• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1013-1022
• /
• 2012

Tag collection is one of the major concerns in radio frequency identification(RFID) system. All tags in RFID reader's transmission range send response message back to the reader in response to collection request message on the given rf channel. When multiple tags respond simultaneously, tag-collision may occur. Tag-collision problem is one of the most important issues in active RFID performance. To mitigate this problem, frame slotted ALOHA(FSA) anti-collision protocol is widely used in active RFID system. Several studies show that the maximum system efficiency of FSA anti-collision protocol is 36.8%. In this paper, we propose an efficient slotted CSMA/CA protocol to improve tag collection performance. We compare our protocol to the FSA anti-collision protocol. For the experiment, an 433MHz active RFID system is implemented, which is composed of an RFID reader and multiple tags. We evaluated the tag collection performance using one RFID reader and 40 tags in the real test bed. The experimental result shows that proposed protocol improves the tag collection time, round and collision probability by 18%, 37.4% and 77.8%, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8B
• /
• pp.822-829
• /
• 2009

A reader protocol is an interface between a host and RFID readers. There are several standards for reader protocol such as EPCglobal Low Level Reader Protocol (LLRP) 1.0.1, EPCglobal Reader Protocol (RP) 1.1, and ISO/IEC 15961/15962. Unfortunately, these standards focus on the passive RFID system, and so they are not appropriate for the active RFID system. In this paper, we implemented an efficient reader protocol for the active RFID system, which is based on EPCglobal LLRP 1.0.1, but smoothing/filtering functions of EPCglobal RP 1.1 are added. This protocol is designed to configure air interface parameters for active RFID readers and tags. It can reduce the amount of data transfer between the reader and host by filtering function, and can improve the performance of tag collection by smoothing function. In addition, it can remove inefficiency caused by tag memory data change according to the standards of ISO/IEC 15961/15962. In the real-world environment, we evaluated the performance of our implemented reader protocol using one RFID reader and 45 tags.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.747-754
• /
• 2013

This paper proposed a new transponder detection method to reduce tag recognition time and simplify anti-collision process in RFID systems. In conventional systems, a transponder in detectable area is passively recognized by responding to a reader command. In addition, if there are multiple tags in the area, a collision between tags occurs by responding at the same time to a command and anti-collision process begins. In the proposed method, tags are actively recognized without any command from a reader which results to reducing a tag recognition time and simplifying anti-collision process. To compare transponder recognition time, the process of transponder recognition in conventional systems is analysed. A circuit to detect transponder directly is developed and antenna voltage variation of a reader in the appearance of multiple transponders is analysed for the implementation of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.1005-1014
• /
• 2010

When reader collect tags, we found that they tend to get together to specific interface in Multi-Interface Multi-Channel 2.4GHz Active RFID system. To solve this problem, we designed the LP-Combind and AP-Balanced protocol for load distribution between interfaces, then verified its superiority of the performance through the simulation. There are three problems to implement designed protocols in hardware of firmware-level. first, tag selects randomly the channel of reader and reader need the method which can change the channel of tags. second, reader has the synchronization problem between reader and tag. third, reader has problem that MCU of reader have to operate simultaneously dual interface. To slove this problems, we designed the message and implemented method for tag channel change and the protocol in order to adjust synchronization between reader and tag, Therefore, we compared and analyzed the performance of protocols by experiment. If LP windows size is same, the performance of LP-Combined protocol and AP-Balanced protocol which lower collision probability by its load distribution is more outstanding than single interface protocol performance.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.204-212
• /
• 2008

Active RFID tags are currently used in harbor transportation; they are attached to cargo containers for sea transportation. They are designed to be able to be identified by RFID readers installed at ports in many countries. The international standard ISO/IEC 18047-7 regarding RFID conformance test methods suggests the use of air interface evaluation between an RFID reader and a tag. However, the test method suggested by the international standard is intended to detect a radio signal over only a very short period. Outcomes were uncertain, making it difficult to evaluate the system accurately. This paper proposes a new evaluation method by incorporating a 'self-running test mode' environment into the RFID tags in order to reduce the test time and increase testing accuracy. We found that the application of the suggested method to actual tags improves measurement time and uncertainty over that obtained using existing methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.731-736
• /
• 2017

In this paper, we propose a simplified tag collection algorithm to improve the performances of ISO/IEC 18000-7, which is a standard for an active RFID system. The proposed algorithm modifies the collection command that enables to start a tag collection round. The modified collection command includes the results of the listen period response for the previous collection round. Tags that receive the collection command check the collision status for their responses. If there is no collision, tags transmit their additional data and go into the sleep mode without the point-to-point read command and sleep command. A collection round for the standard consists of a collection command and response, a read command and response, and sleep command. On the other hand, in the proposed algorithm, a collection round consists of a collection command and response. The simulation results showed that the proposed algorithm can improve the identification delay about 16% compared with the standard when the number of tags are 300.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.871-885
• /
• 2015

The improved DFSA for 2.4GHz multi-tags active RFID is suggested in 2 different ways: 1) simplified tag collection and Ack procedure using query command and 2) modified Schoute's method to control the number of slots in the frame. To evaluate the performance of the improved system we develop the simulation model. Varying the number of tags in the system we track the performance measures such as throughput, recognition time for multi-tags and tag recognition rate during a given time. The suggested method shows the best performance over all measures. Simplification of collection and Ack commands using query commands contributes to reducing tag recognition time. And the modified Schoute's method which controls the frame size using $k_1$ and $k_2$ contributes to throughput improvement and reduces target cognition time by reducing the number of collection rounds.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7B
• /
• pp.686-693
• /
• 2009

In this paper, we propose an efficient tag sleep method utilizing empty time slots for improving the tag collection performance in active RFID systems. In the proposed tag sleep method, the reader detects the occurrence of empty time slots by carrier sensing and utilizes the wasted empty time slots to transmit sleep commands to the collected tags throughout the framed slotted aloha-based tag collection process, resulting in reducing the time required for tag collection. Via the simulation experiments, we evaluated the performance of the tag collection applied with the proposed tag sleep method, compared with that of the basic tag collection. The simulation results showed that the tag collection applied with the proposed tag sleep method could reduce the average tag collection time by 12.28%, 12.30%, and 13.31 %, for the framed slotted aloha with the fixed 128 time slots and 256 time slots, and the dynamic framed slotted aloha anticollision protocols, respectively.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.515-520
• /
• 2009

This paper presents the software design of RFID Educational system based on using 900MHz air interface between the reader and the tag. Software of the reader and active tag is developed on embedded environment and the software of PC controlling the reader is on window OS. ATmega128 processor is used for H/W of the reader and active tag, and C language is used for their developing. Programming on window OS used MFC. Main functions of this system are to control tag containing EPC global Data by PC through the reader, to obtain information of tag through the internet and to read/write data on tag memory. Software design of 900MHz RFID educational system is done on the basis of these functions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1459-1467
• /
• 2009

In this paper, we propose a novel method for improving the tag collection performance in active RFID systems by modifying the tag collection algorithm in the ISO/IEC 18000-7 standard. The proposed method enables to reduce the time slot size by reducing the response message size from the tag and to decrease the number of command messages from the reader throughout the tag collection process. This results in reducing the time required for tag collection and the battery consumption on tags by decreasing the total amount of messages. Via the simulation experiments, we evaluated the performance of the tag collection applied with the proposed method, compared with that of the basic tag collection complying with the standard. The simulation results showed that the proposed method could decrease the total amount of messages between the reader and tags dramatically and reduce the average tag collection time by 19.99% and 16.03% when the reader requested the additional data of 50 bytes and 100 bytes from the tags, respectively.