• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.225-228
• /
• 2000

본 논문에서는 2차의 격자 IIR 노치 필터를 이용하여DS-CDMA 시스템에서 협대역 간섭신호를 제거한다. 본 노치필터는 구조가 간단하고 다양한 간섭 신호 모델에 따라 필터의 계수를 조절할 수 있어 간섭신호의 효과적인 제거가 가능하다. 노치필터의 앞단에는 주파수 추정부를 평행하게 구성하여 간섭신호 주파수의 위치와 파워를 검출한다. 제안된 적응 필터링 알고리듬은 이러한 정보를 이용하여 노치필터의 주파수를 조절하고 간섭 신호의 파워와 대역폭에 따라 노치의 넓이와 깊이를 조절한다. 즉, IIR 노치 필터의 특성을 이론적으로 분석하여 출력 신호대 잡음비를 입력과 필터의 파라미터에 관한 수식으로 유도하였고 이를 이용하여 주어진 입력에 따른 최적의 필터 파라미터를 구하여 적용시키는 것이다. 입력의 간섭 주파수와 파워를 검출하는 방법에는 여 러가지가 있지만 본 논문에서는 비교적 간단한 IIR ALE[6]를 사용하였다. 제안된 알고리듬을 사용한 결과 신호대 잡음비와 에러율에 있어서 FIR 필터를 사용한 기존의 방법[4]에 비하여 좋은 성능을 보임을 알 수 있다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.435-441
• /
• 2017

Detecting an inter-harmonic accurately is not easy work, because it has small magnitude, and its frequency which can be observed is not an integer multiple of fundamental frequency. In this paper, a new method using filter bank system and adaptive predictor is proposed. Filter bank system decomposes input signal to sub bands. In adaptive predictor, inter-harmonic is detected with decomposed sub band signal as input, and error signal as output. In this scheme, input-output characteristic of adaptive predictor is notch filter, as predicted harmonic is canceled in error signal, so detecting an inter-harmonic can be possible. Magnitude and frequency of detected inter-harmonic is estimated by recursive algorithm. The performances of proposed method are evaluated to sinusoidal signal model synthesized with harmonics and inter-harmonics. And validity of the method is proved as comparing the inter-harmonic detection results to MUSIC and ESPRIT.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.110-116
• /
• 1996

In this paper a novel method improving the accuracy of DTMF tone reception in ARS system is proposed. ARS system should allow users to generate DTMF signals while it is sending voice guidance. It is not unocmmon, in this case, that a portion of transmitting voice signals cross-talks to the receiving channel and it often results in interfering with the receiving DTMF signals. Serious degradations including DTMF tone missing, false alarm and so forth have been introduced for the above reason. To overcome this phenomena, we have proposed a way eliminating the frequency spectra representing DTMF signals bands from the transmitting voice signal by using notch filters. This method also employs bandpass filters of which the frequency responses are reciprocal to those of the notch filters incorporated with the DTMF receiver. It is shown that a drastic improvement has been achieved with respect to the DTMF tone detection with little deterioration of voice guidance quality.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.79-80
• /
• 2009

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.3
• /
• pp.274-283
• /
• 2006

The Permanent Magnet Synchronous Motor(PMSM) drive systems with ball-screw, gear and timing-belt are widely used in industrial applications such as NC machine, machine tools, robots and factory automation. These systems have torsional vibration in torque transmission from servo motor to mechanical load due to the mechanical couplings. This vibration makes it difficult to achieve quick responses of speed and may result in damage to the mechanical plant. This paper presents adaptive notch filter with auto searching function of vibration frequency to reject the mechanical vibration of linear feeder system with PMSM. The proposed adaptive notch filter can suppress the torque command signal of PMSM in the resonant bandwidth for reject the mechanical torsional vibration. However, the resonant frequency can vary with conditions of mechanical load system and coupling devices, adaptive notch filter can auto search the vibration frequency and suppress the vibration signal bandwidth. Computer simulation and experimental results shows the verification of the proposed adaptive notch filter in linear feeder system with PMSM.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.8-17
• /
• 1999

In this paper, a proposal for improving the performance of IF in-phase combiner is presented in view of simple hardware design and good performance for space diversity application. By adding the stable normalization circuit to the phase detector, better performances are obtained even for a severe notch depth of 30 dB. To check the validity of this proposal, various results based upon numerical simulation and laboratory test are presented here in conjunction with 64-QAM digital radio relay system.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.779-782
• /
• 2000

능동 소오나 시스템에서는 잔향음 제한 환경에서 표적 검출을 하기가 용이하지 못하다. 본 논문에서는 고정된 노치 필터로 제거할 수 없는 시 불변성의 잔향음을 효과적으로 제거할 수 있는 방법을 제안하였다. 제안된 알고리즘은 기존의 적응형 잡음 제거기가 갖고 있는 단점을 보완하기 위하여, Gram-Schmidt 직교화과정을 전처리 기법으로 사용하였다. 아울러, 제안된 잔향음 기법을 동해에서 실측한 자료에 적용함으로써 그 성능을 검증하였다.

• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.95-103
• /
• 2022

In this paper, the efficiency of a sensorless method with square-wave injection for a low-cost inverter, so called B4 inverter is presented. This inverter comprises only 4 switches to reduce system cost. It is distinguished from the conventional B6 inverter that has 6 of switching elements. The B4 inverter, injected a 1 kHz of harmonic wave, has been modelled using the functions and library in Matlab/Simulink. This paper described each component of sensorless algorithm. Among them, the Notch Filter is used to extract the harmonic component of the phase current and a second-order low-pass filter was used to reduce the ripple of the estimated speed. It is shown through simulation that the rotor angle of a permanent magnet synchronous motor is detected by multiplying the current waveform extracted using the notch filter by the harmonic voltage. The feasibility of the proposed method is shown through Simulink simulation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.4
• /
• pp.719-726
• /
• 1987

In this paper, an adaptive IIR (infinite impulse response) notch filter of lattice type is constructed and its adaptation algorithm is proposed for the detection and retrieval of a sine wave signal embedded in noise. A modified method which adapts only one coefficient of the filter is also suggested. All these methods adapt the coefficients while keepting the poles of the filter inside the unit circle on z-plane, and thus they satisfy the condition on the stability of the IIR filter after it has converged. To investigate the convergence characteristics of these methods such as convergence speed and output S/N ratio, intensive computer simulation has been performed by varying the frequency of the sine wave and the input S/N ratio. And the results of the simulation have been compared to those of Rao and Kung's which shows relatively fast convergence speed. The methods proposed here, especially the second one. shows faster convergence speed and higher output S/N ratio than the Rao and Kung's.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.8 no.3
• /
• pp.14-20
• /
• 2011

This study aims at aligning multiple wafers to reduce wafer handling time in wafer processes. We designed a multilevel structure for a prealigner which can handle multiple wafer simultaneously in a system. The system consists of gripping parts, kinematic parts, vacuum chucks, pneumatic units, hall sensors and a DSP controller. Aligning procedure has two steps: mechanical gripping and notch finding. In the first step, a wafer is aligned in XY directions using 4-point mechanical contact. The rotational error can be found by detecting a signal in a notch using hall sensors. A dual prealigner was designed for 300mm wafers and constructed for a performance test. The accuracy was monitored by checking the movement of a notch in a machine vision. The result shows that the dual prealigner has enough performance as commercial products.