• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.8
• /
• pp.1031-1039
• /
• 2018

If large-scale PV systems are continuously interconnected to distribution system, customer voltages could violate the allowable voltage limit($220{\pm}13V$) according to reverse power flow of PV system. In order to solve these problems, this paper proposes flexible adoption evaluation algorithm of PV system in distribution system which estimates proper introduction capacity and location of ESS(energy storage system) for keeping customer voltages within allowable voltage limit based on various operating scenarios related with connecting point and capacity of PV system. And also this paper proposes modeling of ESS, SVR(step voltage regulator) and PV system using PSCAD/EMTDC S/W and analyzes characteristics of customer voltages and the adoption ability of PV system in distribution system. From the simulation results, it is confirmed that proposed algorithm is useful for large-scale adoption of PV system in distribution system to maintain customer voltages within allowable voltage limit.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.8
• /
• pp.1024-1030
• /
• 2018

Recently, the large scaled energy storage system(ESS) which has various functions such as peak saving, demand management, output stabilization of renewable energy and frequency regulation(FR) is being energetically installed and operated. Especially, as the use case of frequency regulation ESS, the KEPCO has demonstrated the total of 376[MW] ESS since 2014. However, there are no operational experiences and international technical standards on frequency regulation application in ESS. Therefore, this paper propose the evaluation algorithm for power system performance of ESS by considering the frequency characteristics between governor of existing generator and frequency regulation ESS, in order to verify the power system performance of ESS. And also, this paper propose an evaluation modeling for small scaled power system including the existing generator, frequency control ESS and customer loads based on the PSCAD/EMTDC S/W. From the simulation results in 360[MW] model power system, it is confirmed that frequency regulation ESS has better performances than conventional generators.

• Herbal Formula Science
• /
• v.28 no.2
• /
• pp.137-145
• /
• 2020

Objectives : Tetragonia tetragonioides is one of the traditional herbal medicines that can be used to protect the stomach and treat cancer. However, its mechanism of overcoming gastrointestinal disorders is unclear. In this study, we investigated antioxidant and anti-inflammatory effects of Tetragonia tetragonioides Water Extract (TTWE) on RAW264.7 cells. Methods : The cell viability by TTWE was measured by using MTT assay. The free radical scavenging ability and cytokine production were analyzed by using ELISA Kit. SPSS version 25 was used for statistical analysis. Results : According to the results of this study, the cell viability measurement of TTWE significantly affected the cell viability. The radical scavenging ability of TTWE showed the highest effect compared to the positive control group when the concentration was 3.1-12.5 ㎍/ml, and significantly inhibited NO production induced by LPS. In addition, the inhibitory effect of TTWE on the production of IL-6 and TNF-α induced by LPS was significant at both TTWE concentrations of 12.5 ㎍/ml [p <0.01 (IL-6), p <0.05 (TNF-α)]. Conclusion : In conclusion, it is suggested that the antioxidant function of Tetragonia tetragonioides Water Extract could be used to prevent and treat inflammatory diseases.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.35-41
• /
• 2015

Recoil system for 40mm automatic gun is a device developed to absorb the shock of explosion. It is impossible to conduct pinpoint strike due to recoil if very high explosive shock, which is generated when an automatic gun fires shells, can't be absorbed. This study covers development and verification of analysis model for recoil system by utilizing a multi-domain software. The research process is as in the following. First, an analysis model is developed to verify damping characteristics through understanding of design intention. Second, environment which is identical to a field test is set up on analysis tool after putting explosive force that is measured through the test into the analysis model. Finally, the analysis model for recoil system using the multi-domain software is verified if it has effectiveness with a comparison between internal pressure of the recoil system along with displacement of gun barrel and the field test result.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.2
• /
• pp.20-28
• /
• 2003

Recently we need a faster and more accurate motion vector search algorithm for ASIC(Application Specific IC) or small systems. Block motion estimation using Full Search(FS) algorithm provides the best visual quality and PSNR, but it requires intensive computations. The previously proposed fast algorithms reduced the number of computations by limiting the number of searching locations. This is accomplished at the expense of less accuracy of motion estimation and gives rise to an appreciably higher SAD(Sum of Absolute Difference) for motion compensated images. In this paper we exploit the spatial correlation of motion vectors and present a fast motion estimation scheme which uses the predicted motion vector(PMV). The PMV scheme is more clear and simpler than the previously proposed algorithms which also use adjacent motion vectors. Simulation results with standard video sequences show that the PMV scheme is faster and more accurate than other algorithms such as Nearest-Neighbors Search(NNS) algorithm.

• Journal of Drive and Control
• /
• v.15 no.2
• /
• pp.9-21
• /
• 2018

The aim of this study was to develop and test a model of an auto-sensing hydraulic breaker that can automatically change its 4-step impact mode according to the rock strength using SimulationX. The auto-sensing hydraulic breaker with a 4-step variable impact mode has the advantage of obtaining optimal impact energy and impact frequency under various rock conditions compared to an auto-sensing hydraulic breaker with a 2-step variable impact mode, which has already been developed overseas. Several steps were necessary to conduct this study. First, the operation principle of the auto-sensing hydraulic breaker with the 2-step variable impact mode was analyzed. Based on the findings, an analysis model of the auto-sensing hydraulic breaker with the 4-step variable impact mode was developed (and compared with the 2-step variable impact mode) Finally, an analysis of the results established that the stepwise variable of the impact mode was implemented according to the rock strength and the difference of each impact mode was confirmed. This study is expected to contribute to the development of auto-sensing hydraulic breakers that are superior to those developed by advanced companies in foreign countries.

• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.95-100
• /
• 2009

This study was conducted to develop an imaging processing system of inoculation processing of a lily callus. The image processing system was composed of a camera, a image processing board, and etc. And the illuminance always decided by setting up 55W/3 wavelength lamp respectively on all aspects and the side was maintained by the lighting part. The image characteristic was examined according to each frame of RGB,therefore the culture vessel was able to be separated with B frame. The required time was 2.2 seconds in one cycle from the image acquisition to obtaining the result. The recognition rate of the container was 100%, and the result of image processing showed that the recognition success rate of lily callus was 93%.

• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.87-94
• /
• 2009

This study was conducted to develop an automation system of inoculation processing of a lily callus. The results are summarized as followings: The end-effector was manufactured as suction and machine type. And these end-effectors can separate the callus from the mediums and divide the separated callus and then inoculate the divided callus to new mediums. Using the machine type end-effect0r, the results of the experiment showed the success rate in the division process was 100% while the separation and inoculation process was 92%. To develop the automation controller of inoculation process, the system was developed to control an external device and the manipulator. The data communication program between a robot and a personal computer was also developed using CAsyncsocket and Ethernet Interface.

• Journal of the Korea Society for Simulation
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2013

A higher penetration of renewable energy sources and adoption of renewable portfolio standard(RPS), the penetration of distributed generators(DGs) into power distribution network is becoming a threat for the safe operation of distribution network. The ground fault current of DGs can cause parasitic trip and mal-trip of protective device in the power distribution network. KEPRI has developed a simulation program for current setting of protective devices in DGs connected distribution network. In this study, we analyzed fault currents of a sample network in two cases, i.e. case 1 is for no DG connection, case 2 for a DG connection. We performed protection coordination for relays installed in the network and analyzed the contribution of a DG.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.1
• /
• pp.49-54
• /
• 2016

The large scaled lead-acid battery is widely used for efficient operation of the photovoltaic system in many islands. However, lithium-ion battery is now being introduced to mitigate the fluctuation of wind power and to replace lead-acid battery. Therefore, hybrid ESS (Energy Storage system) that combines lithium-ion battery with lead-acid battery is being required because lithium-ion battery is costly in present stage. Under this circumstance, this paper presents the optimal algorithm to create composition rate of hybrid ESS by considering fixed and variable costs in order to maximize advantage of each battery. With minimization of total cost including fixed and variable costs, the optimal composition rate can be calculated based on the various scenarios such as load variation, life cycle and cost trend. From simulation results, it is confirmed that the proposed algorithms are an effective tool to produce a optimal composition rate.