• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1707-1721
• /
• 2004

In this paper, we propose a distributed communication model of intrusion detection system(IDS) in which integrated security management at networks level is possible, model it at a security node and distributed system levels, design and implement a simulator. At the node level, we evaluate the transfer capability of alert message based on the analysis of giga-bit security node architecture which performs hardware-based intrusion detection. At the distributed system level, we perform the evaluation of transfer capability of detection and alert informations between components of distributed IDS. In the proposed model, we carry out the performance evaluation considering decision factors of communication mechanism and present the results in order to gain some quantitative understanding of the system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.1
• /
• pp.1-6
• /
• 2001

This paper proposes a method to reduce the timing gap which causes a type of attack to a network-based intrusion detection system. For this, an intrusion defection system is used in order to measure the round trip tin to the destination system, and the measured round trip time is used for estimation of packet's real arrival time to destination. Socket programings are used on the LAN environments to evaluate the performance of the proposed method. The test results show that an estimation method which uses the latest round trip time has the best performance, and the timing gap can be significantly reduced with small overheads.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1372-1382
• /
• 1999

The major source of errors in high-speed networks such as Broadband ISDN(B-lSDN) is buffer overflow during congested conditions. These congestion errors are the dominant sources of errors in 1high-speed networks and result in cell losses. Conventional communication protocols use error detection and retransmission to deal with lost packets and transmission errors. However, these conventional ARQ(Automatic Repeat Request) methods are not suitable for the high-speed networks since the transmission delay due to retransmissions becomes significantly large. As an alternative, we have presented a method to recover consecutive cell losses using forward error correction(FEC) in ATM(Asynchronous Transfer Mode)networks to reduce the problem. The performance estimation based on the cell discard process model has showed our method can reduce the cell loss rate substantially. Also, the performance estimations in ATM networks by interleaving and IP multicast service are discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12A
• /
• pp.971-981
• /
• 2009

The coordination of distributed entities and events requires time synchronization. Precision time synchronization enables a variety of extensions of applications and provides much accurate information. The IEEE 1588 precision time protocol (PTP) provides a standard method to synchronize devices in a network. This paper deals with the design and implementation of a PTP gateway to extend IEEE 1588 to Zigbee networks. The PTP gateway can not only extend IEEE 1588 to Zigbee networks but also share the same time reference using IEEE 1588 between two or more Zigbee networks. This paper also presents experiments and performance evaluation of time synchronization using the PTP gateway. Our result established a method for nodes in a network to maintain their clocks to within a 300 nanosecond offset from the reference clock of a master node via Ethernet.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.7
• /
• pp.572-580
• /
• 2013

IEEE 802.15.4e is a prospective standard for low latency control application in industries. This paper proposes a framework to evaluate the closed loop IEEE 802.15.4e based WNCS performance. The framework consists of two models: closed loop control system model and network model. The network model focuses on the PHY parameters of wireless link and takes the channel parameters into consideration. The PHY model combining with MAC model gives the control system model the probability of packet loss in a super-frame. In addition, redundancy mechanism is considered in IEEE 802.15.4e to reduce to data frame loss probability. The simulation is implemented in Matlab, PHY model takes the channel parameters from empirical results. Hence our evaluation gives insight into behavior of WNCS in different environments and it provides us a tool to design wireless network to achieve a good performance for control system.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.81-88
• /
• 2008

It is important to study the energy efficient MAC protocol in sensor networks. We propose a new protocol named as ELM?MAC (Energy efficient Link Management MAC) to increase energy efficiency in sensor networks. ELM-MAC protocol operates, uses, and manages the optimized transmission power level to increase energy efficiency in MAC layer. It includes mechanism that uses the adaptive method in change of surround environment for guarantee of link quality. In this paper we implement ELM-MAC and evaluate its performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.9
• /
• pp.700-706
• /
• 2013

In this paper, we propose a method for applying random linear network coding in satellite communication to improve reliability. In the proposed protocol, network-coded redundancy (NC-R) packets are transmitted in the PEP (Performance Enhancement Proxy). Therefore, if data packets is lost by wireless channel error, they can be recovered by NC-R packets. We also develop the TCP performance model of the proposed protocol and evaluate the performance of the proposed protocol. In the simulation results, It is shown that the proposed protocol can improve the TCP throughput as compared with that of the conventional TCP because the NC-R packets is sent by the sender-side PEP and the receiver-side PEP use these packets to recover the lost packets, resulting in reducing the packet loss in TCP.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.3
• /
• pp.45-58
• /
• 2020

In the current trend of increasing network traffic due to the popularization of cloud service and mobile devices, WAN bandwidth is very low compared to LAN bandwidth. In a WAN environment, a WAN optimizer is needed to overcome performance problems caused by transmission protocol, packet loss, and network bandwidth limitations. In this paper, we analyze the data deduplication algorithm of WANProxy, an open source WAN optimizer, and evaluate its performance in terms of network latency and WAN bandwidth. Also, we evaluate the performance of the two-stage compression method of WANProxy and Zstandard. We propose a new method to improve the performance of WANProxy by revising its data deduplication algorithm and evaluate its performance improvement. We perform experiments using 12 data files of Silesia with a data segment size of 2048 bytes. Experimental results show that the average compression rate by WANProxy is 150.6, and the average network latency reduction rates by WANProxy are 95.2% for a 10 Mbps WAN environment and 60.7% for a 100 Mbps WAN environment, respectively. Compared with WANProxy, the two-stage compression of WANProxy and Zstandard increases the average compression rate by 33%. However, it increases the average network latency by 2.1% for a 10 Mbps WAN environment and 5.27% for a 100 Mbps WAN environment, respectively. Compared with WANProxy, our proposed method increases the average compression rate by 34.8% and reduces the average network latency by 13.8% for a 10 Mbps WAN and 12.9% for a 100 Mbps WAN, respectively. Performance analysis results of WANProxy show that its performance improvement in terms of network latency and WAN bandwidth is excellent in a 10Mbps or less WAN environment while superior in a 100 Mbps WAN environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.754-762
• /
• 2021

Seamless wireless communication network access technology enables users to guarantee service continuity. Hence, it is necessary for disaster situations in which network service may be interrupted. The Multi-path router is a technology to improve network stability and strengthen field operability, particularly in a disaster environment where network failure can occur by providing high-performance data transmission using multi-communication networks and network security by VPN-based wireless IP. In this paper, a prototype system for an MPR-based wireless communication network was proposed to improve the operation performance for disaster field investigation applications. A comparative experiment was performed on various data transmission performances with the existing single wireless communication network. In addition, another experiment was conducted by measuring the data packet transmission and receiving performance in the existing/new wireless communication system first and then assessing the UDP transmission performance in a single router environment to understand the transmission capability of the new MPR. The experimental results showed that the sending and receiving performance was improved by approximately double that of the existing single wireless communication system. The proposed prototype system is expected to allow users to share and disseminate collected on-site data more quickly and efficiently during a disaster site investigation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.995-998
• /
• 2008

무선 통신 기술의 발전과 함께 802.11n과 같은 광대역 네트워크 인프라의 구축이 확대됨에 따라, 이에 적합한 높은 성능을 낼 수 있는 전송 계층의 프로토콜이 필요하다. 유선 환경에서 개발된 TCP(Transmission Control Protocol)는 현재 가장 널리 이용하는 전송 프로토콜이다. 하지만 높은 에러율과 긴 딜레이가 발생하는 무선 네트워크상에서는 패킷 손실의 원인을 구별하지 못하기 때문에 성능이 저하된다. 또한, 광대역폭을 지원하는 초고속 네트워크상에서 TCP가 동작할 경우 기존 무선 네트워크에서 처리하는 혼잡윈도우 값보다 커진 값을 제대로 처리하지 못하기 때문에 가용대역폭을 활용하지 못하는 문제점이 발생한다. 따라서, 본 논문에서는 초고속 네트워크 안에서 slowstart threshold에 기반하여 가용대역폭을 동적으로 획득하고, 높은 전송률을 보장하는 TCP VEST(TCP Vegas-based Estimator with Slowstart Threshold)를 제안한다. TCP VEST는 기본적으로 송신자기반 무선네트워크에서 우수한 성능을 지원하는 TCP WestwoodVT의 패킷 손실원인 구분법을 사용한다. 그리고 TCP VEST는 패킷 손실의 원인을 구분하고 각각의 경우에 따라서 전송량을 slowstart threshold 값의 변화에 맞춰 조절한다. NS-2를 통한 성능평가에서 VEST는 WestwoodVT와 비교했을 때 링크 에러율이 1%인 환경에서는 20% 이상의 전송률 향상을 나타내며, Westwood와 비교했을 때는 60%의 성능향상이 있다. 또한 초고속 네트워크에서 5%와 10% 사이의 에러율을 가질 때에는 WestwoodVT와는 50%, Westwood와는 300% 이상의 성능향상이 나타남을 보인다. 이를 통해 VEST가 기존의 무선 네트워크와 더불어 초고속 네트워크에서도 동적으로 대역폭을 획득함으로써 높은 전송률을 지원하는 것을 입증한다.