• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2002.10a
• /
• pp.104-112
• /
• 2002

최근 도심지 지하철내 누유로 인한 악취·화재의 위험이 대중매체를 통해 보도되어 사회적 문제로 대두되고 있으며, 개정된 토양환경보전법 및 지하수법에 따라 주유소오염에 대한 정화기준이 강화되고 있어 도심지 주유소와 인접한 천층부 지하철터널의 누유대책 마련이 절실히 요구되고 있다. 도심지 지하철터널의 누유대책을 서울시 지하철 00공구 설계사례를 통해 먼저 지하수 유동분석에 의한 지하수위 검토와 오염자 추적에 의한 누유확산 범위를 파악하고, 두 번째로 누유감지센서에 의한 누유조기경보, 유량계 및 수질센서에 의한 수질data화의 수질 및 유량자동모니터링 시스템을 구축하며, 마지막으로 Oil-Stop 맨홀에 의한 누유분리 차단대책을 제안하고자 한다.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.35-44
• /
• 2023

This study aimed to analyze the performance of hydraulic systems for dental chair when long working hours makes the temperature of hydraulic fluid rise. The study was carried out in the following manner. First, 'cylinder's clearance' was reflected in the three kinds of hydraulic circuits, which were developed through the preceding study, in order to analyze oil leak. Second, 12 cases of simulations comprised of the up and down of cylinders were carried out. Third, it was determined whether the cylinder velocity of dental chair surpasses 1cm/s required in the development even in the hydraulic fluid temperature of 60℃. In conclusion, this study used SimulationX to verify the performance stability at high temperatures using three types of hydraulic circuits designed to develop a Korean unit chair.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.1 no.2
• /
• pp.40-51
• /
• 1998

The interaction of contained oil slicks with current was investigated with a two-dimensional experimental setup in the circulating water channel facility. A vertical plate was used to contain the oils against the currents and the evolution of the oil slick, mainly focusing on the water/oil interface, was examined with an aid of a laser sheet. Two different oils - soy bean oil and diesel oil - were studied with varying the current speed (10 cm/sec to 35 cm/sec), the barrier depth (4 cm and 8 cm) and the volume of oil (2 liter to 12 liter). Different types of the interface behavior were observed according to the conditions and their mechanism was discussed based basically on the dimensional analysis. The critical speeds of two types of oil loss mechanism (entrainment failure and drainage failure) were also examined.

• Water for future
• /
• v.14 no.4
• /
• pp.13-18
• /
• 1981

The rainfall pattern analysis on time distribution characteristics of rainfall rates in important in determination of design flow for hydraulic structures, particularly in urban area drainage network system design. The historical data from about 400 storm samples during 31 years in Seoul have been used to investigate the time distribution of 5-minute rainfall in the warm season. Time distribution relations have been deveolped for heavy stroms over 20mm in total rainfall and represented by relation percentage of total storm rainfall to percentage of total storm time and grouping the data according to the quartile in which rainfall was heaviest. And also time distribution presented in probability terms to provide quantitative information on inter-strom variability. The resulted time distribution relations are applicable to construction of rainfall hyetograph of design storm for determination of design flow hydrograph and identification of rainfall pattern at given watershed area. They can be used in conjuction with informations on spatstorm models for hydrologic applications. It was found that second-quartile storms occurred most frequently and fourth-quartile storms most infrequently. The time distribution characteristics resulted in this study have been presented in graphic forms such as time distribution curves with probability in cumulative percent of storm-time and precipitation, and selected histograms for first, second, third, and fourth quartile stroms.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.669-680
• /
• 2017

This study evaluated the consistency of the standard flow to forecast low-flow based on various drought indices. The data used in this study were streamflow data at the Gurye2 station located in the Seomjin River and the Angang station located in the Hyeongsan River, as well as rainfall data of nearby weather stations (Namwon and Pohang). Using streamflow data, the streamflow accumulation drought index (SADI) was developed in this study to represent the hydrological drought condition. For SADI calculations, the threshold of drought was determined by a Change-Point analysis of the flow pattern and a reduction factor was estimated based on the kernel density function. Standardized runoff index (SRI) and standardized precipitation index (SPI) were also calculated to compared with the SADI. SRI and SPI were calculated for the 30-, 90-, 180-, and 270-day period and then an ROC curve analysis was performed to determine the appropriate time-period which has the highest consistency with the standard flow. The result of ROC curve analysis indicated that for the Seomjin River-Gurye2 station SADI_C3, SRI30, SADI_C1, SADI_C2, and SPI90 were confirmed in oder of having high consistency with standard flow under the attention stage and for the Hyeongsan River-Angang station, SADI_C3, SADI_C1, SPI270, SRI30, and SADI_C2 have order of high consistency with standard flow under the attention stage.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.3
• /
• pp.63-74
• /
• 1986

A methodology for the probabilistic determination of active storage capacity of an impounding reservoir is proposed with due considerations to the durations and return periods of the low flow series at the reservoir site. For more reliable probabilistic analysis the best-fit stochastic generation model of Monte Carlo type was first selected for the generation of monthly flow series, the models tested being the Month Carlo Model based on the month-by-month flow series (Monte Carlo-A Type), Monte Carlo Model based on the standardized sequential monthly flow series (Monte Carlo-B Type), and the Thomas-Fiering Model. Monte Carlo-B Model was final1y selected and synthetic monthly flows of 200 years at Hong Cheon dam site were generated. With so generated 200 years' monthly flows partial duration series of low flows were developed for various durations. Each low flow series was further processed by a nonsequential mass analysis for specified draft rates. This mass analysis furnished the storage-draft-recurrence interval relationship which gives the reservoir storage requirement for a specified water demand from the reservoir during a drought of given return period. Illustrations are given on the application of these results in analyzing the water supply capacity of a particlar reservoir, existing or proposed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.163-167
• /
• 2014

To prove the vibration and speed error problems caused by the nonlinear friction characteristics and load variation of the hydraulic system, a PID speed controller and a load compensation controller for the hydraulic inverter-fed elevator are proposed. The load compensation controller is composed by the PI controller and the speed controller is composed by the PID controller. The P,I and D gains of the control parameters are obtained by the frequency response of system transfer function. The Effectiveness of the proposed controller are shown by experimental results, which the proposed controller yields robustness with load variations and stable and good speed and acceleration responses with less oscillations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.260-266
• /
• 2009

Non-revenue water reduction(NRW) technologies are implemented to evaluate and manage leakages scientifically in water distribution systems under local governments. A development of quantitative leakage indicator by measuring minimum night flow, pressure control policy by installation of PRV(pressure reducing valve) and the establishment of leakage prevention schemes by residual life modeling of deteriorated water pipes are reviewed and studied. Estimation models of allowable leakage are developed by measuring and analyzing minimum night flow at residential and commercial area in Nonsan city, which is suggested from UK water industry and can improve an existing leakage indicator for the evaluation of non-revenue water. Also, pressure control method is applied and analyzed to Uti distribution area in Sacheon city in the operation aspect. As results, $466\;m^3/day$ of leakage can be reduced and it is expected that 113million won of annual cost can be saved. In the part of corrosion velocity and residual life assessment, non-linear prediction models of residual thickness are proposed by assessment of corrosion velocity based on exposure years, soil and water quality etc., since the deteriorated water pipe play a major role to increase leakage. It is expected that collection data and analyzing results can be applied effectively and positively to reduce non-revenue water by accumulating surveying data and verifying the results in the business field of water distribution systems under local governments.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.1-6
• /
• 2007

This paper provides the effects on the leakage characteristics of the surface roughness of a valve stem in LPG automotive. The valve stem seal is to stop an oil leakage through a sealing gap between a valve stem and a valve stem seal. The sealing performance of two components is related to a leak safety and a long life of a valve stem and a valve stem seal. The experimental results show that the optimal surface roughness of a valve stem is to recommend as $0.4{\sim}0.5{\mu}m$ in a centerline average roughness, Ra and a uniformly distributed profile of the roughness. Basically the smooth surface and uniform profiles of the roughness may reduce an oil leakage between a valve stem and a valve stem seal.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2058-2062
• /
• 2009

1992년 한강수계법이 제정되면서 우리나라에 도입된 오염총량관리제는 현재 2차총량관리 시행계획수립 단계에 이르렀다. 오염총량제에서 수질모델은 수계구간별로 설정된 기준유량과 목표수질 조건을 달성하는 지를 판단할 수 있는 도구로 사용되며, 다양한 모델들이 사용되고 있다. 그 중 하천수질모형으로는 주로 QUAL2E, QUALKO, QUALKO2 모형으로 압축할 수 있다. QUAL2E 모형은 1980년대에 개발되어 국내외로 널리 이용하고 있으나 SOD를 0차나 일정량으로 처리하였고, 부착조류에 의한 용존산소 변화와 부유 조류 사멸시 발생하는 유기물이 고려되지 않았다. 또한 용존산소가 부족한 상태에서 반응이 활발한 탈질화과정이 포함되지 않아 이들 반응에 의해 수질이 영향을 받는 하천에 적용하기에는 한계가 있었다. 그리고 QUAL2E 모델은 여러 개의 지류를 가진 대형 하천에는 적용하기 어려운 단점이 있다. 국내에서는 1999년 QUAL2E 모델에 WASP5의 장점을 접목시켜 QUALKO 모델을 개발하였다. 이 모델은 QUAL2E에 부유성 조류의 사멸로 인한 유기물의 내부증가, 탈질화 반응 및 부착식물의 광합성 호흡 과정을 추가한 것이다. 또한 QUAL2E 모델에서 BOD는 CBOD로 입력되고 모의되므로 bottle BOD의 개념이 결여되어 있으므로 이러한 문제점을 보완하고, 조류의 생산 및 사멸에 의한 내부생산 유기물 증가와 탈질화 반응 과정을 추가한 것이다. 우리나라에서 진행되고 있는 총량관리 대상물질은 2010년까지는 $BOD_5$이며, 2011년부터는 일부 지역에 총인이 포함될 예정이다. 2007년에 실험실에서 측정하는 BOD5나 유기성 질소 또는 유기성 인을 그대로 입력하여 계산되고 출력할 수 있으며, 향후 오염총량제의 관리대상항목으로 논의되고 있는 TOC를 모의할 수 있는 QUALKO2가 개발되었다. 이에 본 연구에서는 향후 활용도가 클 것으로 기대되는 QUALKO2 모형에 기존 QUAL2E-UNCAS 모형에 서 수행할 수 있는 불확실성 해석 기법인 Monte Carlo 모의를 가능하도록 모형을 수정하고자 한다. 실제 하천에서의 수질해석에 대한 단순한 표현인 수학적 모형은 불확실성을 내포하고 있으며, Monte Carlo 해석을 사용하여 모형의 불확실도 정량화와 매개변수의 불확실성을 통계학적으로 기술할 수 있다. 또한 각 지점에 대한 계산결과치들에 대해 빈도 및 누가빈도분포 값을 제시함으로서 모형 예측치들의 전반적인 분포경향을 평가할 수 있으며, 하천수질에 대해서 환경기준치를 위배할 가능성을 산정하는데 활용할 수 있다. 우리나라 실정에 맞는 QUALKO2 모형에 Monte Carlo 모의를 통해 신뢰도 기반의 수질해석을 수행하게 된다면 수질정책의 기초자료 제공에 기여할 것으로 판단된다.