• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.619-623
• /
• 2000

Alumina membrane was prepared by sol-gel coating method using boehmite powder(${\Upsilon}-AlOOH$). The supported and the unsupported alumina membrane were fabricated to investigate the phase transformation and change of microstructure. It is important to control the homogeneous pore size and distribution in application of filtering process. The ${\theta}-to\;{\alpha}-AL_2O_3$ phase transformation (XRD) and the change of microstructure was investigated using scanning electron microscopy(SEM). XRD patterns showed that the supported membrane had $100^{\circ}C$ higher ${\theta}-to\;{\alpha}-AL_2O_3$ transformation temperature compared to the unsupported membrane. The similar effect was also observed for microstructural change of the membrane.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.204-204
• /
• 2003

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.11a
• /
• pp.49-49
• /
• 2000

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.04b
• /
• pp.38-38
• /
• 2002

• Electrical & Electronic Materials
• /
• v.26 no.10
• /
• pp.3-9
• /
• 2013

• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.273-279
• /
• 2006

This study explored the possibility of porous Si (PS) formed by indirect electrode anodization used for effective isolation material for radio frequency integrated circuits (RFIC). We investigated the effect of current density and reaction time on the porosity size and depth, and X-ray diffraction of bulk Si and porous Si to evaluate the change in lattice parameter. Porosity size and depth usually increases with an increase in the current density and reaction time. PS increases the lattice parameter of Si compared to the bulk Si which causes the compressive stress of around 8 MPa. PS formed by the method is believed to be suitable for isolation material for RFIC because it is simple process as well as good compatibility to Si VLSI process.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.4
• /
• pp.168-174
• /
• 2005

In this study, the numerical simulation of drying processes for porous materials is performed by employing the hierarchical multi-scale modeling and the nano-scale material properties obtained from the molecular dynamics simulation. The multi-scale simulation system is set up using pre- and post-processors and the drying process of electric porous ceramic insulator is simulated. The temperature, moisture, residual stress, and displacement distributions are compared with those based on homogenized properties.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.05a
• /
• pp.87-89
• /
• 1993

용융탄산염 연료전지 양극 재료인 tape casting된 다공성 Ni-Cr 합금과 Ni-Al 합금의 전기화학적 특성과 소결 및 creep특성이 양극조건의 분위기 $650^{\circ}C$에서 조사되었다. 이들 전극재료의 전류밀도는 100 mV의 과전압에서 약 100~150㎃/$\textrm{cm}^2$의 크기이었다. Ni-Al 합금에서는 Ni 표면에 형성된 $Al_2$O$_3$의 영향으로 소결저항성이 큰 것으로 나타났으며, Creep 특성도 Al 첨가량의 증가에 의해 향상되었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.71-71
• /
• 1997

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.625-632
• /
• 2021

In this paper, the applicability of bottom ash to insulation concrete was investigated to increase the utilization of bottom ash. Bottom ash was used as the aggregates in porous concrete and extensive experiments were conducted to investigate the characteristics of porous concrete using two types of bottom ash aggregates. The water-binder ratios of 0.25 and 0.35 were chosen and concrete specimens was produced with the compaction of 0.5, 1.5, and 3.0MPa to analyze the material properties at different compaction conditions. After concrete specimens were cured for 28 days at water tanks, unit weight, total void ratio, and thermal conductivity were measured. Based on the measured experimental results, the relationships between the unit weight, total void ratio, and thermal conductivity of porous concrete containing bottom ash was presented.