• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.794-797
• /
• 2009

중소형 폐기물 소각설비의 폐열보일러에서 생산되는 10 $kg/cm^2$미만의 저압증기를 이용한 증기터빈발전에서 증기의 건도를 높이이 위한 증기 전처리가 필수적이며, 건도를 증가시킨 증기를 이용하여 발전실험을 하였다. 본 연구에 적용된 증기터빈발전기는 마이크로 축류식 증기터빈으로 배압식을 채택하였으며, 증기터빈에 공급되는 증기압력의 증가에 따라 증기공급량, 발전량이 증가하였으며, 이에 따른 발전 효율은 설비의 효율에 따라 변하였다. 또한, 배압식 증기터빈의 경우, 공급.배기측의 증기 압력의 차이가 증가함에 따라 발전을 위한 증기 소비율이 감소하고 발전 효율이 증가함을 볼 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.472-482
• /
• 1998

오늘날의 통신서비스들은 음성이나 데이터 서비스와 같은 전통적인 서비스 뿐만 아니라 비디오 서비스와 같은 대량의 데이터를 전송해야만 하는 멀티미디어 서비스를 포함한다. 이러한 요구를 수용하기 위해서 BISDN(Broadband Integated Digital Network)이 개발되었고 이의 기반 기술로 ATM이 채택되었다. 다양한 멀티미디어 응용들 중에서 VOD(Video On Demand), 화상회의 등은 데이터를 동시에 여러 목적지로 보내는 멀티캐스트 특성이 있다. 그러므로 멀티캐스트 능력은 멀티미디어 통신에서 매우 중요하다. 본 논문에서는 링망을 이용한 병렬 멀티캐스트 패킷스위치(Parallel Multicast Packet Switch with Ring Network: PMRN)에서의 분리된 HOL을 이용한 멀티캐스트 셀 스케줄링 기법을 제안한다. 이 기법은 입력버퍼의 앞단에 멀티캐스트 셀과 유니캐스트 셀을 위한 분리된 HOL을 두고 non-FIFO방식을 사용함으로서 입력버퍼 내에서 전송 가능한 멀티캐스트 셀과 유니캐스트 셀을 동시에 스케쥴링할 수 있도록 하여 입력버퍼 내에서의 지연을 감소시키고 링망과 일대일 연결 네트워크의 이용율을 높이며 스위치의 처리율을 높일 수 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.643-646
• /
• 2001

현재의 인터넷 사용자들은 하루가 다르게 증가하고 있는 실정이다. 사용자들의 증가로 인하여 많은 네트워크의 부하가 걸리게 되는데 이는 결국 네트워크 속도 감소로 이어지고 있다. 따라서 네트워크의 속도 문제를 해결하기 위한 방법으로 많은 연구가 진행 되어 왔는데 그 중의 하나가 웹 캐쉬 방법중의 하나인 프락시(proxy) 서버를 이용하는 방법이다. 이러한 프락시 서버 관리를 위한 모니터링 도구들이 많이 상용화 되었고 기존의 프락시 서버를 관리하는 모니터링 연구에서는 프락시 서버의 캐쉬 히트율(hit ratio)이나 바이트 히트율을 높이는 방안을 제시하고자 했다. 그러나 이러한 모니터링으로는 프락시 서버의 부하(load)가 얼마나 걸리는지를 파악 할 수가 없다. 따라서 본 논문에서는 기존의 프락시 서버 모니터링 방식과 더불어 부하의 정보를 제공함으로서 부하 균등 정책이나 사용자의 성향을 파악하여 프락시 서버를 좀 더 효율적으로 관리하고자 하는 방안을 제시하고자 한다.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.76-82
• /
• 2005

Evaporative cooling pad system is one of the main cooling methods in greenhouses and its efficiency is very high. However, it has some disadvantages such as greenhouse temperature distributions are not uniform and installation cost is expensive. In this study, a CFD simulation model f3r predicting the air temperature distribution in the fan and fad cooling greenhouse was developed. The model was calibrated and validated against experimental data and a good fit was obtained. The influence of different outside wind, fan and pad height, ventilation rate, shading, and greenhouse length, were then examined. In order to reduce the internal temperature gradients, it is desired that the prevail wind direction and the fan and pad heights are considered. The simulation indicates that high ventilation rates and shading contribute to reduce the temperature gradients in the fan and pad cooling greenhouse. In order to maintain the desired greenhouse temperature, the pad-to-fan distance should be restricted according to the design climate conditions, shading and ventilation rates. The developed CFD model can be a useful tool to evaluate and design the fan and pad systems in the greenhouses with various configurations.

• Tunnel and Underground Space
• /
• v.12 no.2
• /
• pp.83-91
• /
• 2002

Stability analysis of rocky embankment slopes is done by both the limit equilibrium method and the finite difference method. The height or the rocky embankment is approximately 40 m and the side slope is 1 vertical to 1.5 horizontal. The cohesion and internal friction angle of rock debris are assumed zero and 43$^{\circ}$, respectively. For finite difference analysis, strength reduction method is used to calculate the saft factor of the slope. As a result, the safety factor of the slope is discovered to be 1.4 by using either methods. Considering that the design criteria of the safety factor is 1.3, it can be judged that the rock fragments embankment slope is in a stable state.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.425-434
• /
• 2007

In this paper, the stability standards of slopes reclaimed by soils mixed with stone dust were proposed to manage the stone dust as recovery soils. First of all, the mixed ratio between stone dust and natural soil is classified into 5 groups, and a series of soil test was performed in each group. As the results of tests, the shear strength and the maximum dry unit weight were increased in decrease of the mixed ratio of stone dust. On the basis of the investigation to the safety factor standards of embankment slopes in and outside the country, a slope stability rank of slopes reclaimed by mixed soils were divided into 3 stages such as unstable stage, attention stage and stable stage. The slope angle, the slope height and the mixed ratio with stone dust were proposed by the result of stability analysis of slopes reclaimed by mixed soils. As the result of slope stability analysis, the slope angle of 1 : 1.8 at the reclaimed slope should be constructed in case of the slope height of 10 m. Also, the slope angle of 1 : 1.8 and the mixed ratio of stone dust less than 50% should be constructed in case of the slope height of 15 m. The analysis result of reclaimed slope constructed inside the quarry is similar to that of reclaimed slope constructed on the open ground in same conditions of the slope angle, the slope height and the mixed ratio with stone dust. The proposed stability standards of slopes reclaimed by soils mixed with stone dust can be used practically at the quarrying site.

• Tunnel and Underground Space
• /
• v.23 no.2
• /
• pp.150-159
• /
• 2013

It is generally well known that the stratification of thermal energy in heat stores can be improved by increasing the aspect ratio (the height-to-width ratio) of the stores. Accordingly, it will be desirable to apply a high aspect ratio so as to demonstrate the good thermal performance of heat stores. However, as the aspect ratio of a store increases, the height of the store become larger compared to its width, which may be unfavorable for the structural stability of the store. Therefore, to determine an optimum aspect ratio of heat stores, a quantitative mechanical stability assessment should be performed in addition to thermal performance evaluations. In the present study, we numerically investigated the mechanical stability of silo-shaped rock caverns for underground thermal energy storage at different aspect ratios. The applied aspect ratios ranged from 1 to 6 and the mechanical stability was examined based on factor of safety using a shear strength reduction method. The results from the present study showed that the factor of safety of rock caverns tended to decrease with the increase in aspect ratio and the stress ratio of the surrounding rock mass was influential to the stability of the caverns. In addition, the numerical results demonstrated that under the same conditions of rock mass properties and aspect ratio, mechanical stability could be improved by the reduction in cavern size (storage volume), which indicates that one can design high-aspect-ratio rock caverns by dividing a single large cavern into multiple small caverns.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.1
• /
• pp.47-52
• /
• 2015

In the slope stability analysis and design, Limit Equilibrium Method (LEM) and Shear Strength Reduction technique (SSR) are mainly used. Both methods are able to perform two and three dimensional analysis. SSR is considered to be more sensitive and more reasonable than LEM by many researchers. However, in practice LEM is still widely used because of the increase of analysis time and complexity of the model in SSR. In this study, three dimensional analysis of the protruding rock slope is performed by SSR in order to study the effects of protruding length using rock slope FLAC 3D. In this study, as results of analysis variations of the safety factor have been studied according to slope angle, slope height, the soil strength, protruding slope length projected variables. The results show that the factor of safety as more affected by the shapes of the protruding rock slope than the rock strength.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.1-12
• /
• 1990

The study is concerned with the analysis of combined forging of non-axisymmetric shapes with inclined protrusions by UBET technique. Work hardening is considered for the given range of strain rate during the forging process. A complex shape with inclined cavities is analyzed by subdividing the workpiece into finite UBET elements for which simple velocity fields are applicable. An experimental set-up was designed and manufactured for the experiment, and experiments are carried out with lead billets. The devised set-up can be used for closed-die forging of complex shapes with protrusions in which the dies can be separated automatically for easy removal of the forged products. Based on the derived kinematically admissible velocity fields for corresponding UBET elements, general computer programs have been developed. Since the energy dissipation rate for each elemental region is provided by subprograms (Subroutine or Function), the developed program can be applied to the forging problems of various shapes. The present study has shown that the method developed can be effectively applied to forging of non-axisymmetric shapes with complicated protrusions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.842-846
• /
• 2008

원수의 탁질 중에서 입경이 $10^{-1}$mm이상인 것은 보통침전으로 제거가 가능하지만, 입경이��$10^{-3}mm$이하가 되면 일반적으로 콜로이드입자라고 총칭하며 그대로의 상태로서는 거의 침강되지 않을 뿐만 아니라 급속여과기구에서도 포착되지 않는다. 따라서 급속여과 방식에서는 이와 같은 탁질을 효과적으로 제거하기 위한 전처리로서 응집조작으로 인한 콜로이드상의 탁질을 플록화하여 약품침전이나 급속여과에서 포착되도록 탁질의 성상을 변화시키는 조작이 반드시 필요하다. 또한 양호한 플록을 효과적으로 형성시키는 약품혼화와 플록형성 등을 강구해야 한다. 이에 본 연구에서는 현재 국내에서 운영하고 있는 정수처리시스템의 일부인 혼화지내에 혼화지점의 단면적을 축소시켜 약품혼화효과를 극대화하고 혼화기의 소요동력을 감소시켜 혼화효과를 개선하며 혼화지내 혼화기 운용의 비용 절감 효과를 증가시키기 위한 저에너지형 CF혼화장치를 개발하는데 연구 목적이 있다. 연구결과 CF혼화장치의 설치시 약품 투입 위치에 따라 $2{\sim}6%$정도의 탁도제거율의 상승과 슬러지 높이의 차이를 보이는 것으로 나타났으며 이 실험 결과 약품투입장소에서 혼화지의 Compact화로 인해 급속 혼화를 이룰 경우 더 많은 플록화로 인해 탁도 제거율이 높아지는 것을 알 수 있다.