• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.149-162
• /
• 2005

This paper suggest a way to detect a specific wanted figure in public places such as subway stations and banks by comparing color face images extracted from the real time CCTV with the face images of designated specific figures. Assuming that the characteristic of the surveillance camera allows the face information in screens to change arbitrarily and to contain information on numerous faces, the accurate detection of the face area was focused. To solve this problem, the normalization work using subsampling with $20{\times}20$ pixels on arbitrary face images, which is based on the Perceptron Neural Network model suggested by R. Rosenblatt, created the effect of recogning the whole face. The optimal linear filter and the histogram shaper technique were employed to minimize the outside interference such as lightings and light. The addition operation of the egg-shaped masks was added to the pre-treatment process to minimize unnecessary work. The images finished with the pre-treatment process were divided into three reception fields and the information on the specific location of eyes, nose, and mouths was determined through the neural network. Furthermore, the precision of results was improved by constructing the three single-set network system with different initial values in a row.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.42-52
• /
• 2017

DASH (Dynamic Adaptive Streaming over HTTP) is an adaptive streaming technique that enables transmission of multimedia content when clients request the multimedia contents to server. In this system, to ensure the best quality of the content to satisfy users, it is necessary to precisely measure the residual bandwidth. However, the measured residual bandwidth by the DASH, which is not considering the transmission features of TCP, varies by the size of previous media segment, which makes it hard to ensure QoE to users. In this paper, we excluded the TCP Slow start range from measurement of residual bandwidth and suggested the new DASH bandwidth measuring method to decrease the error. Then, we realized the method in DASH system based on open source, and compared the existing measuring method. The new method showed that the accuracy of result has increased by 20%. Also, it could improve the QoE of users in terms of service quality and number of changes of segment quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1380-1386
• /
• 2009

In this paper, we propose a CQS(Calendar Queue Scheduler) architecture which was designed for processing multimedia and timing traffic in home network. With various characteristics of the increased traffic flowed in home such as VoIP, VOD, IPTV, and Best-efforts traffic, the needs of managing QoS(Quality of Service) are being discussed. Making a group regarding application or service is effective to guarantee successful QoS under the restricted circumstances. The proposed design is aimed for home gateway corresponding to the end points of receiver on end-to-end QoS and eligible for supporting multimedia traffic within restricted network sources and optimizing queue sizes. Then, we simulated the area for each module and each memory. The area for each module is referenced by NAND($2{\times}1$) Gate(11.09) when synthesizing with Magnachip 0.18 CMOS libraries through the Synopsys Design Compiler. We verified the portion of memory is 85.38% of the entire CQS. And each memory size is extracted through CACTI 5.3(a unit in mm2). According to the increase of the memory’sentry, the increment of memory area gradually increases, and defining the day size for 1 year definitely affects the total CQS area. In this paper, we discussed design methodology and operation for each module when designing CQS by hardware.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.1
• /
• pp.88-95
• /
• 2009

This paper presents a traffic pattern matching hardware that can be used in high performance network applications. The presented hardware is designed for a contents security system which is to block various kinds of information drain or intrusion activities. The hardware consists of two parts: the header lookup and string pattern matching parts. For implementing the header lookup part in hardware, the TCAMs(ternary CAMs) are popularly used. Since the TCAM approach is inefficient in terms of the hardware and memory costs and the power consumption, however, we adopt and modify an alternative approach based on the comparator arrays and the HiCuts tree. Our implementation results, using Xilinx FPGA XC4VSX55, show that our design can reduce the usage of the FPGA slices by about 26%, and the Block RAM by about 58%. In the design of string pattern matching part, we design and use a hashing module based on cellular automata, which is hardware efficient and consumes less power by adaptively changing its configuration to reduce the collision rates.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.6
• /
• pp.88-96
• /
• 2011

Underwater acoustic communication is applicable in various areas, such as ocean data collection, undersea exploration and development, tactical surveillance, etc. Thus, robot control system construction used for underwater-robot like AUV or ROV is essential in these areas. In this paper, we propose the Message Merging MAC($M^2$-MAC) protocol, which is suitable for real time robot control system, considering energy efficiency in important parts of underwater acoustic sensor network constitution. In this proposed MAC protocol, gateway node receives the data from robot nodes according to the time slots that were allotted previously. And messages delivered from base-station are generated to one MAC frame by buffering process. Finally, generated MAC frames are broadcasted to all robot nodes in the cluster. Our suggested MAC protocol can also be hybrid MAC protocol, which is successful blend of contention based and contention-free based protocol through relevant procedure with Maintenance&Sleep (M&S) period, when new nodes join and leave as an orphan. We propose mathematical analysis model concerned about End-to-End delay and energy consumption, which is important factor in constructing real-time robot control system. We also verify the excellence of performance according to comparison of existing MAC protocols with our scheme.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.1-8
• /
• 2011

The parking guidance system can increase driver's convenience with detailed parking information service, but it continuously consumes electrical energy with large amount of sensors, displays and control modules. With the increase of the demand for green and sustainable building design, it becomes a meaningful issue for parking guidance system to reduce operating power. This paper presents the preliminary design and estimated results of a parking guidance system which is optimized to reduce the power consumption mainly on detectors and displays. The system design is based on commercial wireless parking detectors, wireless-loop-detector and earth-magnetic-detector. We have performed system architecture design, communication network design, parking information service scenario planning, battery life regulation and at last operating power estimation. With the 7 years of battery replace cycle, the estimated result for power consumption of designed system was 0.33W/slot, which is 13% of the traditional system's estimation result. The estimated annual maintain cost was similar to the traditional ultrasonic sensor based system's. The low power operable designed system can be expected to reduce CO2 emission.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.257-264
• /
• 2012

In this paper, we propose a Route Stability-based Direction Guided Routing protocol(RSDGR) in mobile ad-hoc wireless networks. The main features and contributions of the proposed routing protocol are as follows. First, it can calculate link stability between two nodes as well as route stability of multi hop quantitatively by using nodes' mobility. And this protocol can establish the most stable path between a source node and a destination node. Second, according to the route stability between a source node and a destination node, it can control and optimize the direction guided region dynamically for route setup. Third, we suggest theoretical model for quantitative calculation of link stability between two nodes and route stability of multi hop path. The performance evaluation of the proposed routing protocol is performed by simulation using OPNET(Optimized Network Engineering Tool) and theoretical analysis. The results of performance evaluation show that the patterns of PDR are similar in simulation and analysis according to route stability. The faster mobile nodes' velocity and the smaller source node's direct guided reigion, the lower route stability and PDR and the higher delay and control overhead related to this.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.175-185
• /
• 2011

The threshold level of a receiver is analyzed for the simplification of system and the improvement of upstream data ratios in optical subscriber network of which the upstream date rate and the optical transmitted power are changed to meet the requested BER (Bit Error Rate) defined per interactive multimedia services. In asynchronous optical subscriber network of which the upstream to downstream data ratios are 1:1/2, 1:1/4, 1:1/8 and 1:1/16 with manchester coded downstream and NRZ (Non Return to Zero) downstream re-modulation, the BER performance is theoretically analyzed and it is performed by simulation with MATLAB according to the four types of downstream data for four models. The results have shown that in the cases which the upstream to downstream data ratios are 1:1/4, 1:1/8 and 1:1/16 the conventional receiver with threshold level of 1/2 can be applied regardless of average received optical powers and the BER is not much deteriorated compared with using the optimal threshold level. In the case that the upstream to downstream data ratio is 1:1/2 the threshold level in an optical receiver could be fixed at 1/3 and the BER is not much deteriorated compared with using the optimal threshold level as the average received optical power increases.

• Journal of Korea Port Economic Association
• /
• v.24 no.3
• /
• pp.79-99
• /
• 2008

All the major ports around the world as well as those in Korea have been exploring their own strategies to survive rapidly changing marine transport environment worldwide. In particular, Busan New Port under development still fails to meet expected logistical traffic, although it operates 6 berths. That is why it is necessary to point out current challenges in logistical strategy of Busan New Port for fully dealing with logistical traffic. Therefore, this study can propose the following ways to facilitate logistical traffic of Busan New Port. First, it is necessary to apply equal tariff to incentives given to shipping agent under the associations between existing harbors and Busan New Port. Second, it is required to increase governmental subsidy for truck freight transport. Third, it is demanded to seek possible ways to transport export and import freight and thereby create independent logistical traffic. Fourth, it is necessary to contact shipping agents residing in new ports and establish a logistical program for shipping freights via Europe, Middle East and Russia as well as those by way of North America, Japan, Korea and China, ultimately making sustainable marketing strategy to create a series of continuous transshipment freight, not temporary one. Finally, it is advisable to operate networked logistical programs with small- or medium-sized overseas shipping agents in business association with large-scale overseas shipping agents.

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.560-568
• /
• 2020

In recent years, as network technology develops, the usage of streaming services by users is increasing. However, the complexity of streaming services is also increasing due to various terminal environments. Even when streaming the same content, it is necessary to re-encode the content according to the type of service. In order to solve the complexity and latency of the streaming service, Moving Picture Experts Group (MPEG) has standardized the Common Media Application Format (CMAF). In addition, as content transmission using a communication network becomes possible, the Republic of Korea's Ultra High Definition (UHD) broadcasting standard has been enacted as a hybrid standard using a broadcasting network and a communication network. The hybrid service enables various services such as transmitting additional information of contents or providing user-customized contents through a communication network. The Republic of Korea's UHD transmission standard utilizes MPEG Media Transport (MMT), and Mobile MMT is an extension of MMT to provide mobile network-specific functions. This paper proposes a method of inserting CMAF contents suitable for various streaming services using signaling messages of MMT and Mobile MMT. In addition, this paper proposes a model for content insertion system in heterogeneous network environment using broadcasting and communication networks, and verifies the validity of the proposed technology by checking the result of content insertion.