• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.32-40
• /
• 2006

It is very important to establish a pairwise key securely in wireless sensor networks. Because sensor networks consist of devices with weak physical security, they are likely to be compromised by an attacker. However, some approaches using key pre-distribution and other approaches using one hop local keys are known to be very vulnerable to threats caused by compromised nodes, even a small number. This paper proposes a scheme where each node establishes three hop local keys and employs them for a later pairwise key establishment. When any two nodes agree a pairwise key, all nodes on the route between two nodes contribute to the agreement of the pairwise key. Here, the initial three hop local keys are employed for encrypting a secret key delivered from a node to other nodes. Therefore, the proposed scheme bothers attackers to compromise much more nodes than the scheme using one hop local keys only. The simulation results have proven that the proposed scheme provides better performance and higher security than the scheme using one hop local keys in terms of message exchange, the number of encryption and decryption, and pairwise key exposure rate.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.419-429
• /
• 2013

The Wireless sensor network(WSN) consisting of a large number of sensors aims to gather data in a variety of environments. The sensor nodes operate on battery of limited power. so, To extend network life time is major goals of research in the WSN. In this paper, we state the key point of a energy consumption with minimum&load balancing. The proposed protocol guarantee balance of number of cluster member nodes using the node memory threshold and optimization of distribution of cluster head using the optimized clustering method. The results show that the proposed protocol could support the load balancing and high energy efficiency by distributing the clusters with a reasonable number of member nodes. The simulation results show that our schme ensure longer life time in WSN as compare with existing schemes such as LEACH and CBLM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8B
• /
• pp.777-785
• /
• 2009

In recent wireless sensor networks, stationary nodes and mobile nodes co-exist to provide a diverse service. However, because there are multiple mobile nodes located in the wireless sensor network, there is a potential for the instability due to the frequent network reconfiguration and the traffic caused by densely concentration of mobile nodes while mobile nodes are switching locations. In order to solve this problem, we propose the pumping node architecture to solve this traffic congestion problem due to the crowds of mobile nodes. The pumping node can be reduced heavy traffic by pumping through the backbone network caused by the densely concentration of the mobile nodes. As a result, the architecture reduces the traffic in the sensor network with high reliability.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.4
• /
• pp.87-97
• /
• 2019

SRS was proposed for immediate processing of the meaning of sensor data on mobile devices independent from specific sensor networks and sensor type. However, each time new sensor data is received, sensor data inspection operations are performed repeatedly, and it cause resulting in low performance. App profile-based SRS has been proposed to resolve the problem. The app profile-based SRS has improved the SRS problem through the profile, but has been tested in a virtual simulation environment. After that the test was experimented in a real-time environment, but has not been tested with a variety of dynamic factors. Therefore, this paper experiment considering such as user mobility and sensor density in real-time environment. And this paper also evaluate performance of the App profile-based through analysis of the results of the experiment. As a result, app profile-based SRS is high influence by density and sensor type, and the number of sensor node is not influence.

• Journal of KIISE:Software and Applications
• /
• v.26 no.2
• /
• pp.273-283
• /
• 1999

래스터 지도에서 직선 또는 곡선과 중첩되어 있는 경우의 문자는 추출하기가 쉽지 않다. 따라서 본 논문에서는 고립되어 있는 문자뿐만 아니라 문자이외의 요소와 중첩되어 있는 문자도 효과적으로 추출할수 있는 분할 정복(divide and conquer) 개념에 기반한 문자 추출방법을 제시한다. 이를 위해 먼저 이미지의 연결 요소로부터 볼록다각형(convex hull)을 생성한다. 그리고 이 다각형이 충분한게 문자영역만을 포함할때가지 볼록 다각형을 이등분하면서 가장 긴 선분(투사 선분)을 기준으로 두 영역으로 분할한다. 다음으로 문자를 추출하기 위해서 이 선분을 기준으로 연결 요소상의 픽셀의 밀집도를 계산하는 알고리즘(프로파일링)을 적용한다. 또한 지도상에서 추출된 개별적인 문자들을 의미있는 단어들로 묶기(grouping)한 새로운 알고리즘을 소개한다. 특히 지도상에 나타나는 문자의 종류는 매우 다양하고 또한 이 문자들이 놓여있는 방향 역시 일정하지 않기 때문에 이러한 단어를 찾는 kd법은 쉽지 않다. 이를 위해 본 논문에서는 3차원 인접 그래프(3-D neighborhood graph)G를 소개한다. 이 그래프 G에서 각 노드는 하나의 분리된 문자를 나타내며 자신의 크기와 위치에 따라서 3차원 공간상에서 위치하게된다. 따라서, 크기가 큰 (작은)문자들은 보다 큰 (작은) z값을 가지고 되며 이 그래프 G에서 서로 인접한 노드들을 연결함으로써 지도상에 존재하는 서로 다른 종류의 문자 스트링을 추출할수 있다. 실험결과는 서로 다른 지도 이미지에 대해서 약 95% 이상의 단어 추출율을 보여준다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.499-501
• /
• 2005

일반적인 센서 네트워크는 제한된 에너지와 밀집한 노드 특성을 보인다. 센서 네트워크에서 가장 중요한 이슈 중의 하나는 제한된 에너지의 효율을 높여 네트워크의 수명을 오래 유지하는 것이다. 이를 위하여 클러스터 기반의 센서 네트워크를 구성 함으로서 네트워크 수명을 연장 하는 방법들이 제시 되고 있다. 그러나 이러한 방법은 맵 상태를 고려하지 않으므로 전체적인 네트워크 수명 측면에서는 비효율적이다. 본 논문에서는 에너지 효율적인 클러스터 기반의 센서 네트워크를 구성하기 위하여, 센서 노드의 잔여 에너지와 이웃 노드의 수를 고려한 클러스터 헤더 선정 기법을 제안한다. 제안된 기법으로 클러스터 헤더를 선정함으로써 효과적인 데이터 수집과 전송을 할 수 있다.

• The KIPS Transactions:PartC
• /
• v.17C no.4
• /
• pp.379-384
• /
• 2010

Mobile nodes in high mobility ad hoc networks might come together in specific areas. In non-uniformly distributed networks, traffic load can be concentrated to intermediate nodes between dense clusters, and networks performance can be degraded. In this paper, we proposed a cluster based routing protocol that heavy traffic nodes adaptively react according to traffic load. The simulation result shows that the proposed protocol reduce packet loss and end-to-end delay.

• Journal of Korea Multimedia Society
• /
• v.9 no.11
• /
• pp.1421-1434
• /
• 2006

Spatial data warehouses provide analytical information for decision supports using SOLAP (Spatial On-Line Analytical Processing) operations. Many researches have been studied to reduce analysis cost of SOLAP operations using pre-aggregation methods. These methods use the index composed of fixed size nodes for supporting the concept hierarchy. Therefore, these methods have many unused entries in sparse data area. Also, it is impossible to support the concept hierarchy in dense data area. In this paper, we propose a dynamic pre-aggregation index method based on the spatial hierarchy. The proposed method uses the level of the index for supporting the concept hierarchy. In sparse data area, if sibling nodes have a few used entries, those entries are integrated in a node and the parent entries share the node. In dense data area, if a node has many objects, the node is connected with linked list of several nodes and data is stored in linked nodes. Therefore, the proposed method saves the space of unused entries by integrating nodes. Moreover it can support the concept hierarchy because a node is not divided by linked nodes. Experimental result shows that the proposed method saves both space and aggregation search cost with the similar building cost of other methods.

• The KIPS Transactions:PartA
• /
• v.18A no.4
• /
• pp.123-128
• /
• 2011

As the global grid has grown in size, large-scale distributed data analysis schemes have gained momentum. Over the last few years, a number of methods have been introduced for allocating data intensive tasks across distributed and heterogeneous computing platforms. However, these approaches have a limited potential for scaling up computing nodes so that they can serve more tasks simultaneously. This paper tackles the scalability and communication delay for computing nodes. We propose a distributed data node for storing and allocating the data. This paper also provides data provisioning method based on the steady states for minimizing the communication delay between the data source and the computing nodes. The experimental results show that scalability and communication delay can be achieved in our system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2B
• /
• pp.107-116
• /
• 2006

In this paper, we propose a Sensing Resolution-based Grouping(SRG) protocol for wireless sensor networks. SRG is intended for meeting the application's sensing objectives, where sensor nodes are densely deployed and have the determinate accuracy requirement. The primary contribution of this paper is active group header node selection and round-robin procedure, which increase the sensing accuracy and evenly distribute the node energy consumption. The second contribution is use of energy efficient intermediate node selection by considering group size and energy consumption. We present the design principle of SRG and provide simulation results.