• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1092-1099
• /
• 2022

Research on exhaust aftertreatment devices to reduce air pollutants and greenhouse gas emissions is being actively conducted. However, in the case of the particulate matters/nitrogen oxides (PM/NOx) simultaneous reduction device for ships, the problem of back pressure on the diesel engine and replacement of the filter carrier is occurring. In this study, for the optimal design of the integrated device that can simultaneously reduce PM/NOx, an appropriate standard was presented by studying the flow inside the device and change in back pressure through the inlet/outlet pressure. Ansys Fluent was used to apply porous media conditions to a diesel particulate filter (DPF) and selective catalytic reduction (SCR) by setting porosity to 30%, 40%, 50%, 60%, and 70%. In addition, the ef ect on back pressure was analyzed by applying the inlet velocity according to the engine load to 7.4 m/s, 10.3 m/s, 13.1 m/s, and 26.2 m/s as boundary conditions. As a result of a computational fluid dynamics analysis, the rate of change for back pressure by changing the inlet velocity was greater than when inlet temperature was changed, and the maximum rate of change was 27.4 mbar. This was evaluated as a suitable device for ships of 1800kW because the back pressure in all boundary conditions did not exceed the classification standard of 68mbar.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.19.2-19.2
• /
• 2009

금속을 용해 응고시킬 때 생성되는 소위, 주조 결함이나 소결금속 내의 기공은 재료의 성능이나강도를 현저하게 낮추는 결함으로서 예전부터 기피되어 왔다. 또한, 재료공정에있어서도 여하의 기공이나 기포가 없는 치밀한 고강도 및 고기능성 재료를 개발하는 것에 최대한의 주의와 관심을 기울여 왔다. 그렇지만, 우리가 자연계의 천연물이나 인공물을 둘러보면 그 대부분이다공질임을 쉽게 눈치챌 수 있다. 예를 들어 목재, 지엽등의 생물을 시작해서 콘크리트 등의 인공물, 우리 체내의 뼈도 전형적인 다공질구조로 구성되어 있다. 이러한 구조로부터 재료의 재질제어 이외에 구조제어라는 새로운 어프로치를 고려할 수 있고, 최근 들어, 금속재료에 있어서도 이러한 다공질구조에 관한 연구가활성화되어 충격흡수재, 생체재료, 베어링재료 등의 다양한응용이 전개되고 있다. 특히, 원주상의 방향성 기공을 갖는 로터스금속은 기존의 복잡한구조의 다공질금속보다 뛰어난 기계적 성질을 갖는다. 이러한 다공질금속은 일방향응고할 때 생성하는 과포화가스원자를 석출시켜 기공을 일방향으로 성장시킨다. 즉, 융점에서의 고상과 액상의 가스 용해도 차를 이용하는 것으로서 응고시에 고용할 수 없는 가스원자가 기공을 형성한다. 이와같이 제조한 방향성 다공질금속은 BT (인플란트, 생체적합성, 저탄성, 경량), ST (초음속기엔진부품, 경량), IT (고성능수냉모듈), ET(고온촉매, 필터)의 분야로의 응용이 기대된다. 본 강연에서는 방향성 다공질금속의 제조법, 특성 및 응용을 포함하여그 동안의 연구성과 및 앞으로의 과제 등을 소개하고자 한다.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.539-546
• /
• 2017

In this study, an outstanding anion exchange chemical filter was prepared for acidic gas removal. Commercial anion exchange resin was attached to polyurethane (PU) foam by using different types of pressure sensitive adhesive (PSA). The water and chemical resistance and also adhesive elongation were investigated. Also, the behavior of HCl and HF adsorption was evaluated as functions of the initial concentration and flow rate. ATE-701, AT-4000C and HCA-1000 showed 900, 1,500% and 2,400% of the elongation, respectively. It was confirmed that the desorption ratio of HCA-1000 was less than 6% and had excellent durability in water and chemical resistance tests. The adsorption occurred faster as the concentration and flow rate of HCl and HF increased. But 100% adsorption equilibrium occurred after 110 minutes, regardless of the concentration and flow rate. In addition, SEM morphology showed that the adhesive was uniformly dispersed, while the porous structure of the ion exchange resin was maintained, and the chemical filter exhibited excellent durability for the adsorption/desorption process.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.453-458
• /
• 2000

The permeability of oxygen and nitrogen was investigated from the polymeric LB films containing imidazole-metal ion complexes and compared with its corresponding cast films on porous membrane filters. The amphiphilic polymer, poly(N- (2-(4-imidazolyl)ethyl)-maleimide-alt-1-octadecene) (IM-O), was synthesized by reaction of poly(maleic anhydride-alt-1-octadecene) with histamine. The IM-O nonolayer showed high stability on Fe (III) ion-containing subphase. The molecular structure in the LB films was investigated by means of FT-IR spectroscopy. The metal ion concentration incorporated into the LB films was determined by means of XPS measurements. The mechanical stability and uniformity of the LB films on porous substrates were indirectly evidenced by SEM observation. The LB and cast films showed more or less higher selectivity toward nitrogen, and high permeability was found to both the oxygen and nitrogen.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.464-468
• /
• 2005

산업활동으로 인해 발생하는 슬래그 등의 폐기물을 적절히 처리하는 방법으로서는 저비용 처리형태와 자연계에서 슬래그 등의 특성을 고려한 Filter 기능을 수행할 수 있도록 수질이 악화된 하천이나 정체수역에 투입시켜 수질을 개선시킬 수 있는 방법의 도입이 필요하다. 현재 POSCO에서 발생하는 슬래그와 폐콘크리트의 화학적 성분은 주로 $CaO,\;SiO_2,\;Al_2O_3,\;Fe_2O_3$ 등으로 이루어져 있으며, 침전유발물질 및 흡착성물질이 공존하고 있다. 다공질 형태의 비표면적을 가지고 있어서 정화용 필터로 이용하기에 좋은 이점을 가지고 있다. 슬래그나 폐콘크리트를 Mattress/Filter 채움재 및 수질정화용 여재로 활용하면 폐기물처리, 자원 재활용 그리고 수질 환경 개선의 세 가지 효과를 동시에 얻을 수 있는 방법이 된다. 본 연구에서는 슬래그와 폐콘크리트를 활용한 정체수역에서 정화시스템의 정화특성을 조사하기 위하여 유입수와 유출수의 pH, 용존산소, 질소, 인 등을 측정하여 비교하였다. 수질개선을 위한 Mattress/Filter 시스템의 기본개념은 하천의 오염된 물이 Mattress/Filter의 공극사이를 통과하면서 채움재에 형성된 생물막이 수질 개선과정에서 나타나는 접촉작용, 생물 흡착작용, 생물산화의 분해작용 등을 촉진시키도록 하였다. Mattress/Filter를 이용한 수중 수질개선시스템에서 채움재로 제철폐기물인 슬래그와 건설폐기물인 폐콘크리트를 사용함으로써 Mattress/Filter의 다공성 및 넓은 표면적이라는 특성에 따른 물리적$\cdot$화학적$\cdot$생물학적 작용이 촉진되고 있음을 확인할 수 있었으며, 그 결과 정체수역에 설치한 Mattress/Filter는 다공질 속에서 쉽게 생물막을 형성시키고 유기물의 흡착을 촉진시켜 오염물질을 정화하는데 필요한 자정작용의 효과 증대와 수질개선을 촉진시킬 수 있는 자연생태적 하천정화시스템임을 확인할 수 있었다.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.2
• /
• pp.143-152
• /
• 2017

As weathering processes, micro-cavities are formed on the surface of rocks, and in particular, the porous structure is increased in feldspar. Adsorption and antibacterial tests were carried out to clarify the environmental function of porous feldspar porphyry. Almost all the heavy metals were adsorbed in the feldspar filter and the adsorption rate could be controlled by changing the filter length. The shake flask method of fabric coated with 5% and 7% feldspar powder showed very high antibacterial activity of 98% and 99.9%, respectively. The cation exchange capacity at a particle size of $10{\mu}m$ was 114.63 meq/100g probably due to the porous structure. The potential value of porous feldspar porphyry as a resource is sufficient based on the results of the experiment.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.1
• /
• pp.21-27
• /
• 2005

This study was conducted to evaluate the biofiltration treatment characteristic for benzene vapor gas. Compost and calcium silicate porous material were used as biofilter fillers. Gas velocity and empty bed retention time were 15 m/hr and 4 min, respectively. Benzene gas removal efficiency of P-Bio (calcium silicate porous material with inoculation) was the highest and maintained in over 98%. After shock input of benzene gas, the removal efficiency of P-Bio biofilter was recovered within 2 days, while 5 days were taken in CP-Bio (compost + calcium silicate porous material mixture with inoculation) and CP (compost + calcium silicate porous material mixture without inoculation) biofilters. The removal efficiency of P-Bio biofilter was near 100% in the loading rate of <$85g/m^3$(filling material)/hr, It was shown that the maximum elimination capacities of P-Bio, CP-Bio, and CP biofilters were 95, 69, and $66\;g/m^3$(filling material)/hr, respectively. Microbial number of P-Bio, which the number was the lowest at start-up, was 3 orders increased on operational day 48. $CO_2$ was generated greatly in order of P-Bio, CP-Bio, and CP biofilters.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.11
• /
• pp.93-101
• /
• 2011

High quality X-ray computed microtomography (micro-CT) imaging of internal microstructures and pore space in geomaterials is often hampered by some inherent noises embedded in the images. In this paper, we introduce image calibration techniques for removing the most common noises in X-ray micro-CT, cupping (brightness difference between the periphery and central regions) and ring artifacts (consecutive concentric circles emanating from the origin). The artifacts removal sequentially applies coordinate transformation, normalization, and low-pass filtering in 2D Fourier spectrum to raw CT-images. The applicability and performance of the techniques are showcased by describing extraction of 3D pore structures from micro-CT images of porous basalt using artifacts reductions, binarization, and volume stacking. Comparisions between calibrated and raw images indicate that the artifacts removal allows us to avoid the overestimation of porosity of imaged materials, and proper calibration of the artifacts plays a crucial role in using X-ray CT for geomaterials.

• Korean Journal of Materials Research
• /
• v.33 no.7
• /
• pp.285-294
• /
• 2023

Porous ceramics are used in various industrial applications based on their physical properties, including isolation, storage, and thermal barrier properties. However, traditional manufacturing environments require additional steps to control artificial pores and limit deformities, because they rely on limited molding methods. To overcome this drawback, many studies have recently focused on fabricating porous structures using additive manufacturing techniques. In particular, the binder jet technology enables high porosity and various types of designs, and avoids the limitations of existing manufacturing processes. In this study, we investigated process optimization for manufacturing porous ceramic filters using the binder jet technology. In binder jet technology, the flowability of the powder used as the base material is an important factor, as well as compatibility with the binder in the process and for the final print. Flow agents and secondary binders were used to optimize the flowability and compatibility of the powders. In addition, the effects of the amount of added glass frit, and changes in sintering temperature on the microstructure, porosity and mechanical properties of the final printed product were investigated.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.538-543
• /
• 2008

Recently a nano-scale diamond is possible to manufacture forms of powder(below 100 nm) by new processing of explosion or deposition method. Using a sintering of nano-scale diamond is possible to manufacture of grinding tools. We have need of a processing development of coated uniformly inorganic to prevent an abnormal grain growth of nano-crystal and bonding obstacle caused by sintering process. This paper, in order to improve the sintering property of nano-scale diamond, we coated ZnO thin films(thickness: $20{\sim}30\;nm$) in a vacuum by ALD(atomic layer deposition) Economically, in order to deposit ZnO all over the surface of nano-scale diamond powder, we used a new modified fluidized bed processing replaced mechanical vibration effect or fluidized bed reactor which utilized diamond floating owing to pressure of pulse(or purge) processing after inserted diamond powders in quartz tube(L: 20 mm) then closed quartz tube by porosity glass filter. We deposited ZnO thin films by ALD in closed both sides of quartz tube by porosity glass filter by ALD(precursor: DEZn($C_4H_{10}Zn$), reaction gas: $H_2O$) at $10^{\circ}C$(in canister). Processing procedure and injection time of reaction materials set up DEZn pulse-0.1 sec, DEZn purge-20 sec, $H_2O$ pulse-0.1 sec, $H_2O$ purge-40 sec and we put in operation repetitive 100 cycles(1 cycle is 4 steps) We confirmed microstructure of diamond powder and diamond powder doped ZnO thin film by TEM(transmission electron microscope) Through TEM analysis, we confirmed that diamond powder diameter was some $70{\sim}120\;nm$ and shape was tetragonal, hexagonal, etc before ALD. We confirmed that diameter of diamond powders doped ZnO thin film was some $70{\sim}120\;nm$ and uniform ZnO(thickness: $20{\sim}30\;nm$) thin film was successfully deposited on diamond powder surface according to brightness difference between diamond powder and ZnO.