• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.4
• /
• pp.139-145
• /
• 2004

This paper presents human-in-the-loop evaluations of vehicle stability control(VSC) system using a driving simulator. A driving simulator which contains full vehicle nonlinear model is evaluated by using actual vehicle test data on the same driving conditions. Braking control inputs for Vehicle Stability Control system have been directly derived from the sliding control law based on vehicle planar motion equations with differential braking. Closed-loop simulation results at realistic driving situations have shown that the proposed controller reduces driving effort of a driver and enhances stability of a vehicle.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.550-552
• /
• 2014

차량 내부 네트워크는 LIN, CAN, FlexRay와 같은 제어 네트워크와 MOST와 같은 멀티미디어 네트워크가 있으며 이 내부 네트워크와 연결해 서비스를 사용하는 RF 통신으로는 대표적으로 블루투스, GSM, NFC가 있다. 그러나 능동 안전 시스템과 같은 지능형 기술의 지속적인 도입과 기계, 유압식 기기의 전자화에 따른 네트워크상의 통신량이 급격히 증가하면서 네트워크의 규모 및 통신 복잡도 등이 증가하고 있다. 따라서 차량 내/외부 네트워크의 최적화, 최소화 문제가 반드시 해결되어야하는 문제로 떠오르고 있다. 또한 이러한 통신환경이 갖추어진 이후에도 무선통신 기술의 성능향상 및 통신기술과 응용 서비스 분야와의 연계, 그리고 통신서비스를 위한 사업 모델 개발이 요구되는 등 앞으로 해결 해야하는 문제는 여전히 많이 남아 있다고 할 수 있다. 본 논문에서는 지능형 자동차의 RF 통신서비스에서 발생할 수 있는 지능형자동차의 보안위협 요소를 분석하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.1321-1323
• /
• 2013

지능형 자동차에서 영상 기반 능동 안전시스템의 신뢰성을 확보하기 위해서는 도로 위의 다양한 객체를 강건하게 검출하고, 추적하는 것이 가장 중요하다. 본 논문에서는 다중 가설 기반 추적 프레임워크를 이용하여, 실시간으로 전방 차량을 검출하고 추적하는 시스템을 제안한다. 제안한 시스템은 다양한 외부 도로 환경에서 획득된 실험 영상에 대하여 10-15Hz 의 처리 속도로, 평균적으로 98%의 인식률을 제공할 수 있다.

• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.45-53
• /
• 2014

In this study, we analyzed the next generation ITS (C-ITS) technology trends, focusing on the national and international C-ITS projects. Based on the promotion practices of developed countries, we pointed out the lack of linkages with the existing ITS infrastructure. As a way to overcome this problem, we proposed the three-direction to enable the existing ITS infrastructure corresponding to the C-ITS. First one is developing a technique to improve the performance of the existing ITS infrastructure and automate the performance management (Performance-enhanced ITS). Second, developing active sensors or fusion sensor which along with V2X communication technology implement of an active safety driving support system (Safety-enhanced ITS). Third, we need to develop a technology that generate the new advanced traffic data by integrating the collected data from existing ITS infrastructure and nomadic device (Cloud-ITS). By improving the function of the existing ITS infrastructure for adaptation to the new V2X communication environment, we enhanced the efficiency of maintenance performance and would maximize the benefit of the introduction of C-ITS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.468-474
• /
• 2019

Korea had the highest accident rate among OECD countries in 2018, with 8.4 per 100,000 population, ranking 4th among 35 countries. In addition, the accident rate of traffic with children and the elderly was also high. This study reviewed the relevant literature and analyzed the traffic-accident analysis system. Customized traffic safety facilities were developed. In addition, by measuring the visibility of the traffic safety facilities by installing a test bed, this study measured the forward driving frequency and vehicle driving speed while driving. As a result of applying the "pedestrian pedestrian model" collision test model, the possibility of serious injury after installing the facility was reduced greatly to 4.6%. In this study, the visibility of traffic safety facilities and the effect of reducing the traffic speed were verified through test beds. Recognizing traffic safety facilities will reduce traffic accidents.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.1
• /
• pp.13-18
• /
• 2016

More than 80 percent of traffic accidents related with lane departure believed to be the result of crossing the lane due to either negligence or drowsiness of the driver. Lane-departure related accident in the highway usually involve high fatality. Even though LDWS is believed to prevent accident 25% and reduce fatalities by 15% respectively, its effectiveness in performance is yet to be confirmed in many aspects. In this study, the vehicle lateral locations relative to warning zone envelop (earliest and latest warning zone) defined in ISO standard, ECE and NHTSA regulations are compared with respect to various factors including delays, vehicle speed and vehicle heading angle with respect to the lane. Since LDWS is designed to be activated at the speed over 60 km/h, vehicle speed range for the study is set to be from 60 to 100 km/h. The vehicle heading angle (yaw angle) is set to be up to 5 degree away from the lane (abrupt lane change) considering standard for lane change test using double lane-change test specification. The TLC is calculated using factors like vehicle speed, yaw angle and reaction time. In addition, the effect of vehicle type and reaction time have been considered to assess LDWS safety.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.82-94
• /
• 2008

Airport GIS is a comprehensive information system to improve security and efficiency of airport. At the initial stage to make it real, the current status of domestic and international regulations along with relevant standardization bas been reviewed. Gimpo Airport becomes a test-bed to get some ideas about how to bring the airport GIS into workflow by building service model and basic design based on current status and demand analysis of the airport. The 6 service models primarily brought into the project are as follows: (1) Local vehicles safety management in airside, (2) Intelligent traffic control between flights and vehicles at main cross points, (3) Dynamic safety management against FOD in airside and breakage on pavement, (4) Special support vehicle management such as deicing remotely controlled, (5) Response and support for fire vehicles and ambulances of signatory institutions in emergency. The upcoming research topic aims at drawing a specific design and building integrated system in the future.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.1
• /
• pp.12-17
• /
• 2012

ADAS(Advanced Driver Assistance System) which is developed for alleviating driver's load has become improved with extending it's role. Previously, ADAS offered simple function just to make driver's convenience. However, nowadays ADAS also acts as Active Safety system which is made to release and/or prevent accidents. Longitudinal control system, as one of major parts of Active Safety System, is assessed as doing direct effect on avoiding accidents. Therefore, many countries such as Europe and America has pushed longitudinal control system as a government-wide project. In this paper, it covers the result of evaluation system and vehicle evaluation for development study in FCW, ACC and AEB.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.4
• /
• pp.84-90
• /
• 2022

With the popularization of autonomous driving technology, safety has emerged as a more important criterion. However, there are no assessment protocol or methods for AES (Autonomous Emergency Steering). So, this study proposes AES assessment protocol and scenario corresponding to collision avoidance Car-to-Car scenario of Euro NCAP in order to prepare for obstacles that appear after the emergency steering of LV (Leading Vehicle) avoiding obstacles in front of. Autoware-based autonomous driving stack is developed to test and simulate scenario in CARLA. Using developed stack, it is confirmed that obstacle avoidance is successfully performed in CARLA, and the AES performance of VUT (Vehicle Under Test) is evaluated by applying the proposed assessment protocol and scenario.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1309-1315
• /
• 2014

The switch for a maglev vehicle should be designed such that the vehicle safely changes its track without touching the guiderail. In particular, a medium-to-low-speed EMS -type maglev train relies heavily on a U-type electromagnet where it generates levitation force and guidance force simultaneously. Therefore, it is necessary to evaluate the safety of the vehicle whenever it passes the switch, as it lacks active control of the guidance force. Furthermore, when the vehicle passes a segmented switch, which is a group of curves made up of connected lines with a small radius of curvature, it may come into mechanical contact with the guiderail owing to the excessive lateral displacement of the electromagnet. The goal of this study is to analyze the influence of a segmented switch on the safety of major design-related variables for achieving improved running safety. We propose a three-dimensional multibody dynamics model composed of two cars with one body. Using the proposed model, we perform a simulation of the lateral air gap, which is one of the measurements of the running safety of the vehicle when it passes the switch. The analyzed design variables are the length between short span girder, the articulation angle, the length between two centers of a fixed girder at its ends, and the number of girders. On the basis of the effects of the considered design variables, we establish an optimized design of a switch with improved safety.