• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.202-206
• /
• 2011

본 연구에서는 정체성 수역인 신갈호를 대상으로 저층 퇴적물의 오염물질에 대한 조사를 실시 하였다. 신갈호 저층 퇴적물의 분석 결과, 함수율의 범위는 49.0~68.2%로 조사되었으며, 평균 함수율은 60.8%로 나타났다. 함수비의 경우에는 지점별 96.1~214.6%의 넓은 범위를 보였으며 평균 함수비는 165.8%로 조사되었다. 퇴적물의 pH는 모든 지점에서 산성을 띄었으며, 하류부로 갈수록 더욱 낮아지는 경향을 보였다. 입도분석 결과, 토성은 SL(사양토) 및 SiL(실트질양토)로 나타났으며, 이러한 토성분포는 입자별 침강속도에 의한 것으로 퇴적물의 지점별 이 화학적 특성에 많은 영향을 줄 것으로 판단된다. 유기물 함량 분석결과, 강열감량의 경우 8.22~11.36%로 평균 10.22% 의 유기물 함량을 보였으며, COD는 24,92 mg/kg~27,38 mg/kg의 값으로 평균 26,16 mg/kg로 조사되었다. 영양물질 함량 분석결과, T-N의 경우 신갈호 저층 퇴적물 평균 2,916 mg/kg의 질소 함량을 보였으며, T-P의는 평균 710 mg/kg로 조사되었다. 영양물질 함량 분석결과 하류부로 갈수록 높아지는 경향을 보였으나 총질소의 경우 지점별 비슷한 값을 보인 반면, 총인은 지점별 큰 차이를 보였다. 퇴적물의 중금속 함량은 Cd, Cu, Zn, $Cr^{6+}$, Pb을 분석하였으며, Cd 0.10~0.12 mg/kg, Cu 18.33~20.67 mg/kg, Zn 82.73~110.15 mg/kg, $Cr^{6+}$ 0.78~0.93 mg/kg Pb 11.04~14.53 mg/kg의 범위를 보였으며, 지점별로 큰 차이를 보이지 않았다. 본 연구의 자료는 신갈호 유역의 개발계획 및 준설 검토에 대한 유용한 자료로 활용 가능할 것으로 판단된다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.142-142
• /
• 2003

본 연구에서는 kiwifruit 과육 속에 들어 있는 단백질분해효소의 gelatin분해활성을 조사하고 그 산업적 방안을 검토하였다. Kiwifruit 과육에서 3개의 단백질분해효소의 활성 밴드(PI, PII, PIII)가 관찰되었다. 단백질분해효소 PI은 220 kD, PII는 51 kD, PIII는 26 kD에 해당하는 것으로 추정할 수 있었다. 이들 단백질분해효소 PI, PII, PIII는 모두 pH 2.0~5.0 범위에서 높은 활성을 보였으며 pH 4.0에서 가장 높게 나타났다. 이들 단백질분해효소 PI, PII, PIII는 모두 cysteine proteinase 저해제인 E-64와 iodoacetate에 의해서 저해되었으며, cysteine proteinase를 촉진하는 DTT, cysteine 및 $\beta$-mercaptoethanol에 의해서 활성이 증가하였다. 그 중 단백질분해효소 PIII는 분자량과 효소의 특성으로 보아 actinidin (EC 3.4.22.14)과 동일한 것으로 판단되었다. 단백질분해효소 PI, PII, PIII는 모두 $Ca^{2+}$, $Mg^{2+}$과 $Mn^{2+}$에 의해 촉진되었으며, $Zn^{2+}$과 Hg$^{2+}$에 의해 완전히 저해되는 것으로 나타났다. 하지만, Co$^{2+}$, Cu$^{2+}$, $Al^{3+}$ , Fe$^{3+}$ 등 금속이온의 영향은 다소 다르게 나타났다. Kiwifruit 과육의 단백질분해효소 PI, PII, PIII 중에서 PI과 PII는 온도가 증가함에 따라 활성이 점차 낮아졌으나 PIII는 비교적 안정한 것으로 조사되었다. 특히, PIII는 5$0^{\circ}C$ 이내의 범위에서 48시간 경과시에도 75% 이상의 활성을 보여 이 범위의 온도에서는 상당 시간 동안 안정한 것으로 나타났다. 단백질분해효소의 산업적 가치를 고려해 볼 때 우선적으로 넓은 기질특이성과 열안정성이 높아야 한다. Kiwifruit에서 추출한 단백질분해효소는 4$0^{\circ}C$ 전후에서 최대의 활성을 보이고, 고온에서도 상당 시간 비교적 안정한 특성을 보여 식품제조, 식육연화 등 식품산업 분야에서의 활용가능성이 높을 것으로 보이며, 나아가 단백질이 갖는 식품학적 기능성을 높이는 데에도 사용할 수 있을 것으로 판단된다.

• Korean Journal of Optics and Photonics
• /
• v.25 no.2
• /
• pp.61-66
• /
• 2014

We report the characterization of a wavelength-swept laser (WSL) using a polygon-based wavelength scanning filter and two semiconductor optical amplifiers (SOAs). The output intensity and scanning bandwidth of the WSL depend on the position of the two SOAs in the laser cavity and the coupling ratio of the output fiber coupler. The outputs of the WSL are characterized for coupling ratios of 10%, 30%, 50%, 70%, and 90% for the output fiber coupler. In the setup in which the output fiber coupler is located between the two SOAs, high output power and wide scanning bandwidth can be achieved with an optimized configuration. Using the optimized configuration of the WSL, the intensity increases with the coupling ratio. These results can be used to construct an optimized WSL using the polygon-based wavelength scanning filter.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.4
• /
• pp.418-425
• /
• 1988

Since conventional computer program is workable only with velocity boundary condition, in practical fluid passage such as clean room which usually have wide inlets and outlets, it is not easy to measure velocity itself because of its vector property. Furthermore a certain assumption of velocity at boundaries may lead to physically unreasonable results. From this motivation, we have developed a computer program to predict whole flow field imposed on pressure-based boundary condition which can be measured by relatively simple method. The only additional velocity boundary condition that should be imposed on to make the problem unique, are no slip condition at all walls and zero cross stream velocity at inlet. The result of present study was compared with that by Bernoulli equation being used practically. They were coincident well each other within 5%, therefore the validity of the present method is proved. In the present work, the flow field in a clean room subject to pressure-based boundary conditions at an inlet and two exits was predicted numerically. The pressure difference between the inlet and the left exit which keeps relatively low pressure among two exits is fixed as 150[Pa] and the pressure at the right exit is varied from zero to 150[Pa] by the increment of 25[Pa]. For each cases the flow characteristics in the clean room, the velocity profile at the inlet, and the flow rate through the two exits was predicted. The flow rate through the right exit imposed on relatively higher pressure than the left exit decreased linearly according to the increase of pressure of the right exit. When the pressure of the right exit is increased enough to cause back flow at the exit, the flow rate is rapidly decreased.

• The Journal of Engineering Geology
• /
• v.27 no.1
• /
• pp.59-66
• /
• 2017

The characteristic of recent rainfall pattern in Korea is concentrated in summer season and it is very different compare with former characteristic. In 2011, there was heavy rainfall in Chuncheon city of northern part of Korea. Because of rainfall in short time, many landslides were occurred in narrow area and many people were killed by these landslides at that time. The purpose of this study is to calculate run-out distance of debris flow and analyze the movement properties of debris flow according to the elapsed time using numerical analysis method at that time. The debris 2D program, which is developed by prof. Liu in National Taiwan University, was used in this study. Run-out distance of debris flow was calculated under different yield strength conditions which were controlled by rainfall amount. The results reveal that absolute maximum velocity of the debris flow is about 8.1 m/s and maximum depth of debris flow is about 7 m when debris flow was occurred. The run-out distance after 500 sec is about 300 m from end of the valley. It is very well similar with actual debris flow run-out distance. From these results, we can presume the maximum velocity and depth of debris flow at that time.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.36-41
• /
• 1998

In this study, the extraction of Co(Ⅱ) and Cu(Ⅱ) into chloroform solution of dithizone, distribution ratios, extractabilities and extraction rate constants of the metal complexes were compared in each case with which thiocyanate ion was or not used as the auxiliary ligand. The use of the thiocyanate ion increased threefold the distribution ratio for Co(Ⅱ) complex in a basic solution and twofold for Cu(Ⅱ) complex in a wide pH range. And the extractability was also augmented from about 90 to 99 for Co(Ⅱ) and from 95 to 99 for Cu(Ⅱ) in a given period. The extraction rate constants were $k_1\;:\;1.2{\times}10^5$, $k_2\;:\;1.34{\times}10^{17}\; mol^{-1}dm^3s^{-1}$ in case of Co(Ⅱ) and$k_1\;:\;1.1{\times}10^8$, $k_2\;:\;2.83{\times}10^{10}\; mol^{-1}dm^3s^{-1}$ in case of Cu(Ⅱ) on the extraction of dithizonate complexes into chloroform solution.

• Journal of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.328-334
• /
• 1984

A series of phenyl N-benzenesulfonylchloroformimidate derivatives (p-H, p-Cl, p-CH3 & p-OCH3) were prepared and the hydrolysis of these compounds were studied kinetically at various pH by UV spectrophotometry in 1 ; 4 dioxane-water at $25^{\circ}C$. Hammett ${\rho}$ values measured at pH 5.0 (${\rho}$ = -0.45) and pH 10.0 (${\rho}$ = 0.40) indicate that the reaction proceeds via an azocarbonium ion intermediate in the acidic medium, whereas, it involves direct attack by hydroxide ion on the azomethine carbon atom occurs under the basic medium. The formation of stabilized azocarbonium ion species at pH 5.0 is also consistent with the large solvent effect(m = 1.3-1.5 & n = 5.0-5.5). On the basis of these findings, we may concluded that the hydrolysis of phenyl N-benzenesulfonylchloroformimidate derivatives proceeds by $SN_1$ below pH 8.0, however, above pH 10.0, the hydrolysis proceeds through $SN_2$ and in the range of pH 8.0-10.0, these two reactions occur competitively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.165-165
• /
• 2007

투명전도박막은 ITO, $SnO_2$, ZnO, 등이 있으나 $SnO_2$는 자외선 영역까지 투과시키는 우수한 광학적 특성을 나타내지만, 상당히 큰 전기저항으로 인해 현재는 현재 ITO가 널리 이용되고 있다. ITO(Indium Tin Oxide)박막은 자외선 영역에서 반사율이 높으며 가시광선영역에서는 80%이상의 뛰어난 투과율을 가지고 있다. 또한 낮은 전기저항과 넓은 광학적 밴드갭 때문에 가장 유용한 투과전도성 재료 중에 하나이다. 이러한 특성 때문에 여러 가지 문자 표시소자의 투명전극, 태양전지의 창재료, 정전차폐를 위한 반도체 포장재료, 열반사막, 면발열체, 광전변환 소자에 응용되고 있다. 일반적으로 박막의 제작에는 저항가열법과 전자선가열법, 스퍼터링법의 물리적 증착과 화학적 증착으로 나뉜다. 본 논문에서는 증착온도를 달리 하여 RF-sputtering에 의해 ITO박막을 증착한 후 온도증가에 따른 박막의 특성을 연구하였으며 또한 광역평탄화를 위한 CMP공정을 적용하여 증착온도가 연마에 미치는 영향을 연구하였다. 본 실험에서 사용된 ITO박막은 $2{\times}2Cm$의 Corning glass위에 증착되었으며 타겟은 $In_2O_3$와 $SnO_2$가 9:1로 혼합된 Purity 99.99%이상의 직경 2 inch인 ITO타겟을 사용하였다. 박막 증착시 기판온도는 상온에M $200^{\circ}C$까지 변화시켰으며 RF power는 100W로 일정하게 하였으며 증착압력은 $8{\times}10^{-2}$Torr이였다. CMP공정조건은 헤드속도 60rpm, 플레이튼 속도 60rpm, 슬러리 주입 유량 60mml/min, 압력 $300g/cm^2$이였다. 전기적 특성은 four point probe를 이용하여 측정하였으며 광학적 특성은 UV-Visible Spectrometer를 이용하여 200~900nm의 파장범위에서 광투과도를 측정하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.23-29
• /
• 2016

Zinc oxide of hexagonal wurzite, is known as n-type semiconductor. It has a wide band gap energy of 3.37 eV and large exciton binding energy of 60 meV. It can be widely applied to gas sensors, laser diodes, dye-sensitized solar cells and degradation of dye waste. The use of microwave hydrothermal synthesis brings a rapid reaction rate, high yield, and energy saving. Amine additives control the different particle shapes because of the chelate effect and formation of hydroxide ion. In this study, zinc nitrate hexahydrate was used as zinc precursor. In addition, ethanolamine, ethylenediamine, diethylenetriamine, and hexamethylenetetramine are used as shape control agent. The pH value was controlled as 11 by NaOH. The shapes of zinc oxide are star-like, rod, flower-like, and circular cone. In order to analyze physical, chemical, and optical properties of ZnO with diverse amine additives, we used XRD, SEM, EDS, FT-IR, UV-Vis spectroscopy, and PL spectroscopy.

• Korean Journal of Microbiology
• /
• v.49 no.1
• /
• pp.90-94
• /
• 2013

A new Bacillus strain designated as MP56 producing antimicrobial substance has been isolated from the mud flat of Korea. The strain MP56 was found to exhibit broad spectrum of antimicrobial activity against Gram-positive pathogenic microorganisms and MDR (multi drug resistant) strains. The 16S rRNA sequence revealed that the MP56 was closely related to Bacillus subtilis with 99.93% homology. The optimal medium composition for production of antimicrobial substance in the B. subtilis MP56 were 1% mannitol, 1% oat meal, 0.01% $CaCl_2$. Antimicrobial activity of the culture broth against different pathogenic strains was assessed using the antimicrobial spectrum. The result suggests that Bacillus strain MP56 produces high quality antimicrobial substance that might be very useful to control varieties of pathogenic microbial growth.