• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.67-72
• /
• 2012

In this study, the leak-free performance and sealing endurance safety of CNG fueling nipple in which are related to the contact normal stress and equivalent true stress have been analyzed for CNG automobile using a finite element analysis. For the conventional circular o-rings and new double-lip o-rings with an initial compression rate of 15 percentages, the leak-free performance of double-lip o-rings with two contact sealing spots is 41% higher than that of the conventional circular o-rings with a contact sealing spot. The FEM computed results present that the leak-free endurance safety of double-lip o-rings with two contact sealing spots is 5% higher than that of the conventional circular o-rings for initial compression ratio of 15 percentages and a gas compression pressure of 8MPa. And, the maximum equivalent true stress of double-lip o-rings is 10.2% higher than that of the conventional circular o-rings for the leak-free endurance safety. This means that the double-lip o-ring may guarantee the extended sealing life compared to that of a conventional circular o-ring.

• KOREAN POULTRY JOURNAL
• /
• v.23 no.4 s.258
• /
• pp.95-103
• /
• 1991

계사시설, 환경관리, 시설자동화, 자동통제 및 전산화, 계분의 처리와 이용에 관해 검토해 보았다. 노후시설의 개선 또는 계사를 신축할 때는 다음과 같은 사항을 고려하여 계획을 세워야 한다. $\bullet$계사내부의 적정온도 유지를 위한 단열 $\bullet$자동급이 시설, 즉 사료탱크에서 체인 또는 링급이기로 사료의 자동이동 $\bullet$현재의 케이지에 가능한 자동집란 장치 $\bullet$여건이 적합하다면 자동화 케이지로 교체 $\bullet$노출된 급수통을 니플로 교체 $\bullet$계란 유통시 냉장이 완벽히 이루어지지 않는다면 계란 품질 보전을 위한 미네랄 코팅 $\bullet$계분처리방식중 노동력절감 및 공해방지 측면에서 가장 바람직한 형태를 선택 $\bullet$계사를 신축하는 경우 자동화 케이지 시스템과 계류장방식의 계분처리 체계의 선택을 신중히 검토 위와 같은 사항들은 산란계사 시설개선을 위한 의사결정에 도움을 줄 것으로 확신된다. 의사결정의 최종선택기준은 수익성에 있다!

• Journal of ILASS-Korea
• /
• v.1 no.1
• /
• pp.28-34
• /
• 1996

Study on the mechanism of droplet transport and the droplet eddy diffusivity in the intake manifold of internal conbustion engine with carburetor has been carried out in this paper The theory and experiments were studied and performed respectively, to elucidate the mechanism and to measure typical rates of deposition, on the walls of a straight type intake manifold, of water droplets suspended in a turbulent air streams. Accordingly, the results are that Mechanism of a spray transport to the walls is caused by the fluctuation component of radial velocity. Deposition rate of a spray on the walls is mainly dependent upon air velocity and mean diameter of spray, and Droplet eddy diffusivity in the intake manifold is around $80\sim105cm^2/sec$.

• Journal of Korean Institute of Fire Investigation
• /
• v.5 no.1
• /
• pp.21-24
• /
• 2004

본 연구는 가스시설에서 가장 중요한 기능을 하는 압력조정기가 가스공급압력을 연소기에 적합하게 조정압력을 높이거나 낮추어 일정하게 공급하여 연소가 정상적으로 이루어지도록 기능을 하고 있다. 압력조정기는 가장 보편화되어 있는 가정용 압력조정기인 l단감압식저압조정기를 비롯하여 자동절체식일체형저압조정기 등 여러 가지 형태가 사용되어지고 있다 LP가스압력조정기와 관련된 사고는 입구측니플 풀림, 내부부식, 밸브시트손상, 다이아프램손상 등 다양한 결함에 의해서 발생하고 있다. 압력조정기의 사고는 10년도안 전체사고의 5%를 차지하며, 주로 하절기인 6월부터 9월까지 사고가 많아 발생하였다 따라서 일반가정에서 가장 많아 사용하고 있는 1단감압식저압조정기를 대상으로 연구하였다.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.189-198
• /
• 2009

This survey was conducted to investigate the situation of housing type in poultry farms in Korea. The number surveyed among the farm size over 30,000 heads was 1,965 farms. Poultry housing types of windowless, open sided, vinyl house type were 19.0, 47.7, 19.8%, respectively. Waterers of nipple, bell, and 8 feet trough used in smaller than 50,000 heads of poultry farm were 40.6, 11.3 and 42.8%, respectively. But the bigger farm in the farm size of over 100,000 heads used more nipple waterer. Feeders of disk, hopper and chain used in poultry farm were 54.5, 16.3, 15.8%, respectively. Manure collecting system of scraper and belt was 29.4, 71.5 %, respectively. Ventilation systems of natural ventilation, natural + mechanical ventilation, mechanical ventilation were 40.5, 39.8, 20.7%, respectively.

• Journal of the Korean Society of Costume
• /
• v.62 no.5
• /
• pp.73-87
• /
• 2012

The purpose of this study is to find the Dart Manipulation with good fitting and evaluate the aesthetics of Dart Manipulation that is used in the designs of the original tops for women in their 30's. Subsequently, it suggests dart manipulation with good body fitting and physical fitness when designing original tops. The findings of this study are as follows. First, in the fitting of Dart Manipulation for different body types, cross direction Dart Manipulation received good marks in the Square Body Type while mixed direction and diagonal direction Dart Manipulation received high evaluation in the Standard Body Type. Also, for the Reverse Triangle Body Type, mixed direction Dart Manipulation received high marks. Since there are only small changes in fitting for the Square Body Type, the position of Dart Manipulation should be determined in regards to the aesthetic view as well as the fitting of the Standard Body Type and Reverse Triangle Body Type. Second, in the fitness of Dart Manipulation for different body types, an approach from the aesthetic view should be considered for Square Body Types because of the differences in fitness according to the position of dart manipulation. The fitness should be considered when positioning Dart Manipulation for the Standard Body Type and Reverse Triangle Body Type because of these differences. Third, for the greater variance of drop for these different body types, the change of the amount of dart received lower evaluation in fitting since the amount of dart increased when the dart was located higher than B.P. The number of dart should likely increase when gathering or tucking is necessary when there is an excessive amount of dart in Dart Manipulation for the different body types. Fourth, as for the changes of wrinkles in accordance with the body type, wrinkles were likely to be formed at the breast or neck area when there was a larger difference in drop. To prevent such problems, one more dart should be made on the wrinkle. In conclusion, the study suggests designing the original top with a better look and comfort by setting the balance between aesthetics and fitting in the design stage.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.84-91
• /
• 2015

The purpose of this study is to suggest the reasonable model of the caliber in suction nozzle, the pressure of suction nozzle, and the flow rate about foam system of line proportioner type using in the pumpcar. To test this, the experimental study was accomplished on the ground of the standards for the Performance Certification and Product Inspection of Foam Fire-extinguishing Chemical Mixing Machine. Aqueous Film Forming Foam in 3% and pipe type air foam nozzle with line proportioner FE 40 type were used. Test result showed that the pressure of suction nozzle within the limits between 0.25 MPa and 0.35 MPa was appropriate when the caliber in suction nozzle is 4 mm. Also, the pressure of suction nozzle within the limits between 0.45 MPa and 0.60 MPa was appropriate in the higher pressure than 4 mm when the caliber in suction nozzle is 5 mm.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.1
• /
• pp.51-56
• /
• 2016

In this study, for the tube-to-tube friction welding of hose nipple materials, the main parameters of friction welding were investigated using tensile tests, Vickers hardness surveys of the bond area (HAZ), and observations of the microstructure to increase the quality of friction welding based on visual examination. As-welded and post weld heat treated (PWHT) specimens were tested. The optimal welding conditions were found to be n = 1000 rpm, HP = 10 MPa, UP = 15 MPa, HT = 9 s, and UT = 5 s when the metal loss (Mo) was 7.5 mm. Furthermore, the peak of the hardness distribution of the friction welded joints could be eliminated by PWHT. Moreover, the two materials of the friction weld were thoroughly mixed with a well-combined structure of micro-particles, without any molten material, particle growth, or defects.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.2
• /
• pp.191-198
• /
• 2009

We have tested the stability of paeoniflorin, a new cosmetic ingredient, extracted from the roots of Paeoniae lactiflora. The stability of aqueous paeoniflorin solution at pH 3, 5 and 7 varied by adding buffer solution was tested at $0^{\circ}C,\;25^{\circ}C,\;40^{\circ}C,\;and\;65^{\circ}C$. The test was performed with or without UV light. The solution of paeoniflorin was stable at pH 3.0, however, the recovery rate of paeoniflorin was 40% at pH 7.0. The stability of paeoniflorin solution was decreased as the pH of paeoniflorin solution was increased by pH 7.0. The effect of storage temperature of paeoniflorin solution shows that the stability of paeoniflorin solution was decreased as the temperature was increased. The stability of paeoniflorin was rather good under UV light than the condition given above $40^{\circ}C$. The stability of paeoniflorin in W/O emulsions shows similar pattern to that of aqueous solution.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.10
• /
• pp.869-877
• /
• 2004

This paper deals with motion planning algorithm for kinematically redundant manipulators that are not fixed to the ground. Differently from usual redundant manipulators fixed to the ground, the stability issue should be taken into account to prevent the robot from falling down. The typical ZMP equation, which is employed in human walking, will be employed to evaluate the stability. This work proposes a feed forward ZMP planning algorithm. The algorithm embeds the 'ZMP equations' indirectly into the kinematics of the kinematic model of a manipulator via a ZMP stability index The kinematic self motion of the redundant manipulator drives the system in such a way to keep or plan the ZHP at the desired position of the footprint. A sequential redundancy resolution algorithm exploiting the remaining kinematic redundancy is also proposed to enhance the performances of joint limit index and manipulability. In addition, the case exerted by external forces is taken into account. Through simulation for a 5 DOF redundant robot model, feasibility of the proposed algorithms is verified. Lastly, usual applications of the proposed kinematic model are discussed.