• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.10
• /
• pp.724-739
• /
• 2009

This paper suggests the energy-efficient message delivery scheme and the software platform which exploits the multiple network interfaces of the mobile terminals and GPS in the current mobile devices. The mobile terminals determine the delivery method among 'direct', 'indirect', and 'WAN' based on the position information of itself and other terminals. 'Direct' method sends a message directly to the target terminal using local RAT. 'Indirect' method extends the service area by exploiting intermediate terminals as relay node. If the target terminal is too far to reach through 'direct' or 'indirect' method, the message is sent using wireless WAN technology. Our proposed scheme exploits the position information and, thus, power consumption is drastically reduced in determining handover time and direction. Network simulation results show that our proposed delivery scheme improves the message transfer efficiency and the handover detection latency. We implemented a message platform in a smart phone realizing the proposed delivery scheme. We compared our platform with other typical message platforms from energy efficiency aspect by observing the real power consumption and applying the mathematical modeling. The comparison results show that our platform requires significantly less power.

• Journal of Internet Computing and Services
• /
• v.10 no.3
• /
• pp.27-33
• /
• 2009

With the upcoming u-healthcare era, a way of measurement for vital sign monitoring of cardiac patients is changing as well. In existing measurement of cardiac patients, various wire in ECG measuring equipment has caused much discomfort and inconvenience. In order to decrease the problem, we are developing an efficient measurement of ECG signal using Wireless sensor network. In this paper, we present a way to reduce amount of data by transmitting ECG data collected from radio electrocardiogram sensor based on Zigbee after calculating cardiac rate. And in order to control the error which can be caused by the different ECG signal intensity each individual can has, we also suggest an adaptive pulse measurement model which can measure heart rate with correcting according to different ECG intensity. To verify the suggested model, sensor application was developed and the data was acquired in TinyOS 2.0 environment and the adaptive pulse measurement model was evaluated through the data from the experiments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.159-160
• /
• 2012

지난 30년 동안 플래시 메모리의 주류 역할을 하였던 부유 게이트 플래시 메모리는 40 nm 기술 노드 이하에서 셀간 간섭, 터널 산화막의 누설전류 등에 의한 오동작으로 기술적 한계를 맞게 되었다. 또한 기존의 비휘발성 메모리는 동작 시 높은 전압을 요구하므로 전력소비 측면에서도 취약한 단점이 있다. 그러나 이러한 문제점들을 기존의 Si기반의 소자기술이 아닌 새로운 재료나 공정을 통해서 해결하려는 연구가 최근 활발하게 진행되고 있다. 특히, 플래시 메모리의 중요한 구성요소의 하나인 터널 산화막은 메모리 소자의 크기가 줄어듦에 따라서 SiO2단층 구조로서는 7 nm 이하에서 stress induced leakage current (SILC), 직접 터널링 전류의 증가와 같은 많은 문제점들이 발생한다. 한편, 기존의 부유 게이트 타입의 메모리를 대신할 것으로 기대되는 전하 포획형 메모리는 쓰기/지우기 속도를 향상시킬 수 있으며 소자의 축소화에도 셀간 간섭이 일어나지 않으므로 부유 게이트 플래시 메모리를 대체할 수 있는 기술로 주목받고 있다. 특히, TBM (tunnel barrier engineered memory) 소자는 유전율이 큰 절연막을 적층하여 전계에 대한 터널 산화막의 민감도를 증가시키고, 적층된 물리적 두께의 증가에 의해 메모리의 데이터 유지 특성을 크게 개선시킬 수 있는 기술로 관심이 증가하고 있다. 본 연구에서는 Si3N4/Ta2O5를 적층시킨 staggered구조의 tunnel barrier를 제안하였고, Si기판 위에 tunnel layer로 Si3N4를 Low Pressure Chemical Vapor Deposition (LPCVD) 방법과 Ta2O5를 RF Sputtering 방법으로 각각 3/3 nm 증착한 후 e-beam evaporation을 이용하여 게이트 전극으로 Al을 150 nm 증착하여 MIS- capacitor구조의 메모리 소자를 제작하여 동작 특성을 평가하였다. 또한, Si3N4/Ta2O5 staggered tunnel barrier 형성 후의 후속 열처리에 따른 전기적 특성의 개선효과를 확인하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.1
• /
• pp.49-54
• /
• 2011

In this paper, we represent a mobile robot which can recognize chemical odor, measure concentration, and track its source indoors. The mobile robot has the function of smell that can sort several gases in experiment such as ammonia, ethanol, and their mixture with neural network algorithm and measure each gas concentration with fuzzy rules. In addition, it can not only navigate to the desired position with vision system by avoiding obstacles but also transmit odor information and warning messages earned from its own operations to other nodes by multi-hop communication in wireless sensor network. We suggest the way of odor sorting, concentration measurement, and source tracking for a mobile robot in wireless sensor network using a hybrid algorithm with vision system and gas sensors. The experimental studies prove that the efficiency of the proposed algorithm for odor recognition, concentration measurement, and source tracking.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.599-607
• /
• 2021

Street-view images, which are omnidirectional scenes centered on a specific location on the road, can provide various obstacle information for the pedestrians. Pedestrian network data for the navigation services should reflect the up-to-date obstacle information to ensure the mobility of pedestrians, including people with disabilities. In this study, the object detection model was trained for the bollard as a major obstacle in Seoul using street-view images and a deep learning algorithm. Also, a process for updating information about the presence and number of bollards as obstacle properties for the crosswalk node through spatial matching between the detected bollards and the pedestrian nodes was proposed. The missing crosswalk information can also be updated concurrently by the proposed process. The proposed approach is appropriate for crowdsourcing data as the model trained using the street-view images can be applied to photos taken with a smartphone while walking. Through additional training with various obstacles captured in the street-view images, it is expected to enable efficient information update about obstacles on the road.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1863-1871
• /
• 2022

In the era of Fourth Industrial Revolution, secure networking technology is playing an essential role in the defense weapon systems. Encryption technology is used for information security. The safety of cryptographic technology, according to Kerchoff's principles, is based on secure key management of cryptographic technology, not on cryptographic algorithms. However, traditional centralized key management is one of the problematic issues in battlefield environments since the frequent movement of the forces and the time-varying quality of tactical networks. Alternatively, the system resources of each node used in the IoBT(Internet of Battlefield Things) environment are limited in size, capacity, and performance, so a lightweight key management system with less computation and complexity is needed than a conventional key management algorithm. This paper proposes a novel key escrow scheme in a lightweight manner for the IoBT environment. The safety and performance of the proposed technique are verified through numerical analysis and simulations.

• Journal of KIISE:Information Networking
• /
• v.33 no.4
• /
• pp.333-342
• /
• 2006

The cdma2000 lxEV - DO mobile communication system provides broadcast and multicast services (BCMCS) to meet an increasing demand from multimedia data services. The servicing of video streams over a BCMCS network must, however, face a challenge from the unreliable and error-prone nature of the radio channel. The BCMCS network uses Reed-Solomon coding integrated with the MAC protocol for error recovery. We analyze this coding technique and show that it is not effective in the case of slowly moving mobiles. To improve the playback quality of an MPEG-4 FGS video stream, we propose the Hybrid error recovery scheme, which combines Reed-Solomon with ARQ, using slots which are saved by reducing the Reed-Solomon coding overhead. The target packets to be retransmitted are prioritized by a utility function to reduce the packet error rate in the application layer within a fixed retransmission budget. This is achieved by considering of the map of the error control block at each mobile node. The proposed Hybrid error recovery scheme also uses the characteristics of MPEG-4 FGS (fine granularity scalability) to improve the video quality even when conditions are adverse: slow-moving nodes and a high error rate in the physical channel.

• Information Systems Review
• /
• v.13 no.2
• /
• pp.1-16
• /
• 2011

Recently, many companies have started to manage and support CoPs formally at the organizational level because of strategic usability of CoP. These companies are also seeking ways to motivate CoP members to actively participate in their groups. Accordingly, this paper proposes one way of increasing CoP activities by rearranging CoP members. In practice, active CoP members often lead their groups. Therefore, rearranging members can, eventually, be one method to motivate more individuals to participate in CoP activities. This paper first suggests a new approach in order to improve knowledge sharing activities at the organizational level based on rearranging members of current CoPs. Second, a mathematical model is presented which maximizes total BLS (Balanced Level Score) of company A with several constraints. Then a real world problem is changed to a popular problem, VRP to solve this problem. Third, the solution program was developed to find a meaningful solution.

• Journal of Internet Computing and Services
• /
• v.15 no.3
• /
• pp.63-69
• /
• 2014

For the safety messages in IEEE 802.11p vehicles network environment(WAVE), strict periodic beacon broadcasting requires status advertisement to assist the driver for safety. WAVE standards apply multiple radios and multiple channels to provide open public road safety services and improve the comfort and efficiency of driving. Although WAVE standards have been proposed multi-channel multi-radio, the standards neither consider the WAVE multi-radio environment nor its effect on the beacon broadcasting. Most of beacon broadcasting is designed to be delivered on only one physical device and one control channel by the WAVE standard. also conflict-free channel assignment of the fewest channels to a given set of radio nodes without causing collision is NP-hard, even with the knowledge of the network topology and all nodes have the same transmission radio. Based on the latest standard IEEE 802.11p and IEEE 1609.4, this paper proposes an interference aware-based channel assignment algorithm with Nash bargaining solution that minimizes interference and increases throughput with wireless mesh network, which is deigned for multi-radio multi-cahnnel structure of WAVE. The proposed algorithm is validated against numerical simulation results and results show that our proposed algorithm is improvements on 8 channels with 3 radios compared to Tabu and random channel allocation algorithm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.295-302
• /
• 2011

Ubiquitous is an information communication environment which peoples could connect on network without being conscious of the network and computer condition at anytime and anywhere. Presently, advanced technology, digital cities and eco-friendly cities using Ubiquitous technology are being focused through out the world. As recent information industry and communication technology have developed remarkably, studies on intelligent structures and structural maintenance methods by combining a general idea of connecting all objects on network by interpolating computers which is called Ubiquitous Computing, and USN(Ubiquitous Sensor Network) are being attempted. In this paper, a basic experiment on penetration of RF(Radio Frequency) sensor nodes using an experimental sample setting concrete and reinforcing bar as variables is studied to estimate the possibility of applying wireless sensor networks in structures. The spring of reinforcing bars, concrete thickness, intensity of radio frequency were set up as variables, transmitting and receiving distance were checked vertically and horizontally. Moreover, Spectrum Analyzer was used for checking the magnitude of the frequency used in order to measure the reduction of radio wave exactly. The radio wave reduction was numerically analyzed, and the influence of the wavelength was analysed as well. As a result, the penetration depth in concrete without reinforcing bars was 45cm, and in reinforced concretes which reinforcing bars placed at spacing of 5cm and 15cm, the penetration depth were 37cm and 45cm each. No influence on radio wave penetration depth were found when the spacing of reinforcing bars in the reinforced concrete structures becomes over 15cm.