• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.55-63
• /
• 2013

Network-RTK GPS positioning technique based on national CORS(Continuous Operating Reference Station) and wireless internet access as like VRS and FKP was developed to overcome the limitations of traditional RTK technique. In Korea, NGII(National Geographic Information Institute) provides network-RTK service based on 51 CORS and mobile internet network. The purpose of this study is the accuracy evaluation of the height determined by GPS VRS technique based on network-RTK, So, in this study GPS VRS positioning was accomplished through 1st level BM line located at Sancheong~Jinju and $2^{nd}$ level BM line located at Geochang~Sancheong and the average error of the each BM line was calculated as 2.15cm and 1.80cm respectively. This result shows that GPS VRS height positioning can be used in $3^{rd}$ and 4th public BM leveling and also work regulation is needed to apply the GPS VRS height positioning.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.479-484
• /
• 2015

Network RTK is a precise positioning technique using carrier phase correction data from reference stations within the network, and is constantly being researched for improved performance. However, the study for the system accuracy has been performed but system integrity research has not been done as much as system accuracy, because network RTK has been mainly used on surveying for static or kinematic positioning. In this paper, adequate monitoring system for network RTK is designed as basis research for integrity monitoring on network RTK. To this, fault tree on network RTK is analyzed, and a countermeasure is prepared to detect and identify the each fault items. Based these algorithms, monitoring system to use on central processing facility is designed for network RTK service.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.1
• /
• pp.99-107
• /
• 2013

With the expansion of the development and use of surveying equipment recently, by the establishment of infrastructure for network RTK surveying of the NGII, network RTK surveying has been widely used in surveying industry. Currently, in public surveying regulations, site calibration with minimum 5 evenly spaced bench marks is needed for using network RTK surveying results as leveling. But the range between and the number of bench marks for site calibration can be varied according to the geoid undulation. In this study, in order to verify this, Incheon area having regular geoid undulation and Taebaek area having irregular geoid undulation are selected as study area and network RTK surveying have been done. Then the accuracy of site calibration by range between and the number of bench marks have been compared. As a result of this study, in order to meet a tolerance of vertical precision (0.1m) that has been set in public surveying regulations, there is a necessity for improving the regulations so that the range and number of bench marks, to be used for site calibration of network RTK surveying, can be applied complementarily.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2569-2575
• /
• 2015

Network RTK generally uses a linear interpolation method by using the corrections from reference stations. This minimizes the spatial decorrelation error caused by the increase of distance between the reference station's baseline and user's baseline. However, tropospheric delay, a function of the meteorological data can cause a spatial decorrelation characteristic among reference stations within a network by local meteorological difference. A non-linear characteristic of tropospheric delay can deteriorate Network RTK performance. In this paper, the modeling of tropospheric delay irregularity is made from the data when the typhoon is occurred. By using this modeling, analyzing the effect of meteorological difference between reference stations on correction is performed. Finally, we analyze an effect of non-linear characteristics of tropospheric delay among reference stations to Network RTK user.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.546-554
• /
• 2014

For improvement of network RTK performance in survey field, Spatial Information Research Institute (SIRI), LX Korea Cadastral Survey Corporation installed 30 GNSS permanent stations in Korea Peninsula, and has been running the MAC-based network RTK service as a test version. In this paper, we introduce the LX GNSS network and analyze the positioning accuracy of the LX MAC RTK service. For field test of the LX MAC RTK service, we installed temporally fixed anchor points and observed simultaneously with VRS of National Geographic Information Institute. As a result, the horizontal position differences and initial times of LX MAC with respect to NGII VRS are $1{\sim}2{\pm}1cm$ and <10 seconds, respectively.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.39-46
• /
• 2014

Network RTK positioning, one of GNSS positioning systems, is currently very popular due to its easy operation and low cost. However, the network RTK positioning unquestioningly accepts observation result acquired with an ambiguity fixed-solution regardless of different field conditions and situations, and then it is applied to the practice. This paper, therefore, has investigated the effects of field conditions obtained network RTK survey data for the area with obstacles on the variation of positioning accuracy. Being explained in detail, after conducting survey by GPS-only positioning and combined GPS/GLONASS observations giving changes to the distance from obstacles and elevation angles, and then accuracy results of each positioning method were compared each other. As a result, while GPS-only point positioning method showed more stable results than combined GPS/GLONASS method in the areas with no obstacles, combined method gave better result than GPS-only for the areas with presence of obstacles. Based on the results of this experiment, when the further study is conducted with a variety of different field conditions affecting the survey accuracy, it can be expected that the accuracy of network RTK survey method would become to more popular.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.157.1-157.1
• /
• 2012

1990년대 제안된 RTK(Real-Time Kinematics)는 GNSS/GPS 반송파 위상(carrier phase) 관측값을 이용한 방식으로 cm 수준의 정확도를 실시간으로 산출할 수 있어 측지 측량 등 다양한 분야에서 활용되고 있다. 그러나 한 가지 중요한 단점은 이 방식을 사용하는 기준국과 사용자는 10~20km 이내에 존재해야만 빠르고 신뢰할 수 있는 해를 산출할 수 있다는 점이다. 이는 궤도오차, 대류층 및 전리층 오차에 공간 상관성(spatially correlated) 있기 때문인데, 사용자 주변을 둘러싼 다중 기준국들의 측정치를 조합하여 보상하거나 모델링하여 줄이는 방식인 다중 기준국 네트워크 기반의 RTK 알고리즘이 제안되어 사용되고 있다. 다중 기준국 네트워크 기반의 RTK 프로세스에서 기준국간 미지정수 결정은 전 과정의 핵심 프로세스라고 할 수 있으며, 관련되어 많은 기술들이 제안되고 연구되어 왔다. 특히, 1980년대 말부터 현재까지 후처리 기반으로 꾸준하게 연구되고 있는 Blewitt에 의해 전리층 제거 조합과 Wide-lane 반송파 위상 조합을 활용한 미지정수 검색 방법이 대표적이며 이후에도 Gao, Colombo등 다양한 연구자에 의해 활용되었다. 이 연구에서는 실시간으로 다중 기준국 반송파 미지정수를 결정하는 기술에 대한 연구를 수행하였다. L1, L2 관측값 조합으로 인한 관측값의 잡음 수준이 증가하는 영향을 피하기 위해 L1, L2 반송파 위상 및 의사거리를 그대로 관측값으로 사용하여 사용자 위치 및 속도, 기준국간 이중 차분된 전리층 지연 수직성분, 대류층 wet 지연 수직 성분, 이중 차분된 미지정수를 미지의 상태변수로 확장 칼만필터를 통해 직접적으로 추정하는 방식으로 미지정수의 실수해를 결정하였고, 정수해는 실시간에 적합한 MLAMBDA 기법과 비율테스트를 통한 정수해 검정기법을 통해 결정하였다.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.507-514
• /
• 2015

The Spatial information research institute of the LX Korea land and geospatial informatix corporation manages infrastructure for the LX global navigation satellite system (GNSS), which comprises 30 monitoring stations nationwide. Since 2014, it has conducted network real-time kinematic (RTK) tests using the master-auxiliary concept (MAC). This study introduces the infrastructure of LX GNSS and presents the results of a performance analysis of the LX RTK service. The analysis was based on a total of 25 cadastral topographic control points in Jeonju, Seoul, and Incheon. For each point, performance was measured over one observation, two repeated observations, and five repeated observations. The measurements obtained from LX MAC and the VRS of the National Geographic Information Institute were compared with the announced coordinates derived from cadastral topographic control points. As a result, the two systems were found to have similar performance with average error and standard deviation differing only by 1 to 2 cm.

• Spatial Information Research
• /
• v.15 no.2
• /
• pp.111-121
• /
• 2007

The GPS positioning offer 3D position using code and carrier phase measurements, but the user can obtain the precise accuracy positioning using carrier phase in Real Time Kinematic(RTK). The main problem, which RTK have to overcome, is the necessary to have a reference station(RS) when using RTK should be generally no more than 10km on average, which is significantly different from DGPS, where distances to RS can exceed several hundred kilometers. The accuracy of today's RTK is limited by the distance dependent errors from orbit, ionosphere and troposphere as well as station dependent influences like multipath and antenna phase center variations. For these reasons, the author proposes Network based GPS Carrier Phase Differential Positioning using Multiple RS which is detached from user receiver about 30km. An important part of the proposed system is algorithm and software development, named DAUNet. The main process is corrections computation, corrections interpolation and searching for the integer ambiguity. Corrections computation of satellite by satellite and epoch by epoch at each reference station are calculated by a Functional model and Stochastic model based on a linear combination algorithm and corrections interpolation at user receiver are used by area correction parameters. As results, the users can obtain the cm-level positioning.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.705-713
• /
• 2011

In this paper, we introduce two techniques for resolving integer ambiguities between reference stations, which is one of the most important processes in Network RTK correction generation process. Each techniques uses Hatch filter and combination of L1/L2 measurements and we used simulation data and real data to evaluate performance of the techniques. For evaluating performance of each technique, we compared corrections generated from user site and Network RTK. As a result, Network RTK with the technique which uses Hatch filter improves user performance much more than single baseline RTK does. Residual of user is smaller than a half size of wavelength so it does not affect user integer ambiguity resolution, however, it contains significant bias error. On the other hand, when we used the technique which uses combination of L1/L2 measurements, residual error of user is largely reduced compared to the technique using Hatch filter.