• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.200-200
• /
• 2003

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.299-302
• /
• 2000

임의의 매질에서 음파의 전파는 매질의 고유물성 및 구조적 특성에 영향을 받게 된다. 본 연구는 의공학에서 관심을 가지는 골다공증 진단의 기초 물리적 음향 특성을 이해함에 목적을 두고 있다. 따라서 구조적 특성의 중요한 요소인 매질의 다공성에 초점을 두고 있으며, 비강체의 다공성 물질로써 루사이트 판에 원통 형태의 관을 균일하게 배열시켰고 이 관들의 배열을 다공성 구조로 간주하였다. 다공도는 본 연구에서 의미 있는 범위, 약 $0\%-30\%$에 제한하였으며, 다공도에 따른 음향 특성 변화를 관찰하기 위하여 다공도의 차이를 두었고, 관의 직경에 따른 음향 특성 변화를 관찰하기 위하여 같은 다공도와 두 종류의 관의 크기를 갖는 다공성 루사이트를 제작하였다. 실험은 수중에서 음파의 입사각에 대한 의존도를 배제하기 위하여 수직 입사에 대하여 수행하였고 사용된 주파수는 880kHz이다. 다공도 및 관의 크기의 변화에 따른 음파의 투과 계수의 변화를 관측하여 다공도 및 관의 크기의 변화에 따른 음향특성 변화의 상관 관계를 고찰함으로써 골다공증 진단에의 응용 가능성을 연구하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.732-739
• /
• 2011

In recent years, the crisis of energy is growing seriously and also the contamination of ecology has been reverberated as international problem. The social concerns on energy crisis have been growing for the last several years and also the interests in new and renewable energy have been increased. Therefore, in order to solving these problems, this study has dealt with the solar air collector with perforated endothermic panel to increase the indoor temperature. And also, the PV panel for running indoor air circulating fan has used to increase the convective heat transfer. This study is consisted with experiment and numerical parts. From this study, the experimently result is indicated that the inlet air temperature is increased up to 45[$^{\circ}C$]. This temperature is enough to heat the indoor air during winter season. And the numerical calculation results revealed that the mixing effect of convection is increased with increasing in fan circulating power.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.2
• /
• pp.83-89
• /
• 2015

The transmission loss(TL) has been widely used as the acoustic performance index of industrial mufflers. Industrial mufflers usually consist of several partitions with perforated plate. In this study, firstly, the computational model for a typical industrial muffler was performed and validated by comparing with the experimental results. Secondly, the effects of the porosity of the perforated plates on the acoustical TL were investigated and the database of the tendencies were set up. Finally, on the basis of these tendencies, the modified muffler with better TL than conventional one could be suggested.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.2
• /
• pp.156-161
• /
• 2007

A set of experiments of counter-current flow limit (CCFL) was performed to improve the drawbacks of Wallis' correlation which neglected the effects of channel size, channel length, injection method and the boundary conditions at the inlet of liquid and gas phase. In this study, CCFL was observed by changing the shape of porous plate using air and water. The results show that as the size of porous increases, CCFL with a round shape of the porous plate start to disappear, In this study, the CCFL correlation was calculated and the corresponding CCFL map was developed based on the experimental results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.653-658
• /
• 2001

In this study, a new practical method of predicting the sound absorption coefficient for multiple perforated-plate sound absorbing system was developed using transfer matrix method. In order to validate the proposed method, the absorption coefficients calculated by transfer matrix method for single perforated plate were first compared with the absorption coefficients measured by SWR method according to different porosity, hole diameter, and thickness of the perforated plate. Based on the comparison results, transfer matrix method was further applied to double and triple perforated plates to evaluate the absorption coefficients. The experimental results showed that the absorption coefficients from transfer matrix method generally agreed well with the corresponding absorption coefficients from SWR method. However, due to the limitations of the impedance model used in this study, the measured values were differed with the calculated values for small porosity, hole diameter, and thickness in size of the perforated plate indicating the need of impedance model development for multiple perforated-plate sound absorbing system covering wide ranges of porosity, hole diameter, and thickness of the perforated plate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.1
• /
• pp.212-221
• /
• 2001

This paper deals with the design techniques for underwater acoustic basin. An underwater acoustic basin is needed for test and calibration of acoustic sensors, acoustic digital communication system, acoustic measurement system, and underwater image data telemetry system. KRISO(Korea Research Institute of Ships and Ocean Engineering) have planned the construction of an underwater acoustic tank from 1999 to 2001 through internal project. We studied about absorbtion characteristics of a porous re-cycled rubber which is selected as a absorption materials and designed absorption plate with wedge shape. The simulation of reflection analysis along the wedge angle for wedged type plate was presented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.371-377
• /
• 2000

This paper deals with the design techniques for underwater acoustic basin. An underwater acoustic basin is needed for test and calibration of acoustic sensors, acoustic digital communication system, acoustic measurement system, and underwater image data telemetry system. KRISO(Korea Research Institute of Ships and Ocean Engineering) have planned the construction of an underwater acoustic tank from 1999 to 2001 through internal project. We studied about absorbtion characteristics of a porous re-cycled rubber which is selected as a absorption materials and designed absorption plate with wedge shape. The simulation of reflection analysis along the wedge angle for wedged type plate was presented.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.155-156
• /
• 2002

관성임팩터(inertial impactor)는 입자의 관성을 이용하여 기류로부터 입자를 분리하는 장치이며 입자를 입경별로 포집하는데에 높은 효율을 가지며 작동하기에 간편하므로 널리 사용되고 있다. 하지만, 임팩터는 입자의 되튀김(bouncing), 재유입(reentrainment), 그리고 과적(overload)과 같은 입자와 충돌판의 상호작용에 의한 문제점이 있다. 일반적으로 이런 문제점을 해결하기 위해서는 충돌판의 표면에 그리스(grease) 또는 오일(oil)을 코팅하여 사용하는 방법이 있다. (중략)

• Journal of Power System Engineering
• /
• v.11 no.2
• /
• pp.20-25
• /
• 2007

The performance of air-to-air heat exchanger has been investigated with rotating porous plates newly developed in this study. With an equal interval of 18 mm, the rotating porous plates are installed inside the heat exchanger where the hot and cold airs enter at opposite ends. When flowing in opposite directions by the separating plate installed in the center of the rotating porous plates, the airs give and receive the heat each other. Dry bulb temperature is set by adjusting heat supply at heater. In order to measure the temperature distribution of the hot air side inside heat exchanger, the thermocouples are inserted between the plates. The first location of thermocouple is 10mm downstream from the inlet of heat exchanger, and succeeding ten locations are aligned at an equal interval of 18mm. From the experiment of air-to-air heat exchanger with the rotating porous plates, the heat transfer rate increased as both air flow rate and RPM of the rotating porous plate increased. It was found that the overall heat transfer coefficient increased with the increase in RPM of porous plate at the conditions of the same air flow rate.