• Korean Journal of Food Science and Technology
• /
• v.38 no.5
• /
• pp.635-641
• /
• 2006

In an attempt to find ways of improving the quality and sanitary state of dried squid, this study compared artificial drying methods i.e. hot air drying and cold air drying with natural drying method. The drying rates of squid were in the order of hot air, cold air and natural drying. However, cold-air drying was slower than natural drying at $7^{\circ}C$. The drying rates increased with increasing drying temperature. When drying temperature was close to the dew point on a dehumidifier surface, which was the case with cold air drying at $7^{\circ}C$, the driving force for dehumidification was lower than under other drying conditions, which resulted in a lower drying rate. There were little color differences between the drying methods and temperature. Squid dried by cold air-drying had better mechanical texture and sensory qualities than with other drying methods. In addition, the cold air drying method maintained superior quality in terms of the contents of amino acids, taurine, EPA, DHA, other fatty acids and a low TBA value than the other drying methods.

• Journal of Bio-Environment Control
• /
• v.11 no.2
• /
• pp.81-87
• /
• 2002

This study was conducted to investigate the cooling efficiency and growth of tomatoes by root zone cooling device using a pad-box and cultivated system. The structure of the root zone cooling system using a pad-box was four piece of pads bonded an the side and a fan set at the bottom. Cool wind was generated by the outside air which was punched at intervals of 10 cm along three rows. Cold wind flowed to the root zone in the culture medium. The root zone cooling efficiency of cold wind generation by using a pad-box flowing through a wet-pad was determined. Major characteristic of this cuttural system consist of bed filled with a perlite medium and a ventilation pipe using PVC. The cold wind generation by a pad box (CWP) was compared to that of cold wind generation by a radiator (CWR), cold water circulation using a XL-pipe (CWX) and the control (non-cooling). When the temperature of water supplied was 16.2-18.4$^{\circ}C$, temperatures in the medium were 20.5~23.2$^{\circ}C$ for CWP 22.7~24.2$^{\circ}C$ for CWR, 22.8~24.27$^{\circ}C$ for CWX and 23.1~-29.6$^{\circ}C$ for the control. The results show that the cold wind temperature using the pad-box was lower by 1~2$^{\circ}C$ than that of cold water circulation in the XL-pipe and lower by 5~6$^{\circ}C$ than that of the control. Growth such as leaf length, leaf width, fresh weight and dry weight, was greater in three root zone cooling methods than in the control. Root activity was higher in the rat zone cooling methods than in the control. However, there was no significant difference among root zone cooling methods.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.2
• /
• pp.68-76
• /
• 2018

A vortex tube is a simple energy separating device that splits a compressed air stream into a cold and hot stream without any external energy supply or chemical reactions. The efforts of many researchers and designers have been focused on improvement of vortex tube efficiency by changing the parameters affecting vortex tube operation. The effective parameters are nozzle specifications and inflow pressure conditions. Effects of different nozzle cross-sectional area and number of nozzles are evaluated by computational fluid dynamics (CFD) analysis. In this study, CFD analysis of 3-D steady state and turbulent flow through a vortex tube was performed. We investigated the cold air mass flow rate, the cold air temperature, and the cold air heat transfer rate behavior of a vortex tube by utilizing seven straight nozzles and four inflow pressure conditions.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.44-48
• /
• 2008

This experiment was conducted to examine the effect of injecting cool air from an abandoned mine during the summer time for the growth of Doritaenopsis. The air temperature of abandoned mine in Boryeong was $12{\sim}14^{\circ}C$. The day and night temperatures were set at $22^{\circ}C$ and $20^{\circ}C$, respectively, from June to August in the experimental plastic house. This temperature range was within the suitable range for floral induction in Doritaenopsis. Average outside temperature was $28.4{\sim}32.8^{\circ}C$. The 3% of the crop developed flower stalk in 20 days after the treatment initiation, 65% in 45 days, and 100% in 90 days. The flower stalk length was short (48.7cm) in 30 days and long (62.4cm) in 60 days of treatment. The flower stalk length became longer as time passed. Flower spike and number of florets per stalk displayed the same tendency. Number of nodes was 6~7 and was not affected by the period. The first blooming appeared on 15th of September at 45 days and blooming tended to appear late as the period is lengthened. When the cool air from an abandoned mine was injected, the crop formed flower stalk three months earlier and bloomed four months earlier than the untreated control.

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.508-515
• /
• 2004

In this study, salting conditions and dehydration methods were investigated. Salting time, concentration and temperature could be considered to variables in salting conditions. The diffused salt amounts to beef jerky depending on time are sharply increased in two hours. This result is caused by the difference decrease of concentration gradient between bulk solution and beef jerky. The increase of salting concentration and temperature resulted also in the increase of a diffused salt. The deeper bulk concentration made diffusion to beef easily with the bigger driving force and the movement of molecules is more active according to temperature increase. Dehydration is conducted with various methods such as natural drying, cold air drying and hot air drying. Comparing with color and texture among the drying methods, cold air drying showed superior quality in color and texture. Beef jerky by cold air drying colored more reddish than other drying methods and good cutting shear stress and tensile strength. In case of hardness and chewiness, hot air drying method showed the highest value, which means the worst texture.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.3
• /
• pp.192-197
• /
• 2000

To develop plain dried products of large anchovy, Engraulis japonica, lipid oxidation during drying of large anchovy and optimal drying condition were investigated. The moisture contents of large anchovy on 7 hrs dryness were $ 9.0{\%},\;34.0{\%},\;38.0{\%} and\;38.8{\%}\;in\;60^{\circ}C$ hot-air drying (wind velocity, 1.4m/sec), $40^{\circ}C$ hot-air drying (wind velocity, 1.4 m/sec), sun drying($30{\pm}5^{\circ}C$) and $20^{\circ}C$ cold-air drying (wind velocity, 3.1 m/sec), respectively. The cold-air drying depressed remarkably the lipid oxidation of large anchovy during drying, resulting from AV, POV, COV and the formation of browning pigment. The fatty acid composition of large anchovy was $35.8{\%} in saturates, 20.0{\%} in monoenes and 44.2{\%}$ in polyenes. Saturates and monoenes were increased in proportion to the increase of drying time, while polyenes were decreased. The contents of 20 : 5 and 22 : 6 of polyenes were decreased remarkably in proportion to the progress of lipid oxidation, while 14 : 0, 16 : 0, 16 : 1 and 18 : 1 of saturates and monoenes were increased. The changes in fatty acid compositions by drying conditions were remarkably clarified in sun drying, followed by $60^{\circ}C$ hot-air drying $40^{\circ}C$ hot-air drying and $20^{\circ}C$ cold-air drying in order.

• Food Science and Preservation
• /
• v.22 no.1
• /
• pp.1-11
• /
• 2015

Raspberries are a good resource of polyphenols and have a powerful antioxidant activity, but shelf life for raspberries is short which brings a lot of economic losses. In this study, we try to use cool-air ($20{\sim}40^{\circ}C$) or hot-air ($60{\sim}100^{\circ}C$) to produce semi-dried raspberries with extended shelf life, and to determine the best method for improving fruit quality by minimizing nutrient losses during drying processes. The effects of process variables (drying temperature and processing time) on the quality of final dried raspberries were investigated. Response surface methodology was employed to establish statistical models for simulating the drying processes, and the moisture residue content and the loss ratios of total phenolic content (TPC), vitamin C (VC), and ellagic acid (EA) that result from the drying processes of raspberries using either hot or cool-air were predicted. Superimposed contour plots have been successfully used in the determination of the optimum zone within the experimental region. Optimal conditions determined for achieving minimal losses of TPC, VC, and EA, and a final moisture residue of 45% using the hot-air drying process were a drying temperature of $65.75^{\circ}C$ and a processing time of 4.3 hr. While for the cool-air process, the optimal conditions predicted were $21.3^{\circ}C$ and 28.2 hr. Successful application of response surface methodology provided scientific reference for optimal conditions of semi-drying raspberries, minimizing nutrient losses and improving product quality.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.879-884
• /
• 2006

Jinan Poonghyeol in Chonbuk province Is famous for emitting cool air in summer and warm air in winter. Cause for these phenomena is studied by measuring temperature, humidity and air velocity of several locations around Jinan Poonghyeol Temperature variations under the ground are also measured. Analyzing data compiled from July 21, 2005 through May 26, 2006, it is presumed that storage effect of rocks and soil in this area and buoyance effect are the main causes for this mysterious natural air-conditioning phenomena.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.4
• /
• pp.526-534
• /
• 2011

Cold air drying was conducted on steamed chestnut-sweet potato to improve its quality, convenience, and preference as snack. Steamed sweet potato was dried from 10 to $25^{\circ}C$ for 48 hours, and moisture contents, colors, texture, and taste were evaluated. The lowest moisture content was 4.53% at $25^{\circ}C$. Lightness decreased while other color values (a, b, and ${\Delta}$E) increased with increasing drying temperature and drying time. Reducing sugar and soluble solid contents ranged from 93.22~190.35 mg/g and 17~60 $^{\circ}Brix$, respectively. The highest hardness of chestnut-sweet potato was 25.13 kgf/$cm^2$, and springiness and cohesiveness were 88.60, and 94.87%, respectively, when dried at $25^{\circ}C$ for 48 hours. Sensory evaluation score was highest at $20^{\circ}C$ for 24 hours. The optimum drying conditions were determined to be $19^{\circ}C$ and 39.5 hours by RSM(response surface methodology).

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.74-80
• /
• 2015

In this study, the microbial control effect after treatment of washing solutions (tap water, electrolyzed water, chlorine dioxide solution) and quality changes were investigated when Kwamegi is produced by means of the cold air drying. The initial moisture rate of the sample was 56.62% before drying. At the beginning of drying period, moisture rate sharply fell down but as the experiment progressed, moisture reducing rate was smoothly decreased. The color difference of Kwamegi before drying was 42.40, but it was reduced depending on the increment of drying temperature and time. TBA value of the initial sample was 0.219, rancidity were increased continuously when drying progressed. Total amino acid content was showed the highest value at $25^{\circ}C$ for 36h and the lowest at $40^{\circ}C$ for 12h. From the fatty acids analysis, major fatty acids were consisted of the 14:0, 16:0 and 18:1 (18.1520.96%, 28.0632.51% and 17.0619.81%, respectively). The microbial control effect was biggest when Kwamegi was washed with chlorine dioxide 100ppm for 60s. The microbe of the Kwamegi, Pseudomonas sp. and Pseudomonas putida were identified.