• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3813-3820
• /
• 2014

Recently, with the increase in electrical consumption and the unbalanced power demand and supply, the power reserve rate is becoming smaller and the reliability of the power supply is deteriorating. Under this circumstance, a Battery Energy Storage System (BESS) is considered to be an essential countermeasure for demand side management. On the other hand, an economic evaluation is a critical issue for the introduction of a power system because the cost of BESS is quite high. Therefore, this paper presents economic evaluation method for utility use by considering the best mix method and successive approximation method, and an economic evaluation method for customer use by considering the peak shaving function based on the real time price. From a case study on a model power system and educational customer, it was confirmed that the proposed method is a practical tool for the economic analysis of BESS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.9-17
• /
• 2020

Recently, RES (renewable energy source) projects have been spreading all over the world as an alternative to solve the shortage of energy and environmental problems caused by fossil fuel consumption. The Korean government also supported the policy and demonstration project to increase the proportion of renewable energy to 63.8[GW] until 2030, which is 20[%] of the total power generation. On the other hand, output loss of a PV array can occur when the surrounding high-rise buildings and trees shade a PV array. Therefore, this paper proposes an algorithm to improve the output loss of a PV array, which electrically changes a circuit configuration of PV modules by wiring and switching devices. Furthermore, this study modeled a PV system based on PSIM S/W, which was composed of a PV array, a circuit configuration device, and a grid-connected inverter. From the simulations results with the modeling and test device, the existing method showed no output when 50% of the shade occurs in PV modules. In contrast, the proposed method could produce the output because the voltage in the PV module could be restored to 246[V], and the operation efficiency of the PV system could be improved by the operation algorithm of the circuit configuration device.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.704-712
• /
• 2016

Recently, the installation of photovoltaic (PV) systems has been increasing due to the worldwide interest in eco-friendly and infinitely abundant solar energy. However, the output power of PV systems is highly influenced by the surrounding environment. For instance, a string of PV systems composed of modules in series may become inoperable under cloudy conditions or when in the shade of a building. In other words, under these conditions, the existing control method of PV systems does not allow the string to be operated in the normal way, because its output voltage is lower than the operating range of the grid connected inverter. In order to overcome this problem, we propose a new control method using a DC-DC voltage regulator which can compensate for the voltage of each string in the PV system. Also, based on the PSIM S/W, we model the DC-DC voltage regulator with constant voltage control & MPPT (Maximum Power Point Tracking) control functions and 3-Phase grid connected inverter with PLL (Phase-Locked Loop) control function. From the simulation results, it is confirmed that the present control method can improve the operating efficiency of PV systems by compensating for the fluctuation of the voltage of the strings caused by the surrounding conditions.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.663-666
• /
• 2015

In this research, botanical extracts containing green tea, Saururus chinensis and Prunus padus were tested to see possibility as shampoo. Leaves of Green tea and Saururus chinensis were extracted with hot water. Prunus padus bark extract was applied reverse osmosis and ultrasonic extraction. When interfacial tension was measured among shampoo including botanical extracts, Sodium dodecylsulfate(SDS) and Quillaja Bark Saponin(QBS), that of shampoo was lower than that of SDS and QBS at lower concentration, however, it showed similar interfacial tension at 100% concentration. Shampoo showed moderate antimicrobial activity in Staphylococcus aureus and Candida albicans. Botanical extract did not indicate cell toxicity up to $350{\mu}g/ml$ concentration in MTT assay. Shampoo containing botanical extract was stable for 3 months, however, it showed considerable variation in pH and viscosity. In conclusion, shampoo containing botanical extract shows strong possibility for natural shampoo if the formulation is modified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.738-744
• /
• 2017

Recently, the installation of energy storage systems (ESSs) has increased in parallel with the extension of renewable energy resources. However, there has been no concrete analysis ofthe performance verification and economic evaluation of ESSs,which makes it difficult to perform aneffective installation and operation of an ESS. In particular, there are no international technical standards and guidelines on electric ESS for frequency regulation applications. Therefore, acomprehensive study on the power quality, impact on grid, extent of contribution, and cost benefit study of ESS are strongly being required. Under these backgrounds, this paper proposes a performance verification algorithm on ESS for frequency regulation application based on ananalysis of the AGC(Automatic Generation Control) performance verification method of PJM in USA. In addition,this paper proposes an economic evaluation algorithm on a 500 MW installation of ESS for frequency regulation applications using the account settlement of an expensive gas-fired generation plant and coal-fired power generation plant. From the simulation with real ESS operation data and 500 MW installation case, it wasconfirmed that the ESS showssuperior performance toany other conventional generators and provides anannual benefit of 500 MW ESS are between 345~429 billon won.

• Resources Recycling
• /
• v.9 no.1
• /
• pp.52-62
• /
• 2000

In order to maximize the recycling of converter slag to the more valuable fields, such as high quality aggregates for construction, cement industry and flux for ion making. It will be very important to control the compositions and properties of converter slag to suit the purpose of utilizastion. In this study, converter slag (STELCO, CANADA) was mixed with 5%~30% $SiO_2$and 7% carbon, and then reduced at $1650^{\circ}C$. After the reduction was completed, the reformed slags were cooled to room temperature in the furnace. All of the slags were then characterized using SEM-EDX, XRD and chemical analysis. Also the compressive strengths and densities of the reformed slags were measured to compare with natural aggregates. XRD analysis shows that th phases of reformed slags are changed from bredigite+merwinite mixed phases of 10% $SiO_2$added reduction to akermanite phases of 20% and 30% $SiO_2$ added reduction. But the SEM-EDX analysis revealed that the phase distribution of the reformed slags was changed very sensitively and complicately depends on the change of slag compositions. And also the properties of reformed slags are changed very much depend on the phase distribution. About one third of Cadmium and on fifth of Vanadium are remained in reduction reformed converter slag. Another heavy metal elements such as cobalt, zinc, lead are removed up to more than 90-95% of original slag. The compressive strength and density of 25% $SiO_2$ added and reformed slag is very near to natural granite. This is superior more than 10% to Thyssen's $SiO_2$ added and oxidized converter slag aggregates.

• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.908-913
• /
• 2010

This study analyzed the impact of climatic and topographic factors on tree radial growth of Pinus densiflora and Quercus spp. in central regions of Korea. To find the relationship between annual tree radial growth and climatic factors, we took the core samples from individual trees and measured the tree radial width. On the assumption that the tree radial growth is related to the tree age, we estimated the radial growth by the tree age as an independent variable. Also, we estimated the standard growth, defined as the radial growth of trees aged 30. As results, we found the spatial auto-correlation in the radial growth of the red pine. Moreover, we also found the relationships between climatic and topographic and the standard growth using the GAM (Generalized Additive Model). Increase of temperature has negative impacts on the radial growth of Pinus densiflora, while it has positive impacts on the radial growth of Quercus spp.. On the other hands, increase of precipitation has negative impacts on the radial growth of both species. Lastly, we predicted the spatial distribution changes of Pinus densiflora and Quercus spp. using the temperature increase scenario and the Geographic Information System (GIS) based forest type map. We could predict that Pinus densiflora is more vulnerable than Quercus spp. to climate change so that the habitats of Pinus densiflora will be gradually changed to the habitats of Quercus spp. in eastern coastal and southern regions of Korea after 60 years.

• Anxiety and mood
• /
• v.11 no.2
• /
• pp.91-105
• /
• 2015

Objectives : After disaster, some people develop posttraumatic stress sequelae such as posttraumatic stress disorder (PTSD), major depression, substance use disorders, and suicide. To date, numerous screening and assessment tools for behavioral health issues including mental health problems, psychosocial maladjustment and status of recovery after disaster have been developed. In this condition, one of important topics is to choose instruments that can quickly and accurately measure the issues. Methods : This article reviewed several self-reported scales in adults for disaster behavioral health, which were searched using academic search engines like PubMed, Scopus, KoreaMed and KISS from the earliest available date of indexing through January 31, 2015. Results : More than 40 eligible instruments evaluating the disaster behavioral health issues containing posttraumatic stress sequelae, psychological and social resources, non-disaster stress, and general functions were presented in terms of availability, effectiveness, and expeditiousness. Also, we introduced basic frame aiming on practical usage, which includes standard version and brief version of the instruments for disaster behavioral health. Conclusion : We suggest the accessibility and the applicability of assessment instruments for disaster behavioral health. The systemic review of this article will provide further directions for them.

• The Journal of the Petrological Society of Korea
• /
• v.7 no.2
• /
• pp.98-110
• /
• 1998

Hongcheon magnetite deposit is embedded, as a lens shape, in biotite banded gneiss belonging to the Gyeonggi metamorphic complex. It gradationally changes to the host quartz-feldspathic banded gneiss in the mineral composition. Magnetite ore bodies are composed of magnetite ores and magnetite banded gneiss which gradationally change each other in the amount of magnetite. They consist mainly of magnetite, quartz, plagioclase and chlorite accompanied with amphibole, biotite, muscovite, monazite, apatite, ankerite, siderite, rhodochrositic dolomite, calcite and rutile. Amphibole is subdivided into hornblende, richterite and magnesio-riebekite in magnetite ores, and magnesio-, ferro- or actinolitic hornblende in magnetite banded gneiss. The variation in chemical composition may be influenced by bulk composition and controlled mainly by glaucophane $Na(M4)Al_3^{VI}=CaMg$ and richterite Na(M4)Na(A)=Ca substitutions. Biotite in magnetite banded gneiss has an annite composition. Chlorite changes in chemical composition from pycnochlorite to diabantite in magnetite ores and belongs to pycnochlorite in magnetite banded gneiss. The mafic minerals and feldspar have been strongly altered by carbonate minerals which are secondarily formed by introduced hydrothermal solution. Fe-bearing carbonate minerals can be subdivided into ankerite, siderite and rhodochrositic dolomite according to the ratio of Fe-Mg-Mn component.

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.317-324
• /
• 1996

This study was conducted to evaluate the tensile bond strength of three commercially available glass ionomer cements as orthodontic bracket adhesives. 120 premolars extracted for orthodontic treatment were prepared for bonding and standard edgewise brackets were bonded with Shofu Glaslonomer Cement (Shofu Co., U.S.A.), GC Fuji ItGC Co., Japan), KETAC-CEM(ESPE Co., West Germany) with different P/L ratio. The tensile bond strength was tested by Instron testing device after 24hours and 3months from bonding. After debracketing, bracket bases were examined to determine the failure sites. The results of this study were as follows: 1. KETAC CEM showed the highest bond strength other than measurement after 24 hours and at its original P/L ratio, and seemed to have clinically a proper bond strength. It seemed, however, that both Shofu Giaslonomer Cement and GC Fuji I had an inappropriate bond strength. 2. The incorporation of additional powder into the mixture improved the tensile bond strength. 3. Prolonged storage time improved the tensile bond strength. 4. Of the failure, failure occured at the tooth-adhesive interface(54.2%) was the most common type. The second type of failure(36.7%) was combination type, where part of the adhesive remained on the tooth and part on the bracket. And the last type of failure(9.1%) occured at the adhesive-bracket interface.