted into the culture medium and the production can also be increased by optimization of culture conditions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.185-185
• /
• 2012

중공 발광 나노 물질은 특유의 구조적 특성(낮은 밀도, 높은 비표면적, 다공성 물질, 낮은 열팽창계수 등)과 광학적 성질을 이용하여 디스플레이 패널, 광결정, 약물전달체, 바이오 이미징 라벨 등의 다양한 적용이 가능하다. 이러한 적용에 있어 균일한 크기와 형태의 중공 입자는 필수 조건으로 여겨진다. 지금까지 합성된 중공 발광 입자에는 BaMgAl10O17 : Eu2+-Nd3+, Gd2O3 : Eu3+, $EuPO_4{\cdot}H_2O$과 같은 것들이 있으나 크기 조절이 어렵고, 그 균일성이 확보되지 못하였다. 균일한 크기의 중공 발광 입자를 만들기 위해 SiO2나 emulsion을 템플릿으로 이용하여 황화카드뮴, 카드뮴 셀레나이드 중공 입자를 합성한 예가 있으나, 양자점의 독성으로 인하여 바이오분야 응용에는 적합하지 않다. YAG는 모체로써 형광체에서 가장 많이 이용되는 물질로, 화학적 안정성과 낮은 독성, 높은 양자 효율 등 많은 장점을 갖고 있다. 특히 세륨이 도핑된 YAG형광체의 경우 WLED, 신틸레이터, 바이오산업에 적용이 가능하다. 그러나 지금까지 중공 YAG:Ce3+형광체를 합성한 예가 없었다. 본 연구에서는 단분산 수화 알루미늄 (Al(OH)3) 입자 위에 세륨이 도핑 된 이트륨 베이직 카보네이트 ($Y(OH)CO_3$)를 균일하게 코팅한 후 열처리를 하여 균일한 크기의 Y3Al5O12:Ce3+(YAG) 중공 입자를 합성하였다. 열처리 온도에 따른 고분해능 투과 전자 현미경(HRTEM), X-선 회절(XRD), 고분해능 에너지 분광법(HREDX) 분석결과, 중공 YAG: Ce3+입자는 Kirkendall 효과에 의해 형성됨을 확인하였다. 전계방사형 주사 전자 현미경(FE-SEM) 측정을 통해, 열처리 후에도 입자의 크기와 형태가 균일함을 확인하였으며, 공초점 현미경 관찰을 통해 중공 형태를 명확히 확인 할 수 있었다. Photoluminescence (PL) 분광법과 형광 수명 이미징 현미경(FLIM)을 이용한 광 특성 분석결과, 합성된 입자는 400-500 nm에서 흡수 파장 (456 nm에서 최대 강도)과 500-700 nm 범위의 발광 파장(544 nm에서 최대 강도)을 나타냈고, 상용 YAG: Ce3+(70 ns)에 준하는 74 ns의 잔광 시간(decay time)이 측정되었다. 단분산 수화 알루미늄 입자의 크기를 조절하여 최종 합성된 YAG: Ce3+의 크기를 조절할 수 있었다. 지름 약 600 nm의 Al(OH)3를 사용한 경우, $1,300^{\circ}C$에서 열처리를 한 후 평균 지름 590 nm의 중공입자를 합성하였고, 약 170 nm의 Al(OH)3를 이용하여, 더 낮은 온도인 $1,100^{\circ}C$에서의 열처리를 통해 평균지름 140 nm의 중공 YAG: Ce3+입자를 합성하였다. 본 연구를 통하여 합성된 균일한 크기의 YAG 중공입자는 LED와 같은 광전변환 소자 및 다기능성 바이오 이미징 등의 나노바이오 소자 분야에 활용될 수 있음이 기대된다.

• Journal of Environmental Policy
• /
• v.12 no.1
• /
• pp.37-58
• /
• 2013

In recently, the low impact development(LID) is discussed at various fields being related to urban stormwater, non-point source pollution, and quality of life. It is understood as an integrated development tool to induce sustainable development with various value-social, economic, and aesthetic. As concerning the development of waterfront area, the low impact development is interested in environmental planning. But the planning process and factors are not considered in precedent research. This study has two purposes. The one is to understand the planning process and factors of low impact development from literature review. The other is to apply the planning factors using case study and to know the effect of low impact development as the simulation plan. The simulation plan is based on some landuse planning. It is divided into the setting the region for environmental protection and the function of public facilities, spatial planning for enlarging permeable area, and spatial planning for circulation of water. The simulation model uses the LIDMOD2. The 14 planning factors of low impact development is applied to case region. And the effect is about 7~10 percent in reduction of nonpoint source pollution and surface runoff.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.697-702
• /
• 2017

A preliminary study was carried out to investigate the feasibility of replacing honeycomb cores with pyramidal truss cores in the doors of urban transit railway vehicles. The doors in current operation are sandwich structures comprising a honeycomb core and reinforcements between two facesheets. The structural requirements of doors for urban transit vehicle are specified in the KRS and KRT and standards, according to which the deflections from three-point bending tests must be limited. To this end, two types of pyramidal truss cores with equivalent mass to a honeycomb core were designed. The structural stiffness of doors with pyramidal truss cores and honeycomb cores were numerically calculated via finite element analysis. The three-point bending models were constructed and simulated, and then the calculated deflections were compared with the requirements specified in the regulations. The results show that doors with pyramidal truss cores satisfied the stiffness requirements, although their deflections were 2.5% larger than that of the honeycomb cores. Therefore, the pyramidal truss cores could replace the aluminum honeycomb cores, and their multi-functional capability could be exploited.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.7
• /
• pp.729-734
• /
• 2008

The higher valence state of iron i.e., Fe(VI) was employed for the treatment of Cu(II)-EDTA in the aqueous/waste waters. The ferrate(VI) was prepared through wet oxidation of Fe(III) by sodium hypochlorite. The purity of prepared Fe(VI) was above 93%. The stability of Fe(VI) solution decreased as solution pH decreased through self decomposition. The reduction of Fe(VI) was obtained by using the UV-Visible measurements. The dissociation of Cu(II)-EDTA complex through oxidation of EDTA using Fe(VI) and subsequent treatment of organic matter and metal ions by Fe(III) reduced from Fe(VI) in bench-scale of continuous flow reactor were studied. The removal efficiencies of copper were 69% and 79% in pH control basin and reactor, respectively, at 120 minutes as retention time. In addition, Cu(II)-EDTA in the reactor was decomplexated more than 80% after 120 minutes as retention time. From this work, a continuous treatment process for the wastewater containing metal and EDTA by employing Fe(VI) as muluti-functional agent was developed.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.12
• /
• pp.25-36
• /
• 2017

This research was conducted to investigate the removal characteristics of heavy metals and sulfate ion from acid mine drainage (AMD) by multi-functional zeolite-slag ceramics (ZS ceramics), in which natural zeolite and converter slag were mixed and calcined at high temperature. The batch test showed that the removal efficiency of heavy metals by pellet-type ZS ceramics increased as the mixing weight ratio of converter slag to natural zeolite increased. The optimal mixing ratio of natural zeolite to converter slag for the removal of heavy metals and sulfate ion from AMD was observed to be 1:2~1:3. The adequate calcination temperature and time of ZS ceramics for the treatment of AMD were found to be $600{\sim}800^{\circ}C$ and 2 hours, respectively. The removal test of heavy metals and sulfate ion from AMD by the ZS ceramics prepared in optimal condition exhibited very high removal efficiencies close to 100% for all heavy metals (Al, As, Cd, Cu, Fe, Mn, Pb, Zn) and 77.1% for sulfate ion. The experimental results in this study revealed that the ZS ceramics could function as an effective agent for the treatment of AMD.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.25 no.3
• /
• pp.69-77
• /
• 2019

Agar-based nanocomposite films were prepared by incorporation of zinc oxide nanoparticles (ZnONP) and grapefruit seed extract (GSE). The composite films were characterized using FT-IR, UV-visible spectroscopy and thermalgravimetric analysis (TGA). The composite films showed light absorption peaks at 220 and 380 nm, characteristic for GSE and ZnONP, respectively. The UV-light transmittance of the agar film was markedly reduced from 54.4 ± 1.3% to 5.8 ± 2.5% with little sacrifice of transparency when 3 wt% ZnONP and 5 wt% GSE were added. The mechanical and water vapor barrier properties increased slightly though they were not significant statistically by the addition of ZnONP and GSE. The nanocomposite films showed stronger antibacterial activity against L. monocytogenes than E. coli O157: H7 and the antibacterial activity was affected by bacterial types as well as concentrations of ZnONP and GSE. The nano-composite film incorporated with 3 wt% of ZnONP and 5 wt% of GSE exhibited strong antibacterial activity against Listeria monocytogenes and E. coli O157: H7. The results indicate that 3 wt% of ZnONP and 5 wt% of GSE are the optimal concentrations for producing functional agar/ZnONP/GSE composite films.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.230-236
• /
• 2019

Recently, issues related to the quality of concrete have continuously resulted in surface quality problems, such as the exfoliation of concrete surfaces due to the cost reduction of cement and poor quality fine aggregate, scaling of surfaces caused by laitance, and plastic shrinkage cracks. Prompted by social issues, the application of a photo catalyst to road structures is being attempted to solve the environmental problems caused by fine dust and automobile exhaust. In this study, chemical admixtures were developed to improve the surface quality of concrete and to apply and distribute titanium dioxide in nanoscale sizes to provide basic data for the development of a photocatalyst-curing agent. As a result of the experiment, silicon and silane were reviewed as a raw material as a curing agent to develop a high performance curing agent with better film performance than conventional curing agents because they could form a film quickly on a fresh concrete surface. The distributed stability of the ultrasonic disperser showed the best performance through an outdoor test for four weeks to review the dispersion measures for the application of nanomaterials.