• Journal of Korean Society of Forest Science
• /
• v.80 no.3
• /
• pp.317-325
• /
• 1991

Route projection of forest road involves several constraints ranging from construction cost to environmental impacts. This study is designed to assess the capability of computer-assisted map analysis techniques for deriving several alternatives of forest road planning. Three cartographic models are presented to address the limit of slope, soil erosion, and aesthetic value in designing forest roads over a relatively small size of mountainous forest. Primary spatial analysis techniques used are distance measurements and connectivity analysis. The fundamental approach used was to generate a set of friction maps in which each friction map represents a combined restriction for a forest road projection. Products of the spatial analysis are compared by both qualitative and quantitative methods. The results demonstrate that computer-assisted map analysis has a potential to solve rather complex problems of forest road planning by providing several alternatives effectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.199-204
• /
• 2010

The purpose of this study is to estimate the effectiveness of newly proposed guide sign system. Existing guide sign system on expressways in South Korea have point-based system with city, district names or land marks. They have also several problems as excessive amount of information, low use of exit number, and lack of lane designation arrows. Efficiency of existing guide sign system is deteriorated from these problems. The enhanced guide sign system is proposed to alleviate problems. The best alternative sign system is chosen from three different designs with preference survey and human factors evaluation. The new signs showed reduced time compared to existing signs with statical significance. The existing sign system conveys more information in farther distance and less information in nearer distance. Nevertheless new systems imparts more information i nearer distance. It is also suggested that lane designation signs should be established with overhead installation at 0m point for efficient direction choice.

• Journal of Korean Society of Transportation
• /
• v.30 no.2
• /
• pp.101-116
• /
• 2012

Accident prediction models have been utilized to predict accident possibilities in existing or projected freeways and to evaluate programs or policies for improving safety. In this study, a traffic accident prediction model for freeways was developed for the above purposes. When selecting variables for the model, the highest priority was on the ease of both collecting data and applying them into the model. The dependent variable was set as the number of total accidents and the number of accidents including casualties in the unit of IC(or JCT). As a result, two models were developed; the overall accident model and the casualty-related accident model. The error structure adjusted to each model was the negative binomial distribution and the Poisson distribution, respectively. Among the two models, a more appropriate model was selected by statistical estimation. Major nine national freeways were selected and five-year dada of 2003~2007 were utilized. Explanatory variables should take on either a predictable value such as traffic volumes or a fixed value with respect to geometric conditions. As a result of the Maximum Likelihood estimation, significant variables of the overall accident model were found to be the link length between ICs(or JCTs), the daily volumes(AADT), and the ratio of bus volume to the number of curved segments between ICs(or JCTs). For the casualty-related accident model, the link length between ICs(or JCTs), the daily volumes(AADT), and the ratio of bus volumes had a significant impact on the accident. The likelihood ratio test was conducted to verify the spatial and temporal transferability for estimated parameters of each model. It was found that the overall accident model could be transferred only to the road with four or more than six lanes. On the other hand, the casualty-related accident model was transferrable to every road and every time period. In conclusion, the model developed in this study was able to be extended to various applications to establish future plans and evaluate policies.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.67-77
• /
• 2010

Growth of oil and chemical industries has been remarkable during recent years. Hazardous materials (Hazmat) make frequent use in the wide range of industries. It increases the frequency of Hazmat transport and it leads to increase the number of accidents. Optimal Hazmat routes can reduce damage. Thus, the objective of this study is to minimize the areas impacted by Hazmat accidents by adopting experts' opinion in planning the route. We calculated weights using AHP (Analytic Hierarchy Process) and deduced the best route by applying this weights. Results showed that in the case of shortest route versus weighted route, the percentage of population damage has been decreased by 33.4% in the comparison between shortest route and optimally weighted route. And the percentage of environmental damage also has been decreased by 21.8%. Social damage has been decreased by 1521.7%. In the case of none weighted route versus weighted route, the percentage of population damage has been decreased by 2.6% when we adopted weighted route. Consequently, the recommended route with weighted risk assessment avoids densely populated area comparing with none weighted route. Further research needs to be carried out in order to figure out the specific cost-effectiveness analysis applying the equal cost unit for each factor.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.87-98
• /
• 2005

Through rail transit has many merits as a safe, environmental harmonic and scheduled transit, there are many problems to construct railroads because of the public resentment. However, there is no reasonable way to settle the conflict properly and it causes enormous social and economic losses. This paper suggests a methodology to evaluate public complaint using the AHP technique, which is generally used as the methodology to evaluate public complaint using the AHP technique, which is generally used as the Multi-Criteria Decision Making (MCDM). However, the result from the AHP has some defects to control conflicts because the interests related to railroad projects are so complex that it is hard to make people persuaded easily. Therefore, this paper suggests 'the improvement ranking method', 'the sensitive analysis', and 'the assessment of independence relationship' which can aid the basic AHP to be robust. And the AHP. modified by fuzzy method, is also suggested to apply this methodology to example rail paths in Korea.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.1-9
• /
• 2012

This study proposed a method to determine the number and location of bus information terminals (BIT), which is a device to provide passengers with bus arrival time at bus stops in a Bus Information System (BIS). In low-density area, it is not efficient to survey bus demands such as the number of passengers at all bus stops due to time and cost. This kind of a survey would, however, competently cover all bus stops if performed inside the bus. The number of riding-on and -off passengers is observed for every bus stop, and this data collection is repeated over all day. Data obtained from the survey are aggregated each bus stop. This study defines Utility Index (UI), an aggregate each bus stop. Bus stops are ranked according to UI and determined for a BIT within budget limitation. As a case study, a bus line in Jeju island, Korea, was dealt with. This case showed that the more aggregate the better data quality. This study is expected to contribute to solving a location problem of BITs in a BIS.

• Journal of Korean Society of Forest Science
• /
• v.85 no.4
• /
• pp.619-633
• /
• 1996

This study was carried out from March 1995 to February 1996 to select suitable vegetation and measures for revegetation on the highway cut-slope in consideration of the surrounding environment in the middle region of Korea. The numbers of revegetation-measures type surveyed were eighteen measures as a whole in descending order of the Seed-spraying measures, Block-sod pitching measures, and Straw-mat mulching measures. The numbers of vegetation species by highway line were 243 in Chungbu, 223 in Jungang, 210 in Kyongbu 2, 199 in Kyongbu 1, 179 in Sohaean, 163 in Seoul circulation. 148 in Shingal-ansan, 141 in Second kyongin and 123 in Kyongin respectively. The highest index of species diversity(H') was in Kyongbu 1-line and the evenness(E') on upper site was greater than that of the lower site. The revegetation measures were selected in consideration of nature of soil, gradient, area and situation, and 83 species were selected as those for revegetation measures in highway cut-slope.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.672-684
• /
• 2016

UIC Codes 714R & 715R recommend the use of line classifications and their usage in maintenance work by employing notional traffic loads. However, the classification has not been applied to local lines and, therefore, a new line classification system based on UIC 714R has been proposed in this study. For this, various classification models of UIC, Germany, and UK have been studied first and equivalent traffic loads based on Korail's report, as well as on train timetables, have been derived. The results of the classifications have been compared with those of major European countries and it has been shown that the proposed classification is equivalent to the average value in the European cases. The line classification can be fully utilized during the decision making process of maintenance work and will also be used to model the Reliability Centered Maintenance (RCM) in the future.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.8
• /
• pp.611-618
• /
• 2009

Road construction has been worked on by focusing on cost effectiveness such as the reduction of construction costs without understanding the natural environment and ecosystems. In addition, since ecosystems have been destroyed and the habitats of animals and plants have been isolated, wild animals have sought other habitats or have moved into isolated habitats. Thus, issues such as roadkills or the extermination of species are increasingly occurring. Based on this background, the development and application of a general assessment method need to be researched in order to verify whether or not spaces or habitats where animals can be inhabited and their species can be maintained exist. The purpose of this study is to develop an ecosystem map where a conservation value evaluation method considering the functions of an ecosystem where animals live as well as the naturalness of ecosystems is used and can be made into a drawing. The items applied to evaluate the habitat conservation values were naturalness, rarity, and functionality, and sub-items for evaluation were created. GIS as well as the evaluation items were used to create a digital map about the level of importance based on the evaluation criteria. The created digital map showed that it was not limited to the adjustment or distribution of the fauna and flora but was applicable for a general ecosystem evaluation method for the conservation of habitats. It is expected that the isolation of habitats would be able to be minimized if the digital map is used for road construction projects. The digital map is deemed to be able to be used for the construction of environmentally friendly roads, which will minimize the destruction of ecosystems and the isolation of habitats for creatures.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.6
• /
• pp.22-33
• /
• 2009

This study was undertaken to provide a basis for planning trail standards, providing rights of movement, improvement of health and the experience of nature for at-risk walkers for application to the Umyen Park site. This study researched related laws, manuals, scholastic writing and the established site, a raku-raku mountain trail in Osata, Japan. By referencing these results and similar standards, a conceptual trail plan for at-risk walkers was created. The plan suggests five points -- accessibility, convenience, social aspects, economic efficiency, and environmentally-friendliness -- and referenced an evaluation of outdoor living environments for the elderly. The planning standards are comprised of four steps that are ranked in order and are related to the selection of location, trail structure, route patterns, and equipment. Plans for trails catering to at-risk walkers in Umyen Park were then based on these standards. As a result, it was found that the mountain has both a high elevation and abundant natural resource, both of which must be taken into account during planning. This study is valuable because it is one of the first studies of trail plans for at-risk walkers made in mountainous urban parte. Subsequent research can use the standards of this study for further evaluation while future modifications must reflect changing needs and details.